+7 (812) 645-08-06
Electro-optic level switches
select brand
Electro-optic level switch / for liquids / explosion-proof - ATEX | SS 400 Ex series
The Ex-amplifier SS 400 Ex can evaluate the EGE flow sensors for areas that could have gas or dust explosions as classified by ATEX. The classified category 2 equipment can be easily operated...
Electro-optic level switch / for liquids / explosion-proof - ATEX | SS 400 Ex series
The Ex-amplifier SS 400 Ex can evaluate the EGE flow sensors for areas that could have gas or dust explosions as classified by ATEX. The classified category 2 equipment can be easily operated post installation, in zones 1 or 21. The desired limiting value for the connected flow switch can be set on site itself using an LED chain. The relay output can be operational with type 'intrinsic safety' or 'increased safety' protection. The switching signal can easily be routed to the control room from the hazardous zone. The unit complies with the requirements of protection type 'm'/molded, increased safety/'e' and intrinsic safety type/'i' protection. Having an ia protection, the sensor circuit is intended for the connection of an ATEX-certified EGE.
Electro-optic level switch / for liquids
Honeywell sells fiber optic sensors fabricated with Serial Real-time Communication System or SERCOS liquid sensers, transmitters, duplexers,...
Electro-optic level switch / for liquids
Honeywell sells fiber optic sensors fabricated with Serial Real-time Communication System or SERCOS liquid sensers, transmitters, duplexers, and receivers. Each fiber optic sensor is entirely customizable aimed to fulfill and transcend harsh environmental demands. The Duplex model is designed where dual fiber is not economical. The sercos transmitters is used to transmit datas in LAN applications in industries. The sercos receviers gives digital output to tell whether there is liquid or not. The liquid level sensors uses total internal reflection.
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 10 bar | OPG01
The OPG01 is manufactured by Besta. It is a limit value switch that is made from stainless steel....
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 10 bar | OPG01
The OPG01 is manufactured by Besta. It is a limit value switch that is made from stainless steel. The device has a glass tip, cable or plug output, for detection purposes of limit levels of liquid media.
It supports supply voltage from 12 to 32 V DC. It can be mounted in any direction. The housing is stainless steel 1.4305, optional also in stainless steel 1.4571.
It supports supply voltage from 12 to 32 V DC. It can be mounted in any direction. The housing is stainless steel 1.4305, optional also in stainless steel 1.4571.
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 25 bar | OPG02
The Type OPG02 Optical Level Limit Switch is a high quality device made out...
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 25 bar | OPG02
The Type OPG02 Optical Level Limit Switch is a high quality device made out of a stainless steel material to prevent the apparatus from rusting and damaging easily. It provides several high quality features including a PVC, PUR-cable, couplar plug or plug M12 and pressure range of up to 25 bar.
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 25 bar | OPG03
The OPG03 Optoelectronic Level Sensors are optical limit switch made of stainless...
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 25 bar | OPG03
The OPG03 Optoelectronic Level Sensors are optical limit switch made of stainless steel. They have a built-in relay output that has a power supply of 250 V AC and 6 A. These level sensors have an IP65 enclosure and an electrical connection made of aluminum housing that measures 75 x 80 x 57 mm.
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 40 bar | OPG04
The OPG04 model is manufactured by Besta, and is an optical level limit switch...
Electro-optic level switch / for liquids - -30 °C ... +100 °C, max. 40 bar | OPG04
The OPG04 model is manufactured by Besta, and is an optical level limit switch that is ideal for use in refrigeration technologies. The body of the unit is made of nickel-plated steel, and has an ingress protection rating of 65. The prism of the unit is made of glass, and is fused in the body.
Electro-optic level switch / high-temperature - -40 °C ... +170 °C, max. 25 bar | OPG05
The OPG05 series from BESTA is an opto-electronic level sensor that is especially...
Electro-optic level switch / high-temperature - -40 °C ... +170 °C, max. 25 bar | OPG05
The OPG05 series from BESTA is an opto-electronic level sensor that is especially...