+7 (812) 645-08-06
Power chokes and inductors
select brand
AC reactor choke AC - 220V 380V 525V 690V 1140V | 0.75kw~3550kw | FWI-CKI3
FWI-CKI3 Three phase 380v Input/output AC reactor (choke)
Description
Functions of AC reactor (choke):
1.Reduction of harmonics , Improvement of the power factor
2.Over-voltage restriction
3.Reducing the stress caused by noise to motor, extended the life span of motor
4.Improvement of low-frequency conduction emission/sensitivity
Technical specifications...
Description
Functions of AC reactor (choke):
1.Reduction of harmonics , Improvement of the power factor
2.Over-voltage restriction
3.Reducing the stress caused by noise to motor, extended the life span of motor
4.Improvement of low-frequency conduction emission/sensitivity
Technical specifications...
AC reactor choke AC - 220V 380V 525V 690V 1140V | 0.75kw~3550kw | FWI-CKI3
FWI-CKI3 Three phase 380v Input/output AC reactor (choke)
Description
Functions of AC reactor (choke):
1.Reduction of harmonics , Improvement of the power factor
2.Over-voltage restriction
3.Reducing the stress caused by noise to motor, extended the life span of motor
4.Improvement of low-frequency conduction emission/sensitivity
Technical specifications...
Description
Functions of AC reactor (choke):
1.Reduction of harmonics , Improvement of the power factor
2.Over-voltage restriction
3.Reducing the stress caused by noise to motor, extended the life span of motor
4.Improvement of low-frequency conduction emission/sensitivity
Technical specifications...
Power inductor / SMD / energy storage / high-current - max. 20 A, 0.5 - 18.80 μH | PB1212 Series
Low cost energy storage choke with high current for telecom,PLC and consumer market.
Nominal...
Nominal...
Power inductor / SMD / energy storage / high-current - max. 20 A, 0.5 - 18.80 μH | PB1212 Series
Low cost energy storage choke with high current for telecom,PLC and consumer market.
Nominal currents: up to 20 Amps.
Nominal inductance: from 0,5μH to 18.8μH.
Low profile with SMD format.
Low losses due rectangular wire is used.
Three soldering points to improve vibration test.
Rohs Compliance
Nominal currents: up to 20 Amps.
Nominal inductance: from 0,5μH to 18.8μH.
Low profile with SMD format.
Low losses due rectangular wire is used.
Three soldering points to improve vibration test.
Rohs Compliance
High-voltage line trap - 40 - 500 kHz
Line traps direct the high-frequency telecommunication signal to the appropriate lines, blocking the transmission to the others, and avoiding losses and interferences.
High-voltage line trap
Line Traps direct the carrier signal to the appropriate lines, blocking the transmission to the rest, and thus avoiding loss of the carrier signal power and interferences.