+7 (812) 645-08-06
Mechanical presses
select brand
Forming press / mechanical
Parts of car or truck body are produced on large mechanical presses.
The first press of this line is a machine for deep drawing operations.
Its drive can be eccentric (ram...
The first press of this line is a machine for deep drawing operations.
Its drive can be eccentric (ram...
Forming press / mechanical
Parts of car or truck body are produced on large mechanical presses.
The first press of this line is a machine for deep drawing operations.
Its drive can be eccentric (ram motion according to traditional sinus curve) or link-drive.
In this last case the slowing during the last descent part makes the machine particularly able to perform heavy drawing operations, reducing shocks, minimizing stamping tears and tool overheating.
Extra strong blank holder cushion equipped with accessories for different drawing uses.
Generally the automation consists of:
destacker for blank loading
robots for stamping transport from a press to the next
Press PLC
Line supervisor
The first press of this line is a machine for deep drawing operations.
Its drive can be eccentric (ram motion according to traditional sinus curve) or link-drive.
In this last case the slowing during the last descent part makes the machine particularly able to perform heavy drawing operations, reducing shocks, minimizing stamping tears and tool overheating.
Extra strong blank holder cushion equipped with accessories for different drawing uses.
Generally the automation consists of:
destacker for blank loading
robots for stamping transport from a press to the next
Press PLC
Line supervisor
Transfer press / mechanical
A technologically complex production can easily be executed on dedicated stamping centers.
The core of this kind of equipment is represented by a mechanical press, normally in a version which is a specific one for the required...
The core of this kind of equipment is represented by a mechanical press, normally in a version which is a specific one for the required...
Transfer press / mechanical
A technologically complex production can easily be executed on dedicated stamping centers.
The core of this kind of equipment is represented by a mechanical press, normally in a version which is a specific one for the required production.
Any drive type is available in the versions: eccentric, knuckle joint, link-drive; one, two, four connecting rods or in more complex combinations with one or more rams.
The Colombo Agostino engineering service will study and offer the most rational solutions for the automation and reduction of dead times.
Fairly balanced solutions of coil lines, transfers, robots allow to optimize any solutions to stamping problems.
Generally, despite the high specificity of this kind of equipment, it is possible to get a good flexibility level so that productions different than the original ones can be easily achieved on the same line.
The core of this kind of equipment is represented by a mechanical press, normally in a version which is a specific one for the required production.
Any drive type is available in the versions: eccentric, knuckle joint, link-drive; one, two, four connecting rods or in more complex combinations with one or more rams.
The Colombo Agostino engineering service will study and offer the most rational solutions for the automation and reduction of dead times.
Fairly balanced solutions of coil lines, transfers, robots allow to optimize any solutions to stamping problems.
Generally, despite the high specificity of this kind of equipment, it is possible to get a good flexibility level so that productions different than the original ones can be easily achieved on the same line.
Mechanical press / eccentric
Mechanical presses with eccentric drive offer a motion slide diagram quite close to a sinus...
Mechanical press / eccentric
Mechanical presses with eccentric drive offer a motion slide diagram quite close to a sinus curve.
Stroke can reach 1000 mm or more; nominal press capacities can be available even 80 or 100 mm over bottom dead center.
This drive is the most traditional one and since years it remains the right answer to a wide range of stamping operations
Stroke can reach 1000 mm or more; nominal press capacities can be available even 80 or 100 mm over bottom dead center.
This drive is the most traditional one and since years it remains the right answer to a wide range of stamping operations
Mechanical press / toggle
This type of presses brings to a ram motion extremely slow in the area of bottom dead centre, both before and after getting it.
Typical...
Typical...
Mechanical press / toggle
This type of presses brings to a ram motion extremely slow in the area of bottom dead centre, both before and after getting it.
Typical deformations definitely executed on a knuckle joint press are:
coining
flattening
embossing
As a matter of fact in all these operations the material must be free to plastically flow into the die.
Moreover Colombo Agostino offers custom optimised motion diagrams in compliance with the deformation to perform and with the stamping material.
Typical deformations definitely executed on a knuckle joint press are:
coining
flattening
embossing
As a matter of fact in all these operations the material must be free to plastically flow into the die.
Moreover Colombo Agostino offers custom optimised motion diagrams in compliance with the deformation to perform and with the stamping material.
Mechanical press / hinged type connecting rod / hinged type connecting rod
This drive slows down the ram during the lower part of its descent stroke.
This characteristic results in a considerable impact...
This characteristic results in a considerable impact...
Mechanical press / hinged type connecting rod / hinged type connecting rod
This drive slows down the ram during the lower part of its descent stroke.
This characteristic results in a considerable impact speed even quite far over bottom dead center so allowing to maintain high output speeds.
The particular Colombo Agostino link - drive version insures a longer die life and product quality improvement.
Also with this drive it is possible to design the press with extremely long stroke values and press capacities supplied quite many millimetres far over bottom dead centre.
This characteristic results in a considerable impact speed even quite far over bottom dead center so allowing to maintain high output speeds.
The particular Colombo Agostino link - drive version insures a longer die life and product quality improvement.
Also with this drive it is possible to design the press with extremely long stroke values and press capacities supplied quite many millimetres far over bottom dead centre.
Automatic press line / with transfer system
The press line is manufactured by Lauffer, and is fitted with blank loaders, coil lines...
Automatic press line / with transfer system
The press line is manufactured by Lauffer, and is fitted with blank loaders, coil lines in short and long construction. It has an operating material including transfers, feeder or robotic, which can generate an automatic press system out of a single press. It is manufactured man-less by linking various presses and automation elements.
High-speed blanking press / mechanical
A new concept was developed in the niche of transporting shaped blanks like hoofs, roofs, units of double boors, body sides via tandem lines. The work that is collaborative and happened between kuka systems and Fagor Arrasate...
High-speed blanking press / mechanical
A new concept was developed in the niche of transporting shaped blanks like hoofs, roofs, units of double boors, body sides via tandem lines. The work that is collaborative and happened between kuka systems and Fagor Arrasate has led to the development of this new system with better performance. It operates with robots that have higher versatility and ratings of output higher than conventional systems. There is a working mode which is newly available with this which helps presses to run in the continuous mode. This system can reduce occupied space, maintenance and also can make robots to follow motion related with presses even when there is fluctuation in the line speeds. It can simplify the whole process of automation and can allow line for adapting itself to the requirements of dies and optimizing the process of installation in a versatile and quick manner.
Cutting press / mechanical
These Press Blanking Lines of SPT or Servo Press Technology are designed to cut blanks adjusted to the final shape that requires cuts with a particular die. These products were made by Fargo...
Cutting press / mechanical
These Press Blanking Lines of SPT or Servo Press Technology are designed to cut blanks adjusted to the final shape that requires cuts with a particular die. These products were made by Fargo Arasate which provide a complete installations to attain the need of the operator. These conventional mechanical presses require automation with a high quality, high production and ergonomics which are operated by a central computer enabling the whole system to get ready without the human effort from the control panel with lesser cost of time.
It offers solutions for various types of sheet metal characteristics and surfaces which build up car structure when put together as it includes zinc coatings, high-strength steel and various thickness.
It offers solutions for various types of sheet metal characteristics and surfaces which build up car structure when put together as it includes zinc coatings, high-strength steel and various thickness.