+7 (812) 645-08-06
Special adhesives
select brand
Contact adhesive - max. 80 °C | 10.1603.0203
This contact glue can is made of CR polychloroprene adhesive. It can be used at +80 °C temperature...
Contact adhesive - max. 80 °C | 10.1603.0203
This contact glue can is made of CR polychloroprene adhesive. It can be used at +80 °C temperature...
Contact adhesive - 10.1603.0210
The APSOpart's thinner for contact glue is a high performance and and product...
Contact adhesive - 10.1603.0210
The APSOpart's thinner for contact glue is a high performance and and product that can be used to reduce the viscosity of contact adhesive, specially on polychloroprene base. The package of the product contains a safety data sheet for the note regulations to ensure the security of consumers.
Rubber adhesive / contact - max. 70 °C | 10.1603.2501
This is a cold-cured solvent containing contact adhesive with elastic bonding joints. It is to be used with 4% of the cross-linking agent.
Its adhesive basis is polychloroprene...
Its adhesive basis is polychloroprene...
Rubber adhesive / contact - max. 70 °C | 10.1603.2501
This is a cold-cured solvent containing contact adhesive with elastic bonding joints. It is to be used with 4% of the cross-linking agent.
Its adhesive basis is polychloroprene (CR). Once set active it should be used in the next 2 hours and its working temperature is 70 degrees Celsius. It is mostly used for joining rubber parts together and rubber-metal combinations.
The application is simple as it requires coating both surfaces 2 to 3 times with a break of 30 minutes between the applications. The final coating needs to dry for only 5 minutes. The manufacturer provides detailed information about hazards and precautions both on the original package and on the safety data sheet.
Its adhesive basis is polychloroprene (CR). Once set active it should be used in the next 2 hours and its working temperature is 70 degrees Celsius. It is mostly used for joining rubber parts together and rubber-metal combinations.
The application is simple as it requires coating both surfaces 2 to 3 times with a break of 30 minutes between the applications. The final coating needs to dry for only 5 minutes. The manufacturer provides detailed information about hazards and precautions both on the original package and on the safety data sheet.
Single-component adhesive / low bonding strength / thread locking / for metals - 6 Nm, -55 °C ... +150 °C | Loctite 222
The Loctite® 222 low-strength, general purpose Threadlocker has a 6Nm...
Single-component adhesive / low bonding strength / thread locking / for metals - 6 Nm, -55 °C ... +150 °C | Loctite 222
The Loctite® 222 low-strength, general purpose Threadlocker has a 6Nm...
Single-component adhesive / thread locking / for metals - 20 Nm, -55 °C ... +150 °C | Loctite 2400
LOCTITE 2400 adhesive is threadlocker for average duty capacity that obtains a breakaway torque ratio of 20 Nm. They...
Single-component adhesive / thread locking / for metals - 20 Nm, -55 °C ... +150 °C | Loctite 2400
LOCTITE 2400 adhesive is threadlocker for average duty capacity that obtains a breakaway torque ratio of 20 Nm. They are designed with proper health and safety consideration for secured utilization. It can be applied to cured materials with critical endurance to heat and harmful substances in manual services that attain frequent disassembly.
It has Water Regulations Advisory Scheme accreditation for use with hot and cold potable liquid.
It has Water Regulations Advisory Scheme accreditation for use with hot and cold potable liquid.
Single-component adhesive / thread locking / for metals - -55 °C ... +150 °C | LOCTITE 221
LOCTITE 221 Low strength, low viscosity, small threads Threadlocker, Breakaway torque 8.5Nm
Technical...
Technical...
Single-component adhesive / thread locking / for metals - -55 °C ... +150 °C | LOCTITE 221
LOCTITE 221 Low strength, low viscosity, small threads Threadlocker, Breakaway torque 8.5Nm
Technical...
Technical...
Single-component adhesive / thread locking / for metals - 11.5 Nm, -55 °C ... +150 °C | Loctite 242
The Loctite 252 all-purpose thread-locking fluid is designed to secure fasteners such as...
Single-component adhesive / thread locking / for metals - 11.5 Nm, -55 °C ... +150 °C | Loctite 242
The Loctite 252 all-purpose thread-locking fluid is designed to secure fasteners such as...
Single-component adhesive / thread locking / for metals - 26 Nm, -55 °C ... +180 °C | Loctite 243
The Loctite 243 is a threadlocker that can be applied on all metals involving passive...
Single-component adhesive / thread locking / for metals - 26 Nm, -55 °C ... +180 °C | Loctite 243
The Loctite 243 is a threadlocker that can be applied on all metals involving passive substrates like stainless steel, aluminum, etc. It can tolerate industrial oil contamination like engine oils and can also hinder loosening on vibrating parts such as pumps and presses. It allows disassembly along with the hand tools.
UV-curable adhesive - UV15LV
The UV Curable Adhesive is suitable for a wide range of applications such as bonding, coating, sealing fiber in various fields, namely...
UV-curable adhesive - UV15LV
The UV Curable Adhesive is suitable for a wide range of applications such as bonding, coating, sealing fiber in various fields, namely...
Elastomeric adhesive - X17
Master Bond Polymer System X17 is a comprehensively concocted solution for adhesive functions, ideally for bonding polyolefins like polypropylene, polyethylene and other polymer-based components....
Elastomeric adhesive - X17
Master Bond Polymer System X17 is a comprehensively concocted solution for adhesive functions, ideally for bonding polyolefins like polypropylene, polyethylene and other polymer-based components. It is a synthetic elastomeric mixture that features a shear and peel technology that enhances its bonding capabilities for polyvinyl chloride compounds. It is composed of 24 percent solid element and the other part as a special chemical that has an easy-drying properties once applied, which helps strengthen its adhesive skills with stronger fixing.
This elastomer optimizes its function on applications to surfaces that are mated after treatment to substrate samples. It permits strengthened sealing on polyolefins even without pretreatment on the plane.
This elastomer optimizes its function on applications to surfaces that are mated after treatment to substrate samples. It permits strengthened sealing on polyolefins even without pretreatment on the plane.
UV-curable adhesive / non-yellowing - -80 ... 300 °F | UV15-7
A single-component, non-yellowing UV curable polymer system, the UV15-7 by Master Bond is ideal for a range of high performance tasks in coating, sealing, encapsulation and bonding. Offering superior strength,...
UV-curable adhesive / non-yellowing - -80 ... 300 °F | UV15-7
A single-component, non-yellowing UV curable polymer system, the UV15-7 by Master Bond is ideal for a range of high performance tasks in coating, sealing, encapsulation and bonding. Offering superior strength,...
High-temperature adhesive - max. 600 °F
The Master Bond is a bonding, sealing, and coating compound product that is highly resistant to high temperatures of up to 316°C. The adhesives come in three varieties to fulfill specific...
High-temperature adhesive - max. 600 °F
The Master Bond is a bonding, sealing, and coating compound product that is highly resistant to high temperatures of up to 316°C. The adhesives come in three varieties to fulfill specific...
Environmentally friendly adhesive - EP21LV/UV15/LED401/MB600/MasterSil705
Master bond comprises of adhesives, sealants, and coatings that does not contain any chemical substance, solvents or any volatiles making it ecological friendly....
Environmentally friendly adhesive - EP21LV/UV15/LED401/MB600/MasterSil705
Master bond comprises of adhesives, sealants, and coatings that does not contain any chemical substance, solvents or any volatiles making it ecological friendly. Because of this, it has reach the health standards fit for the environment. It is made up mainly of epoxies, silicone, polyurethanes, poly sulfides, and UV curves. It offers good product durability that can resist abrasion, chemical spills, impact and shock. If it gets damaged the repair is easy to manage. It is also an electrical insulator that can absorb heat up to the highest possible temperature. It has a "no stain" feature as it can easily be washed by water.