+7 (812) 645-08-06
Pneumatic conveying: pumps, valves, piping...
select brand
Selector valve / diverter / 3-way - HTV-3
3-Way Selector/Diverter Valve, ENP Steel Toggle
Additional...
Additional...
Selector valve / diverter / 3-way - HTV-3
3-Way Selector/Diverter Valve, ENP Steel Toggle
Additional Information
Inlet / Outlet #10-32 / #10-32
Special Options Standard
Toggle material Electro Nickel Plated
Toggle valve details 3W,Selector,thd. pt,Cil. shape
Additional Information
Inlet / Outlet #10-32 / #10-32
Special Options Standard
Toggle material Electro Nickel Plated
Toggle valve details 3W,Selector,thd. pt,Cil. shape
Venturi ejector / anodized aluminium - ø 0.5 - 3 mm, 7 - 370 l/min, 4.5 - 5 bar | VEB series
The Camozzi's VEB series of basic ejector is available in two versions, the "L" model...
Venturi ejector / anodized aluminium - ø 0.5 - 3 mm, 7 - 370 l/min, 4.5 - 5 bar | VEB series
The Camozzi's VEB series of basic ejector is available in two versions, the "L" model and the "H" model. The "L" type of ejector is basically for working with porous workpieces, the "H" type, on the other hand, is for operating with extensive vacuum value. Both have no moving parts and operate using the Venturi concept.
Venturi ejector / technopolymer - ø 0.5 - 2.5 mm, 8 - 207 l/min | VEBL series
The Venturi VEBL series is a regular ejector engineered by Camozzi. Its...
Venturi ejector / technopolymer - ø 0.5 - 2.5 mm, 8 - 207 l/min | VEBL series
The Venturi VEBL series is a regular ejector engineered by Camozzi. Its housing material is made of technopolymer. This series has stationary sections and is based on the Venturi standards. It is available in a variety of sizes with 0.5 to 2.5 mm inside nozzle and 8 to 207 suction levels.
Venturi ejector / anodized aluminium / online - ø 0.7 - 0.9 mm, 14 - 21 l/min, 5 bar | VED series
Vacuum compact ejectors with no...
Venturi ejector / anodized aluminium / online - ø 0.7 - 0.9 mm, 14 - 21 l/min, 5 bar | VED series
Vacuum compact ejectors with no moving parts based on Venturi principle are suitable for direct installation on suction pads.
Venturi ejector / compact / technopolymer / online - ø 0.5 - 0.7 mm, 8 - 16 l/min, 3 - 6 bar | VEDL series
Vacuum compact ejectors in techno-polymer with no moving parts based on Venturi principle...
Venturi ejector / compact / technopolymer / online - ø 0.5 - 0.7 mm, 8 - 16 l/min, 3 - 6 bar | VEDL series
Vacuum compact ejectors in techno-polymer with no moving parts based on Venturi principle are suitable for direct installation on suction pads.
These are made up of techno-polymer body with internal nozzle in brass.
These are available in 0,5 and 0,7mm sizes
Suction rates- from 8 to 16l/min.
These are made up of techno-polymer body with internal nozzle in brass.
These are available in 0,5 and 0,7mm sizes
Suction rates- from 8 to 16l/min.
Air hydro-ejector / stainless steel - RainJets
The RainJet is a hydroejector designed to automatically clean tanks used for the temporary storage of stormwater or wastewater so that odour problems are avoided and storage capacity is maintained.
The RainJet continues flushing until the tank is completely empty and all the contents have been pumped into the sewer system. It uses...
The RainJet continues flushing until the tank is completely empty and all the contents have been pumped into the sewer system. It uses...
Air hydro-ejector / stainless steel - RainJets
The RainJet is a hydroejector designed to automatically clean tanks used for the temporary storage of stormwater or wastewater so that odour problems are avoided and storage capacity is maintained.
The RainJet continues flushing until the tank is completely empty and all the contents have been pumped into the sewer system. It uses the water already in the tank and hence does not need an external source of fresh water.
The RainJet is made either as a water/water (WW) or water/air (WA) ejector:
RainJet WW with greater flow for cleaning wider tanks
RainJet WA with jet that reaches further and is mixed with air.
The RainJet is made entirely of stainless steel of AISI 304/DIN1.4301 or AISI 316/DIN 1.4401, and is coupled to a wastewater pump of the SE or S type.
Applications
No matter what the size and layout, a customised solution of one or more RainJets can easily be designed to clean detention, equalisation or stormwater tanks used for the storage of excess water in order to minimise the risks of:
Flooding or pollution of receiving waters if capacity of the sewer system is exceeded
Damage of biological processes at the WWTP if untreated industrial process water arrives
Disruption of purification processes at the WWTP due to hydraulic overload.
The RainJet continues flushing until the tank is completely empty and all the contents have been pumped into the sewer system. It uses the water already in the tank and hence does not need an external source of fresh water.
The RainJet is made either as a water/water (WW) or water/air (WA) ejector:
RainJet WW with greater flow for cleaning wider tanks
RainJet WA with jet that reaches further and is mixed with air.
The RainJet is made entirely of stainless steel of AISI 304/DIN1.4301 or AISI 316/DIN 1.4401, and is coupled to a wastewater pump of the SE or S type.
Applications
No matter what the size and layout, a customised solution of one or more RainJets can easily be designed to clean detention, equalisation or stormwater tanks used for the storage of excess water in order to minimise the risks of:
Flooding or pollution of receiving waters if capacity of the sewer system is exceeded
Damage of biological processes at the WWTP if untreated industrial process water arrives
Disruption of purification processes at the WWTP due to hydraulic overload.