+7 (812) 645-08-06
Air springs
select brand
Air spring - 12.2030.0101
Material cuneiform body:cast iron, gray lacquered
Coating:Top and bottom side with slide protection profile; stable vibration...
Air spring - 12.2030.0101
Material cuneiform body:cast iron, gray lacquered
Coating:Top and bottom side with slide protection profile; stable vibration...
Air spring - 12.2030.0501
Material cuneiform body:cast iron, gray lacquered
Coating top:SLP: with slide protection profile; stable vibration damping material that meets the static and dynamic stability requirements;...
Air spring - 12.2030.0501
Material cuneiform body:cast iron, gray lacquered
Coating top:SLP: with slide protection profile; stable vibration damping material that meets the static and dynamic stability requirements;...
Air spring - 12.2108.0701
Outer diameter : 73 mm
The Phoenix stabilizer has a CR part with a reinforced nylon cord. The black material is steel-galvanized and has a yellow-chromated setup. It may be used in conditions from -40 to 70 degrees Celsius. It is a single-acting spring that uses some lifting...
The Phoenix stabilizer has a CR part with a reinforced nylon cord. The black material is steel-galvanized and has a yellow-chromated setup. It may be used in conditions from -40 to 70 degrees Celsius. It is a single-acting spring that uses some lifting...
Air spring - 12.2108.0701
The Phoenix stabilizer has a CR part with a reinforced nylon cord. The black material is steel-galvanized and has a yellow-chromated setup. It may be used in conditions from -40 to 70 degrees Celsius. It is a single-acting spring that uses some lifting elements. The reset will occur when the dead weight of the object is lifted.
The stabilizer has a lower installation height and is very stable. The singlefold bellows are paired with a flanged base plate. The walls are made with elastomer layers where two layers of nylon cords are embedded for reinforcement needs.
It may be a insulator that dampens more oscillations and can insulate noises and thrusts as well. The plate has soldered metal with top hat nuts for mounting needs. Connections for the exhaust and intake setups are included. The flexible wall operates without any friction and allows the base plate to be slanted to up to 30% at a time. The two varying side lengths can be smaller than the height of the bellows.
The stabilizer has a lower installation height and is very stable. The singlefold bellows are paired with a flanged base plate. The walls are made with elastomer layers where two layers of nylon cords are embedded for reinforcement needs.
It may be a insulator that dampens more oscillations and can insulate noises and thrusts as well. The plate has soldered metal with top hat nuts for mounting needs. Connections for the exhaust and intake setups are included. The flexible wall operates without any friction and allows the base plate to be slanted to up to 30% at a time. The two varying side lengths can be smaller than the height of the bellows.
Air spring - 12.2108.0901
The dual shaft stabilizer Phoenix of APSOparts comes with the elastomer part made out of the CR, in black color and reinforced with the nylon cord. The base plate material is yellow chromated galvanized steel.
It is suitable for use on the work...
It is suitable for use on the work...
Air spring - 12.2108.0901
The dual shaft stabilizer Phoenix of APSOparts comes with the elastomer part made out of the CR, in black color and reinforced with the nylon cord. The base plate material is yellow chromated galvanized steel.
It is suitable for use on the work temperatures between -40 and +70 degrees Celsius.
These stabilizers have the low installation height and great lateral stability. They have two folds between the flanged base plates and the bellow walls are made out of top quality layers of elastomer. Two layers of nylon cords are inside the elastomer and they have the reinforcing function.
These bellows are applied for lowering and lifting heavy loads with large strokes. The base plates have the soldered-in-top nuts which are used for mounting and the connection for exhaust and air intake.
The bellows operate without friction and they allow slanting of the base plate up to 30%. The two varying side lengths mustn't exceed the maximum and minimum height of the bellows.
It is suitable for use on the work temperatures between -40 and +70 degrees Celsius.
These stabilizers have the low installation height and great lateral stability. They have two folds between the flanged base plates and the bellow walls are made out of top quality layers of elastomer. Two layers of nylon cords are inside the elastomer and they have the reinforcing function.
These bellows are applied for lowering and lifting heavy loads with large strokes. The base plates have the soldered-in-top nuts which are used for mounting and the connection for exhaust and air intake.
The bellows operate without friction and they allow slanting of the base plate up to 30%. The two varying side lengths mustn't exceed the maximum and minimum height of the bellows.
Air spring / truck / trailer
Firestone Industrial Products is the leader in air spring technology. Our technical resources and experienced sale engineers have the skills required to respond to your air suspension requirements.
Air spring / bus
Firestone Industrial Products is the leader in air spring technology. Our technical resources and experienced sale engineers have the skills required to respond to your air suspension requirements.
Air spring
The ITT Enidine Air Springs and Air Shock Absorbers are available in two types of materials: fabric-reinforced Wingprene™ or fabric-reinforced rubber, with maximum operating temperatures...
Air spring
The ITT Enidine Air Springs and Air Shock Absorbers are available in two types of materials: fabric-reinforced Wingprene™ or fabric-reinforced rubber, with maximum operating temperatures...