+7 (812) 645-08-06
Bearing pullers
select brand
Pulling plate - max. ø 380 mm | TRISECTION series
The Puller-Trisection is equipped with three-section extraction plates and are useful for hydraulic and mechanical extractors, capable of completely extracting the bearings...
Pulling plate - max. ø 380 mm | TRISECTION series
The Puller-Trisection is equipped with three-section extraction plates and are useful for hydraulic and mechanical extractors, capable of completely extracting the bearings and other components. The load capacity as well as the extraction force are perfectly linked together with the extraction claws griped under the extraction plates for uniformity of force.
Tilting or bending does not occur even in tightly fitted parts, whereas the high extraction forces are concentrated on the bearing inner ring. Typically, the bearing and the shaft remain unharmed and can be used gain with extraction plates fitted under the bearing along with a few moments.
Tilting or bending does not occur even in tightly fitted parts, whereas the high extraction forces are concentrated on the bearing inner ring. Typically, the bearing and the shaft remain unharmed and can be used gain with extraction plates fitted under the bearing along with a few moments.
Hydraulic post puller - max. 6 t | PPU 22 HD
Chicago Pneumatics Post Pullers have the power to lift 6 tons of weight and the chain tightening clamp. It has enough power to get your job done.
This...
This...
Hydraulic post puller - max. 6 t | PPU 22 HD
Chicago Pneumatics Post Pullers have the power to lift 6 tons of weight and the chain tightening clamp. It has enough power to get your job done.
This machine can handle loads of various shapes and for the more demanding tasks it can increase its capacity by 4 tons if the separate hand lever is used.
These post pullers can be fitted with their own hydraulic pack ort they can be connected to the hydraulic systems of the excavator, loader or truck.
Ideal usage for these post pullers is removing wooden or steel fence posts, concrete foundations, crash barriers and similar heavy loads.
This machine can handle loads of various shapes and for the more demanding tasks it can increase its capacity by 4 tons if the separate hand lever is used.
These post pullers can be fitted with their own hydraulic pack ort they can be connected to the hydraulic systems of the excavator, loader or truck.
Ideal usage for these post pullers is removing wooden or steel fence posts, concrete foundations, crash barriers and similar heavy loads.
Hydraulic bearing puller / three-arm - HP 5
The HP 17 is a hydraulic bearing puller with three arms developed by Holmatro...
Hydraulic bearing puller / three-arm - HP 5
The HP 17 is a hydraulic bearing puller with three arms developed by Holmatro Industrial Equipment B.V.. It works as a puller set which can be used to be partnered with a broad selection of pulleys. Accessories, such as Jacks are needed for the operation of each puller set. Jacks are ordered separately.
Hydraulic bearing puller / three-arm - HP 10
The HP 10 from Holmatro is a three-arm hydraulic bearing puller. It is applicable for a broad range of pulleys. Furthermore, the jacks needed for each puller set can be ordered separately.
Hydraulic bearing puller / three-arm - HP 17
The Puller Set HP 17, manufactured by Holmatro, is designed...
Hydraulic bearing puller / three-arm - HP 17
The Puller Set HP 17, manufactured by Holmatro, is designed for application in a broad range of pulleys. Furthermore, the device compact and lightweight which can be used in any positions. The jacks used for the pulley is sold separately.
Hydraulic bearing puller / three-arm - HP 30
The Puller Set HP 30, manufactured by Holmatro, is designed with adjustable...
Hydraulic bearing puller / three-arm - HP 30
The Puller Set HP 30, manufactured by Holmatro, is designed with adjustable features for installation in various pulleys. Furthermore, it is a solid, lightweight device which can be used in any position. The jacks which are needed for the puller is sold separately.