Acrylic adhesives

select brand


LOCTITE

Methacrylate adhesive / single-component / low-viscosity / low bonding strength - -55 °C ... +150 °C | LOCTITE 241

LOCTITE 241 Medium strength, low viscosity, small threads threadlocker, Breakaway torque 11.5N


Technical...

Methacrylate adhesive / single-component / low-viscosity / low bonding strength - -55 °C ... +150 °C | LOCTITE 241

LOCTITE 241 Medium strength, low viscosity, small threads threadlocker, Breakaway torque 11.5N


Technical...

Acrylic adhesive / for ceramics / for metal / for glass - -40 °C ... +150 °C | LOCTITE AA 3926

LOCTITE AA 3926 LC MED Light Cure Adhesive - High viscosity, for stress sensitive plastics, ISO 10993 certified

Your Benefit

UV-light and/or visible light curing acrylic
...

Acrylic adhesive / for ceramics / for metal / for glass - -40 °C ... +150 °C | LOCTITE AA 3926

LOCTITE AA 3926 LC MED Light Cure Adhesive - High viscosity, for stress sensitive plastics, ISO 10993 certified

Your Benefit

UV-light and/or visible light curing acrylic
...
3M Adhesives

Acrylic adhesive / two-component - 3M™ Scotch-Weld™ DP8010


3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 is a two-part acrylic-based adhesive....

Acrylic adhesive / two-component - 3M™ Scotch-Weld™ DP8010

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 is a two-part acrylic-based adhesive. 10:1 mix ratio, 10 minute work life and handling strength in approximately 2 hours. 3M™ Scotch-Weld™ EPX™ Plus II applicator and mix nozzles are required (not included).

10 minute work life
Structurally bonds polyolefins without surface preparation
Medium viscosity
3M Electronics

Acrylic adhesive / wafer / UV-curable - 3500 CP | LC-3200

3m™ LC-3200 is a 100% solids UV reparable acrylic glue. LC-3200 is suitable for impermanent wafer holding of silicon...

Acrylic adhesive / wafer / UV-curable - 3500 CP | LC-3200

3m™ LC-3200 is a 100% solids UV reparable acrylic glue. LC-3200 is suitable for impermanent wafer holding of silicon...

Acrylic adhesive / UV-curable - LC series

The light cure adhesive in this product series was manufactured by industry leader 3M and is the ideal solution for various industry applications, including...

Acrylic adhesive / UV-curable - LC series

The light cure adhesive in this product series was manufactured by industry leader 3M and is the ideal solution for various industry applications, including commodity engineering thermoplastics, mainly due to its ability to cure rapidly, especially when exposed to visible light or UV.

The rapid cure time, along with the one-part structural adhesive chemistry, reduces the cycle time of the assembly. Note that this one-component unit comes with low viscosity and can also be used for microelectronic assembly, along with lamination, rigidizing, wire tacking, potting and encapsulation of electronic components.
{{item.name}}