+7 (812) 645-08-06
Collet chucks
select brand
Clamp chuck / power / 3-jaw / machines - 3 - 6.3 mm | ROTA NCX
Attractively-priced fast production
Following the earlier successes of the SCHUNK wedge bar power chucks, SCHUNK has now applied the principle of the quick jaw change to CNC machines with a short-stroke cylinder. The ROTA NCX distinguishes itself as an attractive addition for faster production, in particular for the optimization of production processes,...
Following the earlier successes of the SCHUNK wedge bar power chucks, SCHUNK has now applied the principle of the quick jaw change to CNC machines with a short-stroke cylinder. The ROTA NCX distinguishes itself as an attractive addition for faster production, in particular for the optimization of production processes,...
Clamp chuck / power / 3-jaw / machines - 3 - 6.3 mm | ROTA NCX
Attractively-priced fast production
Following the earlier successes of the SCHUNK wedge bar power chucks, SCHUNK has now applied the principle of the quick jaw change to CNC machines with a short-stroke cylinder. The ROTA NCX distinguishes itself as an attractive addition for faster production, in particular for the optimization of production processes, due to the outstanding price-performance ratio. It minimizes set-up time and extends the main productive times of the machine. With the jaw quick-change system, the chuck jaws do not have to be turned out again.
Convenient jaw quick-change system
In order to increase operational safety, it is equipped with a jaw presence monitor. The disengaging key of the chuck can only be pulled out when the base jaw is properly engaged in the wedge bar. All SCHUNK standard top jaws with tongue and groove design are suitable as top jaws. It can be used for both O.D. and I.D. clamping.
Product features
Convenient jaw quick-change system
Large chuck bore
High efficiency of the wedge bar system
High jaw quick change repeat precision
Optimized lubrication system
Modular protection sleeve system
Integrated jaw securing
Removable and extendible blank draw nut integrated in the chuck
Low chuck weight
Functional parts hardened and ground on all sides
Easy to handle
Wide-ranging standard clamping jaw program available
Following the earlier successes of the SCHUNK wedge bar power chucks, SCHUNK has now applied the principle of the quick jaw change to CNC machines with a short-stroke cylinder. The ROTA NCX distinguishes itself as an attractive addition for faster production, in particular for the optimization of production processes, due to the outstanding price-performance ratio. It minimizes set-up time and extends the main productive times of the machine. With the jaw quick-change system, the chuck jaws do not have to be turned out again.
Convenient jaw quick-change system
In order to increase operational safety, it is equipped with a jaw presence monitor. The disengaging key of the chuck can only be pulled out when the base jaw is properly engaged in the wedge bar. All SCHUNK standard top jaws with tongue and groove design are suitable as top jaws. It can be used for both O.D. and I.D. clamping.
Product features
Convenient jaw quick-change system
Large chuck bore
High efficiency of the wedge bar system
High jaw quick change repeat precision
Optimized lubrication system
Modular protection sleeve system
Integrated jaw securing
Removable and extendible blank draw nut integrated in the chuck
Low chuck weight
Functional parts hardened and ground on all sides
Easy to handle
Wide-ranging standard clamping jaw program available
Clamp chuck / machining / 3-jaw - 7 - 25.4 mm | ROTA TB2
Extremely large through-hole
SCHUNK’s pneumatically actuated ROTA TB2 front-end chuck sets a new standard in machining of bars and pipes for the oil industry as well as the mining and construction sectors. Despite the compact outer dimensions, the ROTA TB2 has an extremely large through-hole of up to 560 mm. With air pressure of 6 bar it is already possible to achieve very high clamping...
SCHUNK’s pneumatically actuated ROTA TB2 front-end chuck sets a new standard in machining of bars and pipes for the oil industry as well as the mining and construction sectors. Despite the compact outer dimensions, the ROTA TB2 has an extremely large through-hole of up to 560 mm. With air pressure of 6 bar it is already possible to achieve very high clamping...
Clamp chuck / machining / 3-jaw - 7 - 25.4 mm | ROTA TB2
Extremely large through-hole
SCHUNK’s pneumatically actuated ROTA TB2 front-end chuck sets a new standard in machining of bars and pipes for the oil industry as well as the mining and construction sectors. Despite the compact outer dimensions, the ROTA TB2 has an extremely large through-hole of up to 560 mm. With air pressure of 6 bar it is already possible to achieve very high clamping forces of up to 280 kN, which can easily be adapted to the particular task. An anti-corrosive coating applied to the most important functional components of the SCHUNK ROTA TB2 significantly increases the service life. The base jaw guidances are equipped with a special seal to prevent penetration of contamination, dust and swarf, therefore reducing maintenance costs. In addition, an advanced lubrication system ensures constant clamping forces and particularly high process stability.
Faster clamping processes
To increase the processing rate in the machining of pipes and rods, the ROTA TB2 features a double acting check valve with extra large channel bores, which speeds up the clamping process considerably. After completion of machining an innovative sound-absorbing quick action ventilation system allows fast and low-noise release of the clamping setup. To operate the ROTA TB2, it only has to be connected to the existing compressed air supply. The integrated distributor ring eliminates the need for an additional rotary feed-through. An optional pressure sensor provides for maximum process reliability and operational safety in daily use.
SCHUNK’s pneumatically actuated ROTA TB2 front-end chuck sets a new standard in machining of bars and pipes for the oil industry as well as the mining and construction sectors. Despite the compact outer dimensions, the ROTA TB2 has an extremely large through-hole of up to 560 mm. With air pressure of 6 bar it is already possible to achieve very high clamping forces of up to 280 kN, which can easily be adapted to the particular task. An anti-corrosive coating applied to the most important functional components of the SCHUNK ROTA TB2 significantly increases the service life. The base jaw guidances are equipped with a special seal to prevent penetration of contamination, dust and swarf, therefore reducing maintenance costs. In addition, an advanced lubrication system ensures constant clamping forces and particularly high process stability.
Faster clamping processes
To increase the processing rate in the machining of pipes and rods, the ROTA TB2 features a double acting check valve with extra large channel bores, which speeds up the clamping process considerably. After completion of machining an innovative sound-absorbing quick action ventilation system allows fast and low-noise release of the clamping setup. To operate the ROTA TB2, it only has to be connected to the existing compressed air supply. The integrated distributor ring eliminates the need for an additional rotary feed-through. An optional pressure sensor provides for maximum process reliability and operational safety in daily use.
Clamp chuck / quick-change - 1.6 - 42 mm, max. 7 100 rpm | QCRL 42(I)
The QCRL42 is a long series power collet chuck manufactured by Kitagawa...
Clamp chuck / quick-change - 1.6 - 42 mm, max. 7 100 rpm | QCRL 42(I)
The QCRL42 is a long series power collet chuck manufactured by Kitagawa Europe. It features a gripping range of 1.6 mm to 42 mm with a collet increment of 3 mm. It also has a maximum input force of 25kN and a maximum gripping force of 55kN. The sleeve stroke is 7 mm.
Clamp chuck / quick-change - 1.6 - 54 mm, max. 6 300 rpm | QCRL 54
The QCRL 54 Quick Change Collet Chuck has a gripping range of 1.6 to 54 mm and...
Clamp chuck / quick-change - 1.6 - 54 mm, max. 6 300 rpm | QCRL 54
The QCRL 54 Quick Change Collet Chuck has a gripping range of 1.6 to 54 mm and a maximum rotation speed of 6,300 mm. This chuck is permanently attached and is available in various mount types. It also has a maximum input force of 30 kN and a maximum gripping force of 60 kN. Moreover, its collet advances up to 3 mm.
Clamp chuck / quick-change - 4 - 60 mm | QCRL 60
The QCRL 60 is a Quick Change Collet chuck manufactured by Kitagawa Europe. Specially...
Clamp chuck / quick-change - 4 - 60 mm | QCRL 60
The QCRL 60 is a Quick Change Collet chuck manufactured by Kitagawa Europe. Specially suitable for D677 Varibore Collets and D185E Spring Collets, it has a gripping range of 4 mm to 60 mm with a collet increment of 4mm. In addition, it features a maximum input force of 30 kN and a maximum gripping force of 60kN.
Clamp chuck / quick-change - 3 - 66 mm | QCRS 66
Kitagawa's QCRL 54 (Quick-Change Collet Chuck (QCRL)/QCRL Collet Chuck) features a...
Clamp chuck / quick-change - 3 - 66 mm | QCRS 66
Kitagawa's QCRL 54 (Quick-Change Collet Chuck (QCRL)/QCRL Collet Chuck) features a gripping range of 3 to 66 millimeters, a collet increment value of 3 millimeters, and a sleeve stroke measurement of 10 millimeters. Its total input and gripping force measure 38 kN and 84 kN, respectively, while its weight scales at 29 kilograms.
Clamp chuck / quick-change - 12 - 80 mm, max. 4 500 rpm | QCRS 80
The QCRS 80 series of collet chucks from KITAGAWA can handle gripping operations with...
Clamp chuck / quick-change - 12 - 80 mm, max. 4 500 rpm | QCRS 80
The QCRS 80 series of collet chucks from KITAGAWA can handle gripping operations with materials that have thicknesses ranging from 12 - 80mm. The unit is designed with a 3 mm collet increment, and an 11 mm sleeve stroke. Moreover, this product is engineered to handle up to 45 kilonewtons of input forces, and 78 kilonewtons of gripping forces.
Clamp chuck - CTS
The CTS series is ideally integrated in systems like machine tables, dividers, and...
Clamp chuck - CTS
The CTS series is ideally integrated in systems like machine tables, dividers, and spindles. This product may be used with other Erowa tooling systems. It is also fitted with work piece holders that do not come with a collet functionality. Moreover, it comes with blank collets that are used for specific applications.