+7 (812) 645-08-06
Linear potentiometer position sensors
select brand
Linear position sensor - 1 - 50 kΩ | 3046, 3048
A spin-off of the Trimpot® trimming potentiometer product line, the linear motion potentiometer...
Linear position sensor - 1 - 50 kΩ | 3046, 3048
A spin-off of the Trimpot® trimming potentiometer product line, the linear motion potentiometer...
Linear position sensor / potentiometer - 0 - 250 mm | 8709
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion...
Linear position sensor / potentiometer - 0 - 250 mm | 8709
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion...
Linear position sensor / potentiometer - 0 - 150 mm | 8710, 8711
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the...
Linear position sensor / potentiometer - 0 - 150 mm | 8710, 8711
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.
The driving rods are guided in long-life, low-friction sliding bearings with close tolerances; this results in highly precise measurements. Lateral forces reduce the service life and can be avoided by using, for instance, ball joint couplings, included in the burster product range.
Due to the pump effect, the driving rod has double sliding bearings.
The driving rods are guided in long-life, low-friction sliding bearings with close tolerances; this results in highly precise measurements. Lateral forces reduce the service life and can be avoided by using, for instance, ball joint couplings, included in the burster product range.
Due to the pump effect, the driving rod has double sliding bearings.
Linear position sensor / potentiometer - 0 - 150 mm | 8712, 8713
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance...
Linear position sensor / potentiometer - 0 - 150 mm | 8712, 8713
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and a long-term stability.
The rods are guided in long-life, low friction sliding bearings with close tolerances which provide high durability and measuring quality. The pre-stressed spring presses the sensor tip against the measurement object. This spring is double-guided and disappears in the probe head, if the rod is in its end position.
The probe tip consists of a ball made of stainless steel. The bore at rod end serves for coupling retraction units. The rod is protected against twist for measurement ranges up to 50 mm. The probe tip (hexagonal) must not be turned by any tool, otherwise its anti-twist protection will be destroyed.
The rods are guided in long-life, low friction sliding bearings with close tolerances which provide high durability and measuring quality. The pre-stressed spring presses the sensor tip against the measurement object. This spring is double-guided and disappears in the probe head, if the rod is in its end position.
The probe tip consists of a ball made of stainless steel. The bore at rod end serves for coupling retraction units. The rod is protected against twist for measurement ranges up to 50 mm. The probe tip (hexagonal) must not be turned by any tool, otherwise its anti-twist protection will be destroyed.
Linear position sensor / potentiometer - 0 - 2000 mm | 8718
Displacement sensors model 8718, using a resistance track made of conductive plastic material, are suitable for direct, accurate and absolute measurements of displacements and lengths.
Special processes...
Special processes...
Linear position sensor / potentiometer - 0 - 2000 mm | 8718
Displacement sensors model 8718, using a resistance track made of conductive plastic material, are suitable for direct, accurate and absolute measurements of displacements and lengths.
Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.
The vibration-cushioned slider allows a clear signal output even by slight shocks or high operating speeds up to 10 m/s. Due to its simple design the sensor is largely protected against electrical interference fields (Al-housing), it keeps the measured value after a power failure and does not generate any electrical interference.
A magnetically hold steel band covers the whole measurement device gap free. Any lateral forces are avoided by a ball joint coupling mounted to the sensor.
Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.
The vibration-cushioned slider allows a clear signal output even by slight shocks or high operating speeds up to 10 m/s. Due to its simple design the sensor is largely protected against electrical interference fields (Al-housing), it keeps the measured value after a power failure and does not generate any electrical interference.
A magnetically hold steel band covers the whole measurement device gap free. Any lateral forces are avoided by a ball joint coupling mounted to the sensor.
Linear position sensor / potentiometer - 50 - 900 mm | 8719
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the...
Linear position sensor / potentiometer - 50 - 900 mm | 8719
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.
The rod is guided in a low-play floating frontal bearing. This absorbs small angular and parallel displacements. The guide lug and slide block have particularly tight tolerances, in order to ensure reliable slider contact.
A ball joint coupling (see accessories) at the end of the sliding shaft minimizes axial errors between the sensor and the equipment.
The rod is guided in a low-play floating frontal bearing. This absorbs small angular and parallel displacements. The guide lug and slide block have particularly tight tolerances, in order to ensure reliable slider contact.
A ball joint coupling (see accessories) at the end of the sliding shaft minimizes axial errors between the sensor and the equipment.
Linear position sensor / potentiometer / subminiature release - 1.25 - 10 kΩ | MLP series
* miniature series
* 0.5-in. to 6-inch full stroke ranges
* 0.5 % linearity
* 1.25k - 10k ohms
* 25+ million cycles
Celesco's...
* 0.5-in. to 6-inch full stroke ranges
* 0.5 % linearity
* 1.25k - 10k ohms
* 25+ million cycles
Celesco's...
Linear position sensor / potentiometer / subminiature release - 1.25 - 10 kΩ | MLP series
* miniature series
* 0.5-in. to 6-inch full stroke ranges
* 0.5 % linearity
* 1.25k - 10k ohms
* 25+ million cycles
Celesco's miniature MLP series linear potentiometers offer unrivaled performance in an amazingly small size. Though small, the MLP is environmentally robust, operates over a broad temperature range and has a cycle life greater than 25 million cycles.
These features make our miniature MLP linear potentiometer the perfect solution for many applications including industrial, medical, aerospace, automotive and motion control.
* 0.5-in. to 6-inch full stroke ranges
* 0.5 % linearity
* 1.25k - 10k ohms
* 25+ million cycles
Celesco's miniature MLP series linear potentiometers offer unrivaled performance in an amazingly small size. Though small, the MLP is environmentally robust, operates over a broad temperature range and has a cycle life greater than 25 million cycles.
These features make our miniature MLP linear potentiometer the perfect solution for many applications including industrial, medical, aerospace, automotive and motion control.
Linear position sensor - 2.5 - 11.6 kΩ | CLP series
* 1-in. to 11.5-inch full stroke ranges
* 0.1 % - 0.2 % linearity
* 2.5k - 11.6k ohms
* 25+ million cycles
Developed specifically...
* 0.1 % - 0.2 % linearity
* 2.5k - 11.6k ohms
* 25+ million cycles
Developed specifically...
Linear position sensor - 2.5 - 11.6 kΩ | CLP series
* 1-in. to 11.5-inch full stroke ranges
* 0.1 % - 0.2 % linearity
* 2.5k - 11.6k ohms
* 25+ million cycles
Developed specifically to meet the needs of the auto racing industry and proven in industrial applications, Celesco's CLP series position transducers offer unrivalled performance in terms of accuracy, repeatability, life expectancy and ease of mounting.
The combination of individually corrected conductive plastic elements and precious metal wipers provide a cost effective measuring system which can operate effectively without being unduly influenced by external environmental conditions.
* 0.1 % - 0.2 % linearity
* 2.5k - 11.6k ohms
* 25+ million cycles
Developed specifically to meet the needs of the auto racing industry and proven in industrial applications, Celesco's CLP series position transducers offer unrivalled performance in terms of accuracy, repeatability, life expectancy and ease of mounting.
The combination of individually corrected conductive plastic elements and precious metal wipers provide a cost effective measuring system which can operate effectively without being unduly influenced by external environmental conditions.
Linear position sensor - 5 - 10 kΩ | CLWG series
3-in. to 30-inch full stroke ranges
0.04 % - 0.1 % linearity
5k - 1k ohms
50+ million cycles
The...
0.04 % - 0.1 % linearity
5k - 1k ohms
50+ million cycles
The...
Linear position sensor - 5 - 10 kΩ | CLWG series
3-in. to 30-inch full stroke ranges
0.04 % - 0.1 % linearity
5k - 1k ohms
50+ million cycles
The CLWG series was designed for a wide range of demanding automation and robotic applications.
Outstanding linearity and accuracy are acheived using a conductive plastic resistive element. The wiper system is mounted on the actuating rod and is free of backlash for a long life and trouble free operation.
0.04 % - 0.1 % linearity
5k - 1k ohms
50+ million cycles
The CLWG series was designed for a wide range of demanding automation and robotic applications.
Outstanding linearity and accuracy are acheived using a conductive plastic resistive element. The wiper system is mounted on the actuating rod and is free of backlash for a long life and trouble free operation.