Resistance welding machines, spot welding machines

select brand


Utz

Roll container with plastic base - 800 x 600 mm

Often, heavily laden plastic containers have to be manually transported within a...

Roll container with plastic base - 800 x 600 mm

Often, heavily laden plastic containers have to be manually transported within a company due to internal operational procedures. On our load-bearing transport dollies, loads of several hundred kilos can be transported quickly and easily. The smooth-running and powerful casters reduce the effort required to a minimum.
ARO

Projection welding machine / for pneumatic cylinders - 30 - 115 kVA, 6 bars | M series

M range :

30 to 115kVA
740daN at 6 bars
Effective distance between plates : 150mm
Pneumatic cylinder (single or double stroke)

Projection welding machine / for electric actuator / for pneumatic cylinders - 90 - 235 kVA, 6 bar | P series

P range :

90 to 235kVA
740daN to 1380daN at 6 bars
Effective distance between plates : 250mm
Pneumatic cylinder (single stroke single stage or single stroke double stage) or electric actuator

Spot welding machine / compact - max. 11 500 A | Ergoweld 12K

The Ergoweld 12K is spot welding equipment operating with medium frequency and air cooling which allows a maximum welding current up to 11500A. Very easy to handle, its possibilities will surprise you thanks to an extensive number of accessories.
Equally...

Spot welding machine / compact - max. 11 500 A | Ergoweld 12K

The Ergoweld 12K is spot welding equipment operating with medium frequency and air cooling which allows a maximum welding current up to 11500A. Very easy to handle, its possibilities will surprise you thanks to an extensive number of accessories.
Equally available to you is a large choice of welding tools:

Compact and ergonomic gun in X or C can attain a force up to 450daN at 5 bar
A light weight single and double spot welding gun designed for the single side welding or dent pulling

Supplied with a simple and intuitive machine interface, the training is very quick and you are ensured of optimal performance here after. Ergoweld 12K is using innovative and high performing software which is integrating a safeguard of your welding parameters and ensures easily updated thanks to a USB port situated in the front panel. The Ergoweld 12K does not need a particular electric installation: a 32A supply is sufficient.

Projection welding machine / for pneumatic cylinders - 53 - 115 kVA, 6 bar | AROflex series

AROflex range :

53 to 115kVA
740 daN or 1380 daN at 6 bars
Effective distance between plates : 350mm
Pneumatic cylinder (single stroke single stage or single stroke double stage)

Projection welding machine / for pneumatic cylinders / for electric actuator - 170 - 550 kVA, 6 bar | MOS series

MOS range :

170 to 550kVA
720daN to 3500daN at 6 bars
Effective distance between plates : 300mm
Pneumatic cylinder (single or double stroke) or electric actuator
Miyachi America

Spot welding welder / inverter - HF series

The Miyachi Unitek's HF series is an inverter welding machine which is ideal for various applications in solar cells, automotive electronics, battery pack assembly,...

Spot welding welder / inverter - HF series

The Miyachi Unitek's HF series is an inverter welding machine which is ideal for various applications in solar cells, automotive electronics, battery pack assembly, medical device components, batter tabs and other comparable implementations. It is equipped with an envelope and force control functions. It is capable of processing accurately controlled heating. This is possible through the machine's precise running and monitoring of both of the mechanical and the electrical parameters in a full closed-loop operations. This makes it ideal for automation enabling it to suffice and meet multiple requirements of its application.

Dual-pulse power supply / for spot welding - DP series

These applications were designed specifically for welding applications that require precision. The capacitive discharge power supplies are controlled by a microprocessor, storing multiple weld...

Dual-pulse power supply / for spot welding - DP series

These applications were designed specifically for welding applications that require precision. The capacitive discharge power supplies are controlled by a microprocessor, storing multiple weld schedules and providing weld energy that is consistent, defined by fast rise times. This aspect is important when it comes to welding of highly-conductive materials, including brass and copper.

The control system is able to provide a highly-stable output, regardless of the fluctuations of voltage, which results in repeatable energy being delivered between welds. The short weld times result in minimal part marking and deformation, while the optional built-in weld motor and the maximum of 128 programmable weld schedules are also worth mentioning.

Spot welding machine - STA series

The Miyachi Unitek's STA series comprises of controls mainly for welding applications. It is specifically made to control and operate...

Spot welding machine - STA series

The Miyachi Unitek's STA series comprises of controls mainly for welding applications. It is specifically made to control and operate robotic systems, rocker arm welders, press welders, multi-gun and portable gun machines, seam welders as well as projection welders. It is integrated with an affluent-to-use programming interface. The entire product line includes STA-100A up to the STA-800A. Each of these comes with a space for up to eight contractors which can be plunged through a single control.

Spot welding welder / inverter - 0.10 - 9.9 kW | HF2

The High Frequency Inverter Spot Welding Power Supply (HF2) from Miyachi is mainly used to weld small parts in a short period...

Spot welding welder / inverter - 0.10 - 9.9 kW | HF2

The High Frequency Inverter Spot Welding Power Supply (HF2) from Miyachi is mainly used to weld small parts in a short period of time. It has an optional built-in weld sentry with SPC capability, and offers an excellent welding performance. This machine provides an increased speed feedback system control for weld current, voltage or power. Moreover, it uses a user interface that is normally graphical and alpha-numeric. It also has input and output outlets for integrated automation.

Spot welding welder / inverter - max. 300 kW | ISA series

The ISA series that is manufactured by MIYACHI, is a mid-frequency inverter resistance welding power supply developed to provide effective, and reliable...

Spot welding welder / inverter - max. 300 kW | ISA series

The ISA series that is manufactured by MIYACHI, is a mid-frequency inverter resistance welding power supply developed to provide effective, and reliable quality performance and control. It is specifically used in nut resistance spot welding, motor armature fusing, automotive sheet metal and components, and markless welding. Its compact, robust, NEMA-style design is constructed out of durable materials that is suitable even in harsh production environments.

The series has a rated capacity ranging from 182 up to 1250 kVA with a maximum primary output ranging from 500 up to 4000 amps.
{{item.name}}