+7 (812) 645-08-06
Forming press / hydraulic / for wood - PRESS
Wood forming technology (for plywood, MDF boards, floor panels, etc.) with the use of ZEMAT brand Radio Frequency (RF) Generators and custom designed Hydraulic Presses is the best and the most economical solution for manufacturers making short series of products and requiring energy efficient, fast and easy production process.Thanks to the use of RF technology the cost of tooling (moulds) is several times lower than with the use of traditional methods of wood forming. The raw material is places inside the mounted on the press table mould and after closing the high hydraulic pressure is applied. Then the RF frequency is turned on to start the heating process. The RF heating can be roughly compared to that of a microwave oven. Another words the heating take place inside of the molded material not on the surface of the mould. This technology is extremely energy efficient and fast. The average time for forming/gluing process is between 2-20 minutes relative to the thickness and surface of the raw material.
FEATURES:
Programmable press time
Automatic opening the press after expiration of definite time
Safety cut out switch - barrier around the press
Hydraulic system
Press force smooth regulated by pressure switch at 15 100%
Pump efficiency: 60 dm3/min and pressure 2,5 MPa, closing speed of 25 mm/s
Pump efficiency 6 dm3/min and pressure 30 MPa gives work pressure up to 25 MPa
Surface pressure around 5,5 - 6,5 kG/cms (on 100% of table surface)
CE rated, EC declaration of conformity