+7 (812) 645-08-06
Welding carriages
select brand
Submerged arc welding carriage / beam traveling - 0.06 - 2 m/min | A2/A6
The A2/A6 Beam-travelling carriage is made for gas metal arc welding and...
Submerged arc welding carriage / beam traveling - 0.06 - 2 m/min | A2/A6
The A2/A6 Beam-travelling carriage is made for gas metal arc welding and for submerged arc welding. It is built with a metal casted chassis to ensure durability and designed to be mounted on a beam for mobility. It could accommodate standard A6S welding heads as well as A2S welding heads.
Automatic welding carriage - 9 m/min | A2 Multitrac
A2 Multitrac using A2/A6 process controller PEK can be obtained with regard to both SAW and also the GMAW process. If the SAW-version is actually preferred, the particular A2 Multitrac...
Automatic welding carriage - 9 m/min | A2 Multitrac
A2 Multitrac using A2/A6 process controller PEK can be obtained with regard to both SAW and also the GMAW process. If the SAW-version is actually preferred, the particular A2 Multitrac has been actually effective at operating equally well using often individual or twin cord.
The feed unit obtains an even as well as dependable wire-feed speed. Exact journey speed is actually made sure through four-wheel generate. Precise presenting as well as a command of the welding parameters is done around the device equipped with digital display
This Multitrac is completely movable and can effortlessly end up being transferred from one of welding section to another. It can be assembled quickly for diverse workplaces.
The feed unit obtains an even as well as dependable wire-feed speed. Exact journey speed is actually made sure through four-wheel generate. Precise presenting as well as a command of the welding parameters is done around the device equipped with digital display
This Multitrac is completely movable and can effortlessly end up being transferred from one of welding section to another. It can be assembled quickly for diverse workplaces.
Automatic welding carriage - 0.2 - 4 m/min | A6 Mastertrac A6TF
The A6 Mastertrac is a vigorous dimensioned, self-impelled, four-wheel drive, programmed welding machine. The progressed electronic control...
Automatic welding carriage - 0.2 - 4 m/min | A6 Mastertrac A6TF
The A6 Mastertrac is a vigorous dimensioned, self-impelled, four-wheel drive, programmed welding machine. The progressed electronic control gear gives high exactness and the advanced presentation empowers all the welding parameters to be preset correctly - either previously or throughout welding. The A6 Mastertrac is not difficult to utilize and once it is running, it requires just the supervision of the administrator. The automat could be supplied for SAW in single, twin or paired version. It is additionally otainable for GMAW.
Motorized welding carriage - Miggytrac™ 1001
The Miggytrac™ 1001 is a small and compact, motor-powered tractor to which a standard ESAB welding torch can be quickly attached.
The four driving wheels, together...
The four driving wheels, together...
Motorized welding carriage - Miggytrac™ 1001
The Miggytrac™ 1001 is a small and compact, motor-powered tractor to which a standard ESAB welding torch can be quickly attached.
The four driving wheels, together with the magnet which is fitted on the tractor, guarantee even, stable movement. The magnet holds the tractor in the correct position on the workpiece, even if it is bent or angled. The tractor functions as a straightforward remote control for the feed unit; you decide on the travel direction and then start and stop welding from the panel. The panel features additional functions such as travel speed settings, wire feed, voltage and welding on/off. The tractor follows the joint using guide wheels.
The four driving wheels, together with the magnet which is fitted on the tractor, guarantee even, stable movement. The magnet holds the tractor in the correct position on the workpiece, even if it is bent or angled. The tractor functions as a straightforward remote control for the feed unit; you decide on the travel direction and then start and stop welding from the panel. The panel features additional functions such as travel speed settings, wire feed, voltage and welding on/off. The tractor follows the joint using guide wheels.
Arc welding carriage / motor-driven - Miggytrac™ 2000
The Miggytrac™ 2000 is a small, compact, motor-operated trolley that is designed for the mechanisation of GMAW, gas metal arc welding,...
Arc welding carriage / motor-driven - Miggytrac™ 2000
The Miggytrac™ 2000 is a small, compact, motor-operated trolley that is designed for the mechanisation of GMAW, gas metal arc welding, in particular. Just fix the torch in the holder and Miggytrac 2000 will take over the welding procedure. The permanent built-in magnet, which can be switched on/off, holds the tractor in the correct position on the workpiece. The lightweight trolley has four-wheel drive to ensure smooth and steady welding travel.
The Miggytrac 2000 has a digital display to permit simple programming. It is very easy to move the trolley from one welding task to the next.
The Miggytrac 2000 has a digital display to permit simple programming. It is very easy to move the trolley from one welding task to the next.
MIG-MAG welding carriage / magnetic - FDV 15 MF
The FVD 15 MF range of welding carriages is ideal for use in MIG/MAG welding applications. This compact and battery-operated range is characterized...
MIG-MAG welding carriage / magnetic - FDV 15 MF
The FVD 15 MF range of welding carriages is ideal for use in MIG/MAG welding applications. This compact and battery-operated range is characterized by its magnetic base, that gives the machine the ability to travel on vertical and oblique angled surfaces without any track systems. Its guide wheels are also designed to automatically track the welding torch.
All models in the series are equipped with an integrated control unit and a universal standard torch holder for both machine and manual torches. Moreover, the units also come with a 14.4 V/3 Ah and 230 V battery charger.
All models in the series are equipped with an integrated control unit and a universal standard torch holder for both machine and manual torches. Moreover, the units also come with a 14.4 V/3 Ah and 230 V battery charger.
MIG-MAG welding carriage / automatic - FTV 20-25
The FTV 25 rail carriage features a compact design, well suited for a variety of mechanized...
MIG-MAG welding carriage / automatic - FTV 20-25
The FTV 25 rail carriage features a compact design, well suited for a variety of mechanized longitudinal welding operations (MIG/MAG). It is equipped with four linear guide rolls that require zero maintenance, a bidirectional limit switch function, and is driven by an AC motor with a rack and pinion actuator, along with the motor coupling for manual movement.
Automatic welding carriage - MEGATRAC 5 / SUBARC 2
The Megatrac 5/ Subarc 2 by Air Liquide is a modular carriage which can readily adapt to numerous type of applications. It has air grades that has fiat and...
Automatic welding carriage - MEGATRAC 5 / SUBARC 2
The Megatrac 5/ Subarc 2 by Air Liquide is a modular carriage which can readily adapt to numerous type of applications. It has air grades that has fiat and...
Automatic welding carriage - MEGATRAC 4 / SUBARC 3
Air Liquide Welding Megatrac 6 is a modular S.A. carriage that allows adaptation to a range of applications.
The...
The...
Automatic welding carriage - MEGATRAC 4 / SUBARC 3
Air Liquide Welding Megatrac 6 is a modular S.A. carriage that allows adaptation to a range of applications.
The plates are available in flat and angle assembly in all grades. They provide a speed of 12 to 150 cm/min and have dimensions of 725 x 750 x 340 mm. It has a weight of 17 kg, and it weighs 58 kg with welding equipment. The diameter of wheels is 100 mm.
The plates are available in flat and angle assembly in all grades. They provide a speed of 12 to 150 cm/min and have dimensions of 725 x 750 x 340 mm. It has a weight of 17 kg, and it weighs 58 kg with welding equipment. The diameter of wheels is 100 mm.
Automatic welding carriage / twin-wire - MEGATRAC 6 / SUBARC 3C
The MEGATRAC 6 & SUBARC 3C twin wire features a 150 mm wheel diameter...
Automatic welding carriage / twin-wire - MEGATRAC 6 / SUBARC 3C
The MEGATRAC 6 & SUBARC 3C twin wire features a 150 mm wheel diameter with a dimension of 1 000 x 900 x 650 mm. It offers a speed level ranging from 10 to 200 cm/min. with an available 100 kg carriage capacity. Also, it is equipped with an angled and flat plate assembly.
Automatic welding carriage - MEGATRAC 6 / SUBARC 3C
Air Liquide Megatrac 6 offers speed in the range of 10 to 200 cm/min and has dimensions of 1000...
Automatic welding carriage - MEGATRAC 6 / SUBARC 3C
Air Liquide Megatrac 6 offers speed in the range of 10 to 200 cm/min and has dimensions of 1000 x 900 x 650 mm. The modular S.A. carriage allows adaptation to a range of applications.
The plates have flat and angle assembly in all thicknesses and grades. The welding equipped carriage weighs 100 kg without consumables nor recycling unit. The diameter of wheels is 150 mm.
The plates have flat and angle assembly in all thicknesses and grades. The welding equipped carriage weighs 100 kg without consumables nor recycling unit. The diameter of wheels is 150 mm.