+7 (812) 645-08-06
Relay test sets, circuit breaker test sets
select brand
Control software / management - Meltminder® 300
Meltminder® 300 Control System:
Inductotherm’s Meltminder® 300 melt shop control and management...
Inductotherm’s Meltminder® 300 melt shop control and management...
Control software / management - Meltminder® 300
Meltminder® 300 Control System:
Inductotherm’s Meltminder® 300 melt shop control and management...
Inductotherm’s Meltminder® 300 melt shop control and management...
Residual current circuit breakers RCCB tester - PROFITEST DC-II
In combination with the PROFITEST 0100S-II, the DC-II allows for:
Testing...
Testing...
Residual current circuit breakers RCCB tester - PROFITEST DC-II
In combination with the PROFITEST 0100S-II, the DC-II allows for:
Testing of the DC branch for AC/DC sensitive RCCBs - measurement of tripping current and time to trip for 30 and 300 mA RCCBs
Can also be used for measurement of loop impedance within the system without tripping the RCCB
Testing of the DC branch for AC/DC sensitive RCCBs - measurement of tripping current and time to trip for 30 and 300 mA RCCBs
Can also be used for measurement of loop impedance within the system without tripping the RCCB
RCD tester - 10 - 500 mA | METRALINE RCD-CHECK
Measuring instrument which checks the qualities of a FI switch.
It is all about the measuring of the contact voltage in particular, determing time and tripping current of RCD types A, AC, S...
It is all about the measuring of the contact voltage in particular, determing time and tripping current of RCD types A, AC, S...
RCD tester - 10 - 500 mA | METRALINE RCD-CHECK
Measuring instrument which checks the qualities of a FI switch.
It is all about the measuring of the contact voltage in particular, determing time and tripping current of RCD types A, AC, S and F.
Features
Digital display, backlit color OLED display
LED for measurement point illumination
Patented means of securing the test probes
Compact and rugged for service calls and laboratory use
Testing features
Testing of residual current devices (RCDs)
Measurement of touch voltage without tripping the RCCB.
Contact voltage is measured with reference to nominal residual current using 1/3 of the nominal residual current value.
Tripping test with nom. residual current, time to trip measurement
It is all about the measuring of the contact voltage in particular, determing time and tripping current of RCD types A, AC, S and F.
Features
Digital display, backlit color OLED display
LED for measurement point illumination
Patented means of securing the test probes
Compact and rugged for service calls and laboratory use
Testing features
Testing of residual current devices (RCDs)
Measurement of touch voltage without tripping the RCCB.
Contact voltage is measured with reference to nominal residual current using 1/3 of the nominal residual current value.
Tripping test with nom. residual current, time to trip measurement
Circuit breaker tester - TM1800
Modular based design user configurable TM1800 from nine different modules
Built in PC with CABA Local software advanced testing with predefined breaker test plans (templates), onsite measurement view and analysis
Dual ground testing using DCM...
Built in PC with CABA Local software advanced testing with predefined breaker test plans (templates), onsite measurement view and analysis
Dual ground testing using DCM...
Circuit breaker tester - TM1800
Modular based design user configurable TM1800 from nine different modules
Built in PC with CABA Local software advanced testing with predefined breaker test plans (templates), onsite measurement view and analysis
Dual ground testing using DCM module increased safety with both sides of breaker grounded
Fast and easy testing Select-Connect-Inspect workflow and high level user interface
Graphical results for quick interpretation timing and motion measurements, coil currents
USB and Ethernet communication interface for quick back up, LAN connection and printer options
CABA Win for advanced data analysis, database interface and common test data archive
The TM1800 is the instrument platform for circuit breaker maintenance, based on more than 20 years experience of over 4,000 delivered breaker analyzers. The modular construction makes it possible to configure the TM1800
for measurements on all known types of circuit breakers in operation in todays power world.
Built in PC with CABA Local software advanced testing with predefined breaker test plans (templates), onsite measurement view and analysis
Dual ground testing using DCM module increased safety with both sides of breaker grounded
Fast and easy testing Select-Connect-Inspect workflow and high level user interface
Graphical results for quick interpretation timing and motion measurements, coil currents
USB and Ethernet communication interface for quick back up, LAN connection and printer options
CABA Win for advanced data analysis, database interface and common test data archive
The TM1800 is the instrument platform for circuit breaker maintenance, based on more than 20 years experience of over 4,000 delivered breaker analyzers. The modular construction makes it possible to configure the TM1800
for measurements on all known types of circuit breakers in operation in todays power world.
Circuit breaker tester - TM1700 series
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All models can be controlled...
Circuit breaker tester - TM1700 series
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All models can be controlled from a computer using the well proven data management and analysing software CABA Win.
The robust design offers powerful technology that assists the user to achieve efficient and reliable circuit breaker testing. All inputs and outputs on the instrument are designed to withstand the challenging environment in high-voltage substations and industrial environments. Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections.
The patented DualGround™ method makes the testing safe and
time saving by keeping the circuit breaker grounded on both sides throughout the test.
The robust design offers powerful technology that assists the user to achieve efficient and reliable circuit breaker testing. All inputs and outputs on the instrument are designed to withstand the challenging environment in high-voltage substations and industrial environments. Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections.
The patented DualGround™ method makes the testing safe and
time saving by keeping the circuit breaker grounded on both sides throughout the test.
Circuit breaker tester - MS-2A
Light Weight, Portable Primary Injection Test Instrument
Overcurrent Relay Testing
Ground Fault Performance Testing for NEC 230.95
Circuit Breaker Testing
A...
Overcurrent Relay Testing
Ground Fault Performance Testing for NEC 230.95
Circuit Breaker Testing
A...
Circuit breaker tester - MS-2A
Light Weight, Portable Primary Injection Test Instrument
Overcurrent Relay Testing
Ground Fault Performance Testing for NEC 230.95
Circuit Breaker Testing
A variable DC voltage is needed to test a circuit breaker. Substation batteries should not be used since this entails considerable risk for testing personnel, testing equipment and also for the equipment being tested. The best way to ascertain whether or not solenoids and protective mechanisms are sluggish or set improperly is to perform a test at minimum tripping voltage. The minimum trip voltage test is described in a number of international and national standards such as IEC 62271-100, ANSI C37.09 etc.
Overcurrent Relay Testing
Ground Fault Performance Testing for NEC 230.95
Circuit Breaker Testing
A variable DC voltage is needed to test a circuit breaker. Substation batteries should not be used since this entails considerable risk for testing personnel, testing equipment and also for the equipment being tested. The best way to ascertain whether or not solenoids and protective mechanisms are sluggish or set improperly is to perform a test at minimum tripping voltage. The minimum trip voltage test is described in a number of international and national standards such as IEC 62271-100, ANSI C37.09 etc.
Test system - 60 A, 300 VA | SMRT36
Small, rugged, lightweight and powerful
Operate with or without a computer
Intuitive manual operation with Smart Touch View Interface
High current, high power (60 Amps/300 VA rms) per phase
Network interface provides IEC 61850 test capabilities
Fully automated testing...
Operate with or without a computer
Intuitive manual operation with Smart Touch View Interface
High current, high power (60 Amps/300 VA rms) per phase
Network interface provides IEC 61850 test capabilities
Fully automated testing...
Test system - 60 A, 300 VA | SMRT36
Small, rugged, lightweight and powerful
Operate with or without a computer
Intuitive manual operation with Smart Touch View Interface
High current, high power (60 Amps/300 VA rms) per phase
Network interface provides IEC 61850 test capabilities
Fully automated testing using AVTS Software
For size, weight, and features the SMRT36 is conceivably the smallest, lightest, highest output powered, complete three phase relay test system in the world today. The test system may be customized by adding the number of Voltage-Current, VIGEN, modules needed for specific test applications. For electric utility use, the SMRT36 with three VIGEN Modules provides complete three-phase testing of three-phase impedance, directional power, negative sequence overcurrent and other devices that require a three-phase four-wire wye connected source.
With three modules, output current and VA is tripled for high instantaneous or high burden overcurrent relays. With the voltage channels converted to currents, the same unit can provide 6-phase current. The SMRT36 VIGEN modules also provide high power in BOTH the voltage and current channels to test virtually all relays.
Operate with or without a computer
Intuitive manual operation with Smart Touch View Interface
High current, high power (60 Amps/300 VA rms) per phase
Network interface provides IEC 61850 test capabilities
Fully automated testing using AVTS Software
For size, weight, and features the SMRT36 is conceivably the smallest, lightest, highest output powered, complete three phase relay test system in the world today. The test system may be customized by adding the number of Voltage-Current, VIGEN, modules needed for specific test applications. For electric utility use, the SMRT36 with three VIGEN Modules provides complete three-phase testing of three-phase impedance, directional power, negative sequence overcurrent and other devices that require a three-phase four-wire wye connected source.
With three modules, output current and VA is tripled for high instantaneous or high burden overcurrent relays. With the voltage channels converted to currents, the same unit can provide 6-phase current. The SMRT36 VIGEN modules also provide high power in BOTH the voltage and current channels to test virtually all relays.
Relay tester - FREJA306
For secondary testing of protection relays
Can be used stand-alone or with a PC
Flexble, can test many relay types
...
Can be used stand-alone or with a PC
Flexble, can test many relay types
...
Relay tester - FREJA306
For secondary testing of protection relays
Can be used stand-alone or with a PC
Flexble, can test many relay types
Lightweight and portable
Greatest possible precision
FREJA 306 can be operated with or without a PC. After being put into the Local mode, FREJA 306 can be used stand-alone without a PC. FREJA 306 is an excellent choice when you want more current outputs, higher amps, VA or compliance voltage. Use it to test differential relays with 6 currents, or virtually any single or 3-phase relay.
Can be used stand-alone or with a PC
Flexble, can test many relay types
Lightweight and portable
Greatest possible precision
FREJA 306 can be operated with or without a PC. After being put into the Local mode, FREJA 306 can be used stand-alone without a PC. FREJA 306 is an excellent choice when you want more current outputs, higher amps, VA or compliance voltage. Use it to test differential relays with 6 currents, or virtually any single or 3-phase relay.