+7 (812) 645-08-06
Spraying units (resins)
select brand
Chopper and wet out system - 15 lbs/min (6.8 kg/min) | Patriot™
The Patriot Chop/Wetout system is a resourceful pumping structure which focus on significant statistics issues accomplished in composites application method.
The...
The...
Chopper and wet out system - 15 lbs/min (6.8 kg/min) | Patriot™
The Patriot Chop/Wetout system is a resourceful pumping structure which focus on significant statistics issues accomplished in composites application method.
The device is a framework that conveys exceptional precision, power, versatility and rugged construction for long use. Its highly accurate patriot technology with increased efficiency and improved product quality with minimal overspray and considerable reduce waste materials. It is designed and built with modular components to conceive optimum contour that utilizing swift change element that extend the existence of operation to allow reduce down time.
The device is a framework that conveys exceptional precision, power, versatility and rugged construction for long use. Its highly accurate patriot technology with increased efficiency and improved product quality with minimal overspray and considerable reduce waste materials. It is designed and built with modular components to conceive optimum contour that utilizing swift change element that extend the existence of operation to allow reduce down time.
Fiber spraying unit / simultaneous - 8 - 10 lbs/min (3.63 - 4.54 kg/min) | UltraMAX™
The MVP UltraMAX™ Chop/Wetout system features output capabilities up to 8 - 10 lbs./min (3.63 - 4.54 kg/min), and air usage of maximum 850 l/min, depending...
Fiber spraying unit / simultaneous - 8 - 10 lbs/min (3.63 - 4.54 kg/min) | UltraMAX™
The MVP UltraMAX™ Chop/Wetout system features output capabilities up to 8 - 10 lbs./min (3.63 - 4.54 kg/min), and air usage of maximum 850 l/min, depending...
Chopper and wet out system - 8 - 12 lbs/min (3.63 - 5.36 kg/min) | APS
The APS is an external mixed chop/wetout system that allows the production of high quality uniform laminate parts (no splashing or bouncebacks and less air entrapment)...
Chopper and wet out system - 8 - 12 lbs/min (3.63 - 5.36 kg/min) | APS
The APS is an external mixed chop/wetout system that allows the production of high quality uniform laminate parts (no splashing or bouncebacks and less air entrapment) with significantly reduced overspray and waste of material, while being simple and easy to operate.
It is highly reliable and well suited for non-stop operation as it requires zero maintenance and features patented Fluid Impingement Technology intended for low-pressure chop operations (from 15 to 30 psi). Additionally, this highly customizable unit it is equipped with solid bearing piston guides and ACME thread adjustment and capable of both internal and external mixing.
It is highly reliable and well suited for non-stop operation as it requires zero maintenance and features patented Fluid Impingement Technology intended for low-pressure chop operations (from 15 to 30 psi). Additionally, this highly customizable unit it is equipped with solid bearing piston guides and ACME thread adjustment and capable of both internal and external mixing.
Chopper and wet out system - 1 - 5 lbs/min (0.45 - 2.3 kg/min) | MiniPro
The MiniPro chop/wetout system represents a highly economical model designed for applications with low to medium volumes (1 to 5 lbs/min or 0.45 to 2.3 kg/min) in small or start-up operations. Due to it's...
Chopper and wet out system - 1 - 5 lbs/min (0.45 - 2.3 kg/min) | MiniPro
The MiniPro chop/wetout system represents a highly economical model designed for applications with low to medium volumes (1 to 5 lbs/min or 0.45 to 2.3 kg/min) in small or start-up operations. Due to it's fast and easy setup and simple handling it represents an excellent entry level solution for those making a transition from hand lay-up to mechanization. This model offers reliable low pressure output, while requiring very little maintenance and comes equipped with MVP Pro pumping system that utilizes the stainless steel catalyst pump, allowing simple and easy customization of operating parameters via single pin adjustment. It also features an easy transition from top to bottom strokes as it is equipped with the V-Pro 2000 highspeed reversing valve, that is standard on all Pro series models.
Gelcoat spraying unit - 1 - 6 lbs/min (0.45 - 2.7 kg/min) | Patriot™
The Patriot™ Gelcoat Systems from MVP are capable of correcting quality issues that involve post curing, cracking, inconsistent thickness, porosity, "alligatoring" and other problems that composite manufacturers are...
Gelcoat spraying unit - 1 - 6 lbs/min (0.45 - 2.7 kg/min) | Patriot™
The Patriot™ Gelcoat Systems from MVP are capable of correcting quality issues that involve post curing, cracking, inconsistent thickness, porosity, "alligatoring" and other problems that composite manufacturers are...
Resin spraying unit / fiberglass / simultaneous - FRP
The FRP Chop System is a composite system manufactured by Graco. Its key features include an excellent ratio control that results...
Resin spraying unit / fiberglass / simultaneous - FRP
The FRP Chop System is a composite system manufactured by Graco. Its key features include an excellent ratio control that results to superior quality components and end products and an integrated Graco pump and components that maximizes uptime in production. An adjustable-ratio catalyst pump that allows a convenient ratio change that does not require any tool is also included and a truly engineered linkage that enables outstanding ratio control along with an accessible pump ratio of 13:1.
Gelcoat spraying unit - FRP
The Graco FRP is a high performance gel coat system designed to provide a superior...
Gelcoat spraying unit - FRP
The Graco FRP is a high performance gel coat system designed to provide a superior ratio control that results in a consistent cure for a wide range of applications. The unit is manufactured from high grade materials and components and features an adjustable ratio catalyst pump to guaranty quality results.
Gelcoat spraying unit
the plant is complete with two Robots which grant a careful gel-coat spraying on the moulds before the carrying out of the fiberglass...
Gelcoat spraying unit
the plant is complete with two Robots which grant a careful gel-coat spraying on the moulds before the carrying out of the fiberglass hulls.
The Robots are mounted on a portal unit (with three further axes). In this way handling is allowed on the whole moulds surface; the spraying operations are carried out inside a proper booth complete with a ventilation system in order to avoid damaging solvent concentration; Robots carry out their working with precision and absolute faithfulness.
The Robots are mounted on a portal unit (with three further axes). In this way handling is allowed on the whole moulds surface; the spraying operations are carried out inside a proper booth complete with a ventilation system in order to avoid damaging solvent concentration; Robots carry out their working with precision and absolute faithfulness.