+7 (812) 645-08-06
Robotic crawlers, UAVs ...
select brand
Hexarotor UAV / mini - max. 2 kg, max. 3 280 ft | Aibot-X6 V2
The Aibot X6 V2 from Aibotix features a full array of functions that make the copter easier and...
Hexarotor UAV / mini - max. 2 kg, max. 3 280 ft | Aibot-X6 V2
The Aibot X6 V2 from Aibotix features a full array of functions that make the copter easier and safer to control. The tool uses a virtual safety-zone or geo fence, and minimal flight-altitude for maximum protection. In addition, it provides a broad spectrum of adjustment and expansion possibilities. The Aibot X6 will automatically maintain the alignment towards the POI.
Flight control system / for UAV - AiProFlight
Aibotix's multi-rotor system will come with the ability to automatically navigate via waypoints in a mode that is autonomous. A flight...
Flight control system / for UAV - AiProFlight
Aibotix's multi-rotor system will come with the ability to automatically navigate via waypoints in a mode that is autonomous. A flight planning software, AiProFlight is used in scheduling the flight route. The route is transmitted wirelessly to the Aibot.
The multi-rotor system of Aibotix is able to collaborate with Aibot in order to perform various inspections and mapping missions. The routes can be planned on a tablet PC, laptop or desktop. The device has user friendly and intuitive interface.
The multi-rotor system of Aibotix is able to collaborate with Aibot in order to perform various inspections and mapping missions. The routes can be planned on a tablet PC, laptop or desktop. The device has user friendly and intuitive interface.
UAV - ScanEagle
The ScanEagle, manufactured by Insitu, offers agility and is virtually undetectable. It delivers persistent imagery on land or at sea at a fraction of the...
UAV - ScanEagle
The ScanEagle, manufactured by Insitu, offers agility and is virtually undetectable. It delivers persistent imagery on land or at sea at a fraction of the cost of other surveillance methods. It features a combat-proven and cost effective design. It offers low acoustic, visual, and infrared range signature, an advanced muffler, a modular design, low personnel requirements and 24-hour endurance. Its heavy fuel engine minimizes shipboard logistics and enhances aircraft performance. Inertially stabilized electro-optic or infrared imagers can automatically follow fixed and moving objects for extended periods.
UAV - NightEagle
The NightEagle is a fixed-wing civilian UAV developed by Insitu, Inc.. It has a middle...
UAV - NightEagle
The NightEagle is a fixed-wing civilian UAV developed by Insitu, Inc.. It has a middle wave infrared imager that can see even in moisture laden and hazy environments with a daylight quality imagery. The common ground support instrument allow maximization of the ISR capacity with less investments in equipment and operating footprint.
UAV - Integrator
The Integrator system is manufactured by Insitu company. It is an air-craft that is flexible and multi-mission capable solution for both land and maritime operations. The aircraft’s...
UAV - Integrator
The Integrator system is manufactured by Insitu company. It is an air-craft that is flexible and multi-mission capable solution for both land and maritime operations. The aircraft’s six payload spaces is can be customized using the cameras, communication capabilities and other payloads to suit the user's operational needs. The payload integrator of the unit is 350 W for payload on on board power while for on board connectivity, it is Ethernet (TCP/IP). It is an integrator variant known as the Small Tactical Unmanned Aircraft System (STUAS). The performance of the unit ranges to from the endurance within 24 hours, the ceiling having a >19,500 ft / 5,944 m and a max horizontal speed of 90+ knots / 46.3 m/s.
UAV launcher
This UAV launcher is developed by Insitu, Inc.. It can be launched in an autonomous manner through a pneumatic wedge...
UAV launcher
This UAV launcher is developed by Insitu, Inc.. It can be launched in an autonomous manner through a pneumatic wedge catapult launcher. The launcher provides acceleration to the air vehicles into flight speeds of at most 10 ft to allow launching in unprepared locations. It can launch in any direction in winds of 30 knots.
In addition, the tool is powered for the launching of all Insity aircraft in high altitudes and low air density environments.
In addition, the tool is powered for the launching of all Insity aircraft in high altitudes and low air density environments.
UAV retrieval system
This retriever from Insitu are engineered without nets. This unit is able to protect...
UAV retrieval system
This retriever from Insitu are engineered without nets. This unit is able to protect decks and operate with a small working footprint. It also runs in 35 knot winds. The product makes use of the SkyHook retrieval system which makes use of a suspended cable at 50 ft that catches the aircraft as it flies under it.
Milling robot / for internal pipe - FEH 230-600
The FEH 230-600 from Ibak JS Robotics is a milling robot suitable for internal pipes. The device can be used in all cutting works in pipe...
Milling robot / for internal pipe - FEH 230-600
The FEH 230-600 from Ibak JS Robotics is a milling robot suitable for internal pipes. The device can be used in all cutting works in pipe diameters ranging from 230 mm to 600 mm. This equipment is designed with an integrated driving unit, and rotary module.
The tool is capable of moving forwards to backwards, right to left and up to down. The driving unit can be adjusted for different nominal sizes by fitting different wheel sizes and attachments. This positions the FEH robot module as always central to the pipe axis.
The tool is capable of moving forwards to backwards, right to left and up to down. The driving unit can be adjusted for different nominal sizes by fitting different wheel sizes and attachments. This positions the FEH robot module as always central to the pipe axis.
Milling robot / for internal pipe - FEK 170-300
This Milling robot for internal pipe FEK 170-300 model is intended to perform all works that require cutting. It is consists of a driving unit and can make...
Milling robot / for internal pipe - FEK 170-300
This Milling robot for internal pipe FEK 170-300 model is intended to perform all works that require cutting. It is consists of a driving unit and can make...
Grouting robot / for internal pipe
The VPS Lateral Grouting Systems commonly used to fix faulty side laterals and connections. This systems sport bladder pan...
Grouting robot / for internal pipe
The VPS Lateral Grouting Systems commonly used to fix faulty side laterals and connections. This systems sport bladder pan...