+7 (812) 645-08-06
Temperature controllers
select brand
Mould insert for fluid circulating thermal regulation - integrat 4D
As a mould maker you know that the most important part in the process chain of producing plastic products is the injection mould. Nowadays, ordinary drilled cooling systems are hardly able to meet the requirements in terms of cycle...
Mould insert for fluid circulating thermal regulation - integrat 4D
As a mould maker you know that the most important part in the process chain of producing plastic products is the injection mould. Nowadays, ordinary drilled cooling systems are hardly able to meet the requirements in terms of cycle time and quality.
The gwk integrat 4D system is the rational answer to the economic cooling process.
For technical parts, the cooling time is 2/3 of the overall cycle time, thus the largest cost-factor; therefore the greatest potential for rationalization lies in a correctly dimensioned cooling process.
Through close-to-cavity and segmented allocation of the cooling surfaces and the water quantities and temperatures necessary to do so it is possible to reach the shortest cooling time, while at the same time achieving the best possible mould quality as well as reducing the reject rate considerably, and realizing a stable production process.
The gwk integrat 4D system is the rational answer to the economic cooling process.
For technical parts, the cooling time is 2/3 of the overall cycle time, thus the largest cost-factor; therefore the greatest potential for rationalization lies in a correctly dimensioned cooling process.
Through close-to-cavity and segmented allocation of the cooling surfaces and the water quantities and temperatures necessary to do so it is possible to reach the shortest cooling time, while at the same time achieving the best possible mould quality as well as reducing the reject rate considerably, and realizing a stable production process.
Water operated thermal regulator - max. 95 °C | integrat direct
The integrat direct is manufactured by gwk Gesellschaft and structured to help regulate...
Water operated thermal regulator - max. 95 °C | integrat direct
The integrat direct is manufactured by gwk Gesellschaft and structured to help regulate...
Temperature control unit for injecting molding - max. 140 °C | integrat 40
The INTEGRAT 40 makes use of all the benefits of segmented mold control through its temperature management system. This system works by absorbing the heat from the different...
Temperature control unit for injecting molding - max. 140 °C | integrat 40
The INTEGRAT 40 makes use of all the benefits of segmented mold control through its temperature management system. This system works by absorbing the heat from the different areas of the mold end and spreading a balanced temperature and flow across the whole mold surface. The mold quality is also enhanced and maximized at quicker cycle times due to the direct cooling. These processes aim to minimize the rejected items and at the same time, target maximum productivity. Moreover, through these processes, the costs of the materials and the handling of the rejected parts are sustained, as well as operational time, which may be optimized for further production.
Water operated thermal regulator / modular - max. 140 °C | integrat plus
The gwk temperature control system integrat plus, is a modular, adaptive temperature control system for any number of circuits...
Water operated thermal regulator / modular - max. 140 °C | integrat plus
The gwk temperature control system integrat plus, is a modular, adaptive temperature control system for any number of circuits to be individually controlled.
The different system components enable optimal adjustment to the process, under technical as well as economical aspects.
Selection of the components is always made on the basis to achieve all the desired properties of the moulded part at the lowest possible cycle time and at a maximum process safety with the lowest sensible investment costs
The different system components enable optimal adjustment to the process, under technical as well as economical aspects.
Selection of the components is always made on the basis to achieve all the desired properties of the moulded part at the lowest possible cycle time and at a maximum process safety with the lowest sensible investment costs
Temperature control unit for injecting molding - max. 350 °C | integrat evolution
Integrat Revolution by GWK utilizes a high performance ceramic innovation located inside the mould. This heater (CPH), positioned a few millimeters from the cavities, ensures faster temperature change,...
Temperature control unit for injecting molding - max. 350 °C | integrat evolution
Integrat Revolution by GWK utilizes a high performance ceramic innovation located inside the mould. This heater (CPH), positioned a few millimeters from the cavities, ensures faster temperature change, while ensuring minimum energy consumption. A temperature controller then cools down the mould using a fluid water medium, which doubles as an insulating medium, allowing for short and intensive cooling phase. A machine signal instigates this phase and ends as the mould opens for a new cycle. The implementation of the CPH and The cooling system, ensures dynamic temperature control. Since they are autonomous from the temperature of the main mould, the temperature of each cavity can be maintained uniformly. The shift between heating and cooling phase is affected by a close-to-cavity placed valve unit.
Water operated thermal regulator - FLOWCON
The FLOWCON Waterflow Regulator is designed with a precise control and excellent production monitoring. It offers a plunger version of solenoid valves with huge seat...
Water operated thermal regulator - FLOWCON
The FLOWCON Waterflow Regulator is designed with a precise control and excellent production monitoring. It offers a plunger version of solenoid valves with huge seat diameter that guarantees a high quality performance even without a good water supply. It features an exceptional supervision and temperature control to protect the molding process quality. It has a serial interface for data transfer to a standard IMM with an available 7 various molds for information setup storage. Also, the FLOWCON Waterflow Regulator is equipped with a tolerance window that detects temperature tolerance rate and has an up to 8 zones individual control capacity.
Hot runner temperature controller - max. 90 °C | TEMPRO plus D90
The TEMPRO plus D90 can work under temperatures running to 90°C and is an...
Hot runner temperature controller - max. 90 °C | TEMPRO plus D90
The TEMPRO plus D90 can work under temperatures running to 90°C and is an...
Hot runner temperature controller - max. 180 °C | TEMPRO plus D140, 180
The TEMPRO plus D series from Wittmann Battenfeld, is made available in various...
Hot runner temperature controller - max. 180 °C | TEMPRO plus D140, 180
The TEMPRO plus D series from Wittmann Battenfeld, is made available in various...
Water operated temperature regulator / for injection presses - max. 200 l/min | TEMPRO plus XL 90
The WITTMANN‘s TEMPRO plus XL 90 can heat up even on big molds within a short time to...
Water operated temperature regulator / for injection presses - max. 200 l/min | TEMPRO plus XL 90
The WITTMANN‘s TEMPRO plus XL 90 can heat up even on big molds within a short time to...
Water operated temperature regulator / for injection presses - max. 140 °C | TEMPRO primus/basic
The TEMPRO C90One is a circuit temperature controller that work under temperatures running up to 90°C. It comes with a self-advancing...
Water operated temperature regulator / for injection presses - max. 140 °C | TEMPRO primus/basic
The TEMPRO C90One is a circuit temperature controller that work under temperatures running up to 90°C. It comes with a self-advancing...
Water operated thermal regulator - MTC-1
The THERMOLATOR® MICROTEMP is a water temperature controller that is ideal for small...
Water operated thermal regulator - MTC-1
The THERMOLATOR® MICROTEMP is a water temperature controller that is ideal for small...
Water operated thermal regulator - Thermolator® TW series
The Thermolator® TW Series are specifically built for the sustenance of process temperature with circulated water that has been...
Water operated thermal regulator - Thermolator® TW series
The Thermolator® TW Series are specifically built for the sustenance of process temperature with circulated water that has been...