+7 (812) 645-08-06
Paint pumps
select brand
Pneumatic pump / paint / stainless steel - 7.5 - 15 l/min | Maple
Flow rate : max 450.0 l/h
Operating pressure : max 6.0 bar
With fluid sections made of stainless steel, these horizontal Binks Maple Air Drive Motors (15/3) are ideal for solvent-based, waterborne and xirallic materials. A patented quick exhaust technology is utilized by the low ice air motor....
Operating pressure : max 6.0 bar
With fluid sections made of stainless steel, these horizontal Binks Maple Air Drive Motors (15/3) are ideal for solvent-based, waterborne and xirallic materials. A patented quick exhaust technology is utilized by the low ice air motor....
Pneumatic pump / paint / stainless steel - 7.5 - 15 l/min | Maple
With fluid sections made of stainless steel, these horizontal Binks Maple Air Drive Motors (15/3) are ideal for solvent-based, waterborne and xirallic materials. A patented quick exhaust technology is utilized by the low ice air motor.
Magnetic detent is incorporated by the pneumatic sleeve valves and spool for the purpose of eliminating stall conditions. Thrust is equal on each stroke to provide an equal amount of flow pressure. Maximum operating life is guaranteed between services thanks to the ceramic coated pistons and tungsten carbide ball seats. In addition to high-quality materials, the construction of the pump includes surface treatments.
Preventative maintenance is not required since there are no external exposed shaft seals or packings. Additional features include a sanitary outlet and inlet connections and an energy-efficient air motor combined with technology from the smart electric pumps range.
Magnetic detent is incorporated by the pneumatic sleeve valves and spool for the purpose of eliminating stall conditions. Thrust is equal on each stroke to provide an equal amount of flow pressure. Maximum operating life is guaranteed between services thanks to the ceramic coated pistons and tungsten carbide ball seats. In addition to high-quality materials, the construction of the pump includes surface treatments.
Preventative maintenance is not required since there are no external exposed shaft seals or packings. Additional features include a sanitary outlet and inlet connections and an energy-efficient air motor combined with technology from the smart electric pumps range.
Piston pump / airless / for spraying / paint - 2.85 - 6.6 l/min, max. 8 bar | MX35/35, 35/60 & 30/70
Flow rate : 171 l/h - 396 l/h
Operating pressure : max 8.0 bar
Binks presents MX35/35 MX35/60 and MX30/70 Airless and AAA paint pumps. They set new standards in air-operated pump technology design. They feature patented anti-stall magnetic detents that make pump operation smoother, and enable quick changeover of stroke with...
Operating pressure : max 8.0 bar
Binks presents MX35/35 MX35/60 and MX30/70 Airless and AAA paint pumps. They set new standards in air-operated pump technology design. They feature patented anti-stall magnetic detents that make pump operation smoother, and enable quick changeover of stroke with...
Piston pump / airless / for spraying / paint - 2.85 - 6.6 l/min, max. 8 bar | MX35/35, 35/60 & 30/70
Binks presents MX35/35 MX35/60 and MX30/70 Airless and AAA paint pumps. They set new standards in air-operated pump technology design. They feature patented anti-stall magnetic detents that make pump operation smoother, and enable quick changeover of stroke with almost no pulse. They also have patented quick exhaust valves. This results in top-class paint delivery, free of surge, for the ideal finish. They have pumping power and fluid delivery capacity suited for heavy applications.
MX pumps offer a long service life due to their carbon or stainless steel wetted parts and piston rod with ceramic-coated. The pump provides a 5-year warranty on all materials and workmanship. They offer a no ice/no noise operation. The air motor is lubricant free.
They provide significant reductions in downtime due to the self-adjustable, spring-loaded packings with a big lubricant cup. The fluid section can be quickly disconnected from the air motor for simpler servicing. The pumps are CE marked and complete ATEX approval.
MX pumps offer a long service life due to their carbon or stainless steel wetted parts and piston rod with ceramic-coated. The pump provides a 5-year warranty on all materials and workmanship. They offer a no ice/no noise operation. The air motor is lubricant free.
They provide significant reductions in downtime due to the self-adjustable, spring-loaded packings with a big lubricant cup. The fluid section can be quickly disconnected from the air motor for simpler servicing. The pumps are CE marked and complete ATEX approval.
Diaphragm pump / air-driven / for spraying / paint - max. 17 l/min, max. 7 bar | DVP
Flow rate : max 1020.0 l/h
Operating pressure : max 7.0 bar
The Binks DVP 1:1 ratio diaphragm pump package is a perfect choice for people wishing to combine high quality finishes and durability. Ideal for spray gun applications and transfers of materials. There is a choice of mountings for the unit, including...
Operating pressure : max 7.0 bar
The Binks DVP 1:1 ratio diaphragm pump package is a perfect choice for people wishing to combine high quality finishes and durability. Ideal for spray gun applications and transfers of materials. There is a choice of mountings for the unit, including...
Diaphragm pump / air-driven / for spraying / paint - max. 17 l/min, max. 7 bar | DVP
The Binks DVP 1:1 ratio diaphragm pump package is a perfect choice for people wishing to combine high quality finishes and durability. Ideal for spray gun applications and transfers of materials. There is a choice of mountings for the unit, including a cart, wall mount, or tripod stand. Can deliver rapid fluid distribution of up to 17 l/min, providing an even application, and surge free fluid can be delivered at sixty cycles per minute. Dual air regulators provide the operator with total control over the pump. The pump’s diaphragm design was developed for the direct supply of paints and materials to the spray guns, ensuring a constant a virtually pulse free fluid delivery without the expense and complications of a fluid regulator or surge chamber. The Binks DVP is perfect for use with ALL TYPES of spray gun technologies, and will provide life long trouble free applications, thanks to its immaculate design, and quality construction.
Spraying pump / paint / stainless steel / medium-pressure - 8:1, 14.4 L/min, max. 48 bar | 08.120
Flow rate : 864 l/h
Operating pressure : max 48.0 bar
For circulating and large production.
The Turbo air motor is recommended for continued use.
Features
Large...
Operating pressure : max 48.0 bar
For circulating and large production.
The Turbo air motor is recommended for continued use.
Features
Large...
Spraying pump / paint / stainless steel / medium-pressure - 8:1, 14.4 L/min, max. 48 bar | 08.120
For circulating and large production.
The Turbo air motor is recommended for continued use.
Features
Large diameter suction rod and high compression ratio
Stainless steel design
Simple design , reduced number of spare parts
Benefits
Can be used with a wide range of materials
Compatible with water-based materials
Easy maintenance
The Turbo air motor is recommended for continued use.
Features
Large diameter suction rod and high compression ratio
Stainless steel design
Simple design , reduced number of spare parts
Benefits
Can be used with a wide range of materials
Compatible with water-based materials
Easy maintenance
Piston pump / spraying / fluid / water-based paint - 8:1, 14.4 L/min, max. 48 bar | 08.120F FLOWMAX®
Flow rate : 864 l/h
Operating pressure : max 48.0 bar
For circulating and large production.
The Turbo air motor is recommended for continued use.
Features
Sealing done by one large stroke bellow
Ergonomic...
Operating pressure : max 48.0 bar
For circulating and large production.
The Turbo air motor is recommended for continued use.
Features
Sealing done by one large stroke bellow
Ergonomic...
Piston pump / spraying / fluid / water-based paint - 8:1, 14.4 L/min, max. 48 bar | 08.120F FLOWMAX®
For circulating and large production.
The Turbo air motor is recommended for continued use.
Features
Sealing done by one large stroke bellow
Ergonomic design of fluid passages
Stainless steel design
Balanced fluid section
Mobile piston seal
Benefits
High reliability
No more lubricant cups
Leak free
Total sealing between pump and its environment, ideal to work with
moisture-sensitive catalysts
Ideal for UV and pre-catalyzed materials
Fluid discharge without retention of a wide range of coating materials
Compatible with water-based materials
Constant fluid output pressure
Excellent suction capacity
The Turbo air motor is recommended for continued use.
Features
Sealing done by one large stroke bellow
Ergonomic design of fluid passages
Stainless steel design
Balanced fluid section
Mobile piston seal
Benefits
High reliability
No more lubricant cups
Leak free
Total sealing between pump and its environment, ideal to work with
moisture-sensitive catalysts
Ideal for UV and pre-catalyzed materials
Fluid discharge without retention of a wide range of coating materials
Compatible with water-based materials
Constant fluid output pressure
Excellent suction capacity
Pneumatic pump / for solids / water-based paint / stainless steel - 10:1, 3 l/min, max. 60 bar | 10.25 GT
Flow rate : 180 l/h
Operating pressure : max 60.0 bar
The Kremlin Rexson 10.25 GT is a high performance stainless steel pump designed...
Operating pressure : max 60.0 bar
The Kremlin Rexson 10.25 GT is a high performance stainless steel pump designed...
Pneumatic pump / for solids / water-based paint / stainless steel - 10:1, 3 l/min, max. 60 bar | 10.25 GT
The Kremlin Rexson 10.25 GT is a high performance stainless steel pump designed for a wide range of water-based and high solids materials applications. The pump has a simple yet robust construction that is equipped with a large diameter suction to ensure a high compression ratio and ease of overall maintenance.
Piston pump / paint / stainless steel / constant-pressure - 17:1, 3.6 l/min, 100 bar | 17.A2 FLOWMAX® AIRMIX®
Flow rate : 216 l/h
Operating pressure : max 100.0 bar
The 17.A2 FLOWMAX® pump is equipped with an easy-to-maintain valve assembly sealed with...
Operating pressure : max 100.0 bar
The 17.A2 FLOWMAX® pump is equipped with an easy-to-maintain valve assembly sealed with...
Piston pump / paint / stainless steel / constant-pressure - 17:1, 3.6 l/min, 100 bar | 17.A2 FLOWMAX® AIRMIX®
Flow rate : 216 l/h
Operating pressure : max 100.0 bar
The 17.A2 FLOWMAX® pump is equipped with an easy-to-maintain valve assembly sealed with...
Operating pressure : max 100.0 bar
The 17.A2 FLOWMAX® pump is equipped with an easy-to-maintain valve assembly sealed with...
Pneumatic pump / water-based paint / for solids / stainless steel - 20:1, 3 L/min, 120 bar | AIRMIX® 20.25
Flow rate : 180 l/h
Operating pressure : max 120.0 bar
The 20.25 pump - stainless steel is manufactured by Kremlin Rexson. It has a...
Operating pressure : max 120.0 bar
The 20.25 pump - stainless steel is manufactured by Kremlin Rexson. It has a...
Pneumatic pump / water-based paint / for solids / stainless steel - 20:1, 3 L/min, 120 bar | AIRMIX® 20.25
The 20.25 pump - stainless steel is manufactured by Kremlin Rexson. It has a specifications of 17kg weight, 83.8cm height, 35.6 cm width and 17.78 cm depth. It includes an equal fluid section and covered by mobile piston and to be used with all materials, including water-based and high solids.
Paint pump - 103 - 207 bar | 64B
64B Nordson® pump are comprehensively designed to accommodate multiple guns with an average volume capacity, or a single gun with high-volume viscosity elements. It operates with positive displacement at minimal cycle ratio,...
Paint pump - 103 - 207 bar | 64B
64B Nordson® pump are comprehensively designed to accommodate multiple guns with an average volume capacity, or a single gun with high-volume viscosity elements. It operates with positive displacement at minimal cycle ratio,...
Powder coating pump - 3.92 - 8.16 gpm | PermaFlo® series
PermaFlo® Series Pumps with its strong construction and intelligent design can handle the rigors of pumping abrasive, higher solids coatings. It can also accept a varied range of pressure and volume, thanks to its...
Powder coating pump - 3.92 - 8.16 gpm | PermaFlo® series
PermaFlo® Series Pumps with its strong construction and intelligent design can handle the rigors of pumping abrasive, higher solids coatings. It can also accept a varied range of pressure and volume, thanks to its...
Powder coating pump - max. 4 kg/min | Prodigy® HDLV®
The HDLV High Capacity Transfer pumps by Prodigy make use of dense-phase technology with low-velocity air and high-density power to propel more powder using less compressed air. There are various...
Powder coating pump - max. 4 kg/min | Prodigy® HDLV®
The HDLV High Capacity Transfer pumps by Prodigy make use of dense-phase technology with low-velocity air and high-density power to propel more powder using less compressed air. There are various features and benefits associated with the use of this product, including the ability to move larger power volumes with an impressive speed.
The automatic color change feature is possible without disassembly, while this product is the ideal solution for problematic powder circulation using a small bore hose. The pump can transport up to 4kg per minute over long distances, and users will only require a compact and small surge hopper underneath the cyclone. Note that the item is suitable for bulk feeding virgin powder and the removal of waste powder from an after-filter.
The automatic color change feature is possible without disassembly, while this product is the ideal solution for problematic powder circulation using a small bore hose. The pump can transport up to 4kg per minute over long distances, and users will only require a compact and small surge hopper underneath the cyclone. Note that the item is suitable for bulk feeding virgin powder and the removal of waste powder from an after-filter.
Powder coating pump - 90 ° | Encore®
The Encore series of 90° Powder Pumps from NORDSON employs 90° configurations, and uses less compressed air which enables more powder transport to the part....
Powder coating pump - 90 ° | Encore®
The Encore series of 90° Powder Pumps from NORDSON employs 90° configurations, and uses less compressed air which enables more powder transport to the part....
Powder coating pump - Encore®
Implemented with a new Encore platform, the Inline Pump now carries better performance and additional features.
The new and efficient Encore Inline Pump has a...
The new and efficient Encore Inline Pump has a...
Powder coating pump - Encore®
Implemented with a new Encore platform, the Inline Pump now carries better performance and additional features.
The new and efficient Encore Inline Pump has a compact design which allows it to meet increasing demands. This product is available in both 90-degree and inline configurations. Despite the fact that it utilizes less air, it can still provide more powder with a softer spray, ensuring better efficiency in the first pass, and producing quality finish.
With the new update, experience a better relationship of nozzle to throat and maximize the pump performance. Reduced variability can also be observed in the o-ring, promoting better seal and ground.
The new and efficient Encore Inline Pump has a compact design which allows it to meet increasing demands. This product is available in both 90-degree and inline configurations. Despite the fact that it utilizes less air, it can still provide more powder with a softer spray, ensuring better efficiency in the first pass, and producing quality finish.
With the new update, experience a better relationship of nozzle to throat and maximize the pump performance. Reduced variability can also be observed in the o-ring, promoting better seal and ground.