Gas tungsten arc welding power supplies (TIG)

select brand


ESAB

TIG welder / MMA / inverter / DC - max. 220 A | Caddy Tig 2200i AC/DC

The Caddy® Tig 2200i from ESAB is a small and portable inverter for AC/DC TIG welding with HF or LiftArc™ start, and MMA. It features a impact resistant and rugged build with OKC 50 cable connector and easy operation with...

TIG welder / MMA / inverter / DC - max. 220 A | Caddy Tig 2200i AC/DC

The Caddy® Tig 2200i from ESAB is a small and portable inverter for AC/DC TIG welding with HF or LiftArc™ start, and MMA. It features a impact resistant and rugged build with OKC 50 cable connector and easy operation with...

TIG welder / MMA / inverter / AC - max. 340 A | Heliarc 283i/353i AC/DC

Heliarc™ 283i/353i AC/DC introduced by ESAB is a power source best suited for innovated AC/DC TIG welding of aluminum, magnesium, stainless steel, mild steel, copper, magnesium and aluminum...

TIG welder / MMA / inverter / AC - max. 340 A | Heliarc 283i/353i AC/DC

Heliarc™ 283i/353i AC/DC introduced by ESAB is a power source best suited for innovated AC/DC TIG welding of aluminum, magnesium, stainless steel, mild steel, copper, magnesium and aluminum alloys. It features a strong arc capacity with settings that ensures high degree arc control and rapid welding speed. It offers a two TIG applications that provides users a manually control weld puddle fluidity. It has a handy heat input and weld pool control that improves the aesthetic weld bead structure. To continue, it has a Superior Stick (SMAW) function even with Cellulosic’ AWS 60XX electrodes and an AC Liftarc Mode system applicable for operations where HF (High Frequency) is not required. Also, it has an availabe AC pulsing rate of 0.2-2Hz.

MMA welder / TIG / AC / DC - 4 - 300 A | Origo™ Tig 3000i

The Origo™ Tig 3000i series of TIG welding machines from ESAB, may be used with applications concerning any material type and thickness....

MMA welder / TIG / AC / DC - 4 - 300 A | Origo™ Tig 3000i

The Origo™ Tig 3000i series of TIG welding machines from ESAB, may be used with applications concerning any material type and thickness. It employs the QWave technology which allows silent AC welding with high arc stability. The weld pool is maximized by the balance control and the AC frequency. Heat input is controlled by the DC pulsed TIG welding, and programming during the welding process is possible due to the ESAB 2-program function. Furthermore, it allows MMA welding through the hot start, polarity switch, and the arc force.

TIG welder / MMA / AC / inverter - 4 - 430 A | Origo™ Tig 4300iw

The Origo™ Tig 4300iw is built for TIG-welding of all materials. Its features include a straightforward panel, an AC frequency and balance control...

TIG welder / MMA / AC / inverter - 4 - 430 A | Origo™ Tig 4300iw

The Origo™ Tig 4300iw is built for TIG-welding of all materials. Its features include a straightforward panel, an AC frequency and balance control that maximizes weld pool, an ESAB 2-program function that guarantees program adjustments even during welding in addition to an energy save mode.

It consists of an QWave™ that allows AC welding with high arc stability and diminished noise, an ESAB LogicPump, a DC Pulsed TIG welding for simple heat input and the weld pool manipulation along with MMA welding in AC and DC mode that includes Arc force, polarity switch (DC) and Hot start.

MMA welder / TIG / AC / DC - max. 315 A | Tigaid 315

Tigaid 315 AC/DC

The Tigaid 315 AC/DC is a useful tool for converting MMA machines,...

MMA welder / TIG / AC / DC - max. 315 A | Tigaid 315

Tigaid 315 AC/DC

The Tigaid 315 AC/DC is a useful tool for converting MMA machines, transformers and rectifiers for TIG applications. Tigaid controls the supply of current, HF ignition and gas flow. When steplessly and electronically-controlled MMA power sources are used, it is possible to obtain current setting and slope functions.
FRONIUS

TIG welder / MAG / MIG / pulsed - 3 - 270 A | TransPuls Synergic 2700

The TransPuls Synergic 2700 MIG/MAG power source utilizes a fully digital interface for spray arcs and short-circuit arcs. This makes this welding solution highly...

TIG welder / MAG / MIG / pulsed - 3 - 270 A | TransPuls Synergic 2700

The TransPuls Synergic 2700 MIG/MAG power source utilizes a fully digital interface for spray arcs and short-circuit arcs. This makes this welding solution highly modular, with its consistent production results and flexible design. This particular model has an output of 270 A, ideal for TIG, MIG/MAG and electrode welding operations.

The system has been used in welding applications in vehicle manufacturing, chemical plant construction, component supply engineering, equipment construction, shipyard operations, and the like. This model is specifically optimized for use with chromium-nickel brazing and flux-cored or solid wires.

MAG welder / MIG / TIG / pulsed - 3 - 270 A | TransPuls Synergic 2700 MV

TransPuls Synergic 2700 MV power source is a digital metal inert and active gas-based solution for a variety of welding applications. It features a portable...

MAG welder / MIG / TIG / pulsed - 3 - 270 A | TransPuls Synergic 2700 MV

TransPuls Synergic 2700 MV power source is a digital metal inert and active gas-based solution for a variety of welding applications. It features a portable pulse soldering device, which obtains 270 A. It has special adaptability to aluminum, and is also applicable to short circuit, spray, and pulsed arcs, providing optimal functionality with high-level of repeatability. It integrates a wire-feed unit that permits use even at construction areas, mechanical workshops and repair and maintenance facilities. Its multi-processing property enable extended application to TIG and electrode welding.

TIG welder / MAG / MIG / pulsed - 3 - 270 A | TransPuls Synergic 2700 CMT

The TransPuls Synergic 2700 MIG/MAG power source utilizes a fully digital interface for spray arcs and short-circuit arcs, making welding solution highly modular with its consistent production results and...

TIG welder / MAG / MIG / pulsed - 3 - 270 A | TransPuls Synergic 2700 CMT

The TransPuls Synergic 2700 MIG/MAG power source utilizes a fully digital interface for spray arcs and short-circuit arcs, making welding solution highly modular with its consistent production results and flexible design. Its intuitive user module allows for easy button-operated controls with microprocessor technology.

This particular model has a welding capacity output of 270 A, and is ideal for electrode, MIG/MAG and TIG welding, and both robotic and manual operations. The unit also makes use of Cold Metal Transfer (CMT) technology, which uses minimal current flow.

The system has been used in welding applications in vehicle manufacturing, chemical plant construction, component supply engineering, equipment construction, shipyard operations, and the like.

TIG welder / MAG / MIG / pulsed - 3 - 270 A | TransPuls Synergic 2700 CMT MV

The TransPuls Synergic 2700 MIG/MAG power source utilizes a fully digital interface for spray arcs and short-circuit arcs. This makes this welding solution highly modular, with its consistent production results and flexible design....

TIG welder / MAG / MIG / pulsed - 3 - 270 A | TransPuls Synergic 2700 CMT MV

The TransPuls Synergic 2700 MIG/MAG power source utilizes a fully digital interface for spray arcs and short-circuit arcs. This makes this welding solution highly modular, with its consistent production results and flexible design. Its intuitive user module allows for easy button-operated controls with microprocessor technology.

This particular model has a welding capacity output of 270 A, and is ideal for electrode, MIG/MAG and TIG welding, and both robotic and manual operations. The unit also makes use of Cold Metal Transfer (CMT) technology, which uses minimal current flow.

The system has been used in welding applications in vehicle manufacturing, chemical plant construction, component supply engineering, equipment construction, shipyard operations, and the like. A multi-voltage model is available, capable of automatic switching between different voltages.

TIG welder / MIG / MAG / pulsed - 3 - 270 A | TransPuls Synergic 2700 TIG

TransPuls Synergic 2700 is suitable for short circuit, pulsed arcs and spray being a fully-digitized device, controlled by a microprocessor, MIG/MAG power source,...

TIG welder / MIG / MAG / pulsed - 3 - 270 A | TransPuls Synergic 2700 TIG

TransPuls Synergic 2700 is suitable for short circuit, pulsed arcs and spray being a fully-digitized device, controlled by a microprocessor, MIG/MAG power source, producing an output of 270A. The item is able to give the best weld properties in every respect, along with reproducible results every single time.

The wire-feed unit is integral and guarantees portable use for various construction sites, making it suitable for various repair and maintenance activities. The multi-process power source is suitable for TIG, MIG/MAG and electrode welding. The TIG version supports various special functions, including the TIG Comfort Stop.
Miyachi America

TIG welder / MIG / pulsed - 300 A | MAWA

The MAWA-300A pulsed micro TIG or Tungsten Inert Gas is Miyachi’s high performance power supply which...

TIG welder / MIG / pulsed - 300 A | MAWA

The MAWA-300A pulsed micro TIG or Tungsten Inert Gas is Miyachi’s high performance power supply which is highly suitable for the welding of certain terminals and coils, coated wires and bus wires. It supplies a consistent supply of current ranging from 30 and 300 amperes. This device directly targets small, industrial automotive, medical, electronic and battery components thus featuring a high level of consistency.
{{item.name}}