+7 (812) 645-08-06
Pipe extrusion lines
select brand
Tube extrusion line - 2 500 mm
KraussMaffei Berstorff develops PO Pipelines extrusions with completely conventional and fully automated extruders. The pipe lines are ranging from pipe molds, downstream and automatic components for all peripheral equipments. You can get your desired PO pipes wither flat or profiled pipes...
Tube extrusion line - 2 500 mm
KraussMaffei Berstorff develops PO Pipelines extrusions with completely conventional and fully automated extruders. The pipe lines are ranging from pipe molds, downstream and automatic components for all peripheral equipments. You can get your desired PO pipes wither flat or profiled pipes with pipe extrusion systems of KraussMaffei Berstorff. Numerous opportunities are available for you.
We offer a wide range of pipes, including drinking water pipes, drainage pipes, hot water pipes, heating pipes, cable-protecting pipes, gas pipes, multi-layer pipes, PE-X pipes, RTP pipes, co-extrusion pipes with a variety of combinations materials such as aluminum composite pipes, PUR-encapsulated pipes, micro duct bundles, small protective pipes to protect the fiberglass cables and large pipe of 2500 mm.
Our pipes are for various applications, and for each application, we offer a special system that is designed according to your needs. Being a system provider, we always offer critical competitive advantages with our products, like highest degree of flexibility and cost-effectiveness with combination of best quality of product.
We offer a wide range of pipes, including drinking water pipes, drainage pipes, hot water pipes, heating pipes, cable-protecting pipes, gas pipes, multi-layer pipes, PE-X pipes, RTP pipes, co-extrusion pipes with a variety of combinations materials such as aluminum composite pipes, PUR-encapsulated pipes, micro duct bundles, small protective pipes to protect the fiberglass cables and large pipe of 2500 mm.
Our pipes are for various applications, and for each application, we offer a special system that is designed according to your needs. Being a system provider, we always offer critical competitive advantages with our products, like highest degree of flexibility and cost-effectiveness with combination of best quality of product.
PVC pipe extrusion line - 100 - 700 kg/h
The KraussMaffei Berstorff are ultimate in the area of manufacturing plastics from C - PVC due to our superior extrusion technology. The units are perfectly manufactured from a technology...
PVC pipe extrusion line - 100 - 700 kg/h
The KraussMaffei Berstorff are ultimate in the area of manufacturing plastics from C - PVC due to our superior extrusion technology. The units are perfectly manufactured from a technology...
PVC pipe extrusion line
Extrusion line to manufacture medical soft PVC-hoses of 2 to 12 mm outside-diameter.
Tube extrusion line
Extruder ED-N 60x30 D control cabinet with microprocessor control
Pipe-die-head...
Pipe-die-head...
Tube extrusion line
Extruder ED-N 60x30 D control cabinet with microprocessor control
Pipe-die-head
Vaccum-tank 6000 mm long
Spray-cooling bath I, 6000 mm long
Spray-cooling bath II, 6000 mm long
Caterpillar haul-off RA 1200
Cutting saw with exhaustor
Take-off table 6000 mm long
Pipe-die-head
Vaccum-tank 6000 mm long
Spray-cooling bath I, 6000 mm long
Spray-cooling bath II, 6000 mm long
Caterpillar haul-off RA 1200
Cutting saw with exhaustor
Take-off table 6000 mm long
Fluoropolymer pipe extrusion line
Extrusion line for the manufacture of hoses and tubes made of fluoric polymers as PFA, FEP, PVDF, ETFE and ECTFE.
Extruder...
Extruder...
Fluoropolymer pipe extrusion line
Extrusion line for the manufacture of hoses and tubes made of fluoric polymers as PFA, FEP, PVDF, ETFE and ECTFE.
Extruder EN 30 - 25 D with pipe-die-head made of fluor-resistant tool-steel
Vacuum-tank with plexi-glas pre-chamber to adapt the calibration
Belt haul-off EDBA 50 for constant haul-off of the pipes
Dancer control for tension-free winding of the pipes
Single winder EW100 to wind the pipes on drums
Extruder EN 30 - 25 D with pipe-die-head made of fluor-resistant tool-steel
Vacuum-tank with plexi-glas pre-chamber to adapt the calibration
Belt haul-off EDBA 50 for constant haul-off of the pipes
Dancer control for tension-free winding of the pipes
Single winder EW100 to wind the pipes on drums
Plastic-aluminum composite pipe extrusion line
Extruder ED-N 60x30 D control cabinet with microprocessor control
Alu-coating Station AU 110
Pipe-die-head
Vaccum-tank...
Alu-coating Station AU 110
Pipe-die-head
Vaccum-tank...
Plastic-aluminum composite pipe extrusion line
Extruder ED-N 60x30 D control cabinet with microprocessor control
Alu-coating Station AU 110
Pipe-die-head
Vaccum-tank 6000 mm long
Spray-cooling bath I, 6000 mm long
Spray-cooling bath II, 6000 mm long
Sheet edge guiding system
Alu-coating station
Co-Extrusion station
Cooling bath
Caterpillar haul-off RA 1200
Aluminium reinforced PP-R
pipes for hot and cold water
Cutting saw with exhaustor
Take-off table 6000 mm long
Alu-coating Station AU 110
Pipe-die-head
Vaccum-tank 6000 mm long
Spray-cooling bath I, 6000 mm long
Spray-cooling bath II, 6000 mm long
Sheet edge guiding system
Alu-coating station
Co-Extrusion station
Cooling bath
Caterpillar haul-off RA 1200
Aluminium reinforced PP-R
pipes for hot and cold water
Cutting saw with exhaustor
Take-off table 6000 mm long
HDPE pipe extrusion line / PP - non
Extrusion line to manufacture PP-welding rods, with air-channel cooling
Extrusion...
Extrusion...
HDPE pipe extrusion line / PP - non
Extrusion line to manufacture PP-welding rods, with air-channel cooling
Extrusion line for the production of PP-ballpen reservoir
tubes and rigid PVC tubes for ballpen body
Extrusion line for the manufacture of net wooven packagings made of polyethylene.
Extrusion line for the production of PP-ballpen reservoir
tubes and rigid PVC tubes for ballpen body
Extrusion line for the manufacture of net wooven packagings made of polyethylene.
Corrugated pipe extrusion line / for steel reinforced pipes / for drainage pipes - DN 800-1800
Steel Reinforced Corrugated Pipe Machine
Dn 800 to Dn 1800 large diameter drainage pipe
Perfect...
Dn 800 to Dn 1800 large diameter drainage pipe
Perfect...
Corrugated pipe extrusion line / for steel reinforced pipes / for drainage pipes - DN 800-1800
Steel Reinforced Corrugated Pipe Machine
Dn 800 to Dn 1800 large diameter drainage pipe
Perfect pipe ring stiffness SN 8, SN 12.5 and SN 16.
40-50% pipe weight lighter
30-50% material cost saving
20% higher output compared with the last generation
Low machinery investment
one machine can fit larger pipe from DN 800 up to DN 1800.
Dn 800 to Dn 1800 large diameter drainage pipe
Perfect pipe ring stiffness SN 8, SN 12.5 and SN 16.
40-50% pipe weight lighter
30-50% material cost saving
20% higher output compared with the last generation
Low machinery investment
one machine can fit larger pipe from DN 800 up to DN 1800.
Drainage pipe extrusion line / for corrugated pipes / for steel reinforced pipes - DN 300-2500
Steel Reinforced Corrugated Pipe Machine
DN 300 - DN 2500
Stiffness SN 8, SN 12.5, SN 16
Pipe weight reduce 25-50%
Material cost reduce 30%
Compared with the traditional steel and concrete pipe, the plastic pipe has big advantages， such as anti-corrosive, less leakage, light weight and easy installation. But...
DN 300 - DN 2500
Stiffness SN 8, SN 12.5, SN 16
Pipe weight reduce 25-50%
Material cost reduce 30%
Compared with the traditional steel and concrete pipe, the plastic pipe has big advantages， such as anti-corrosive, less leakage, light weight and easy installation. But...
Drainage pipe extrusion line / for corrugated pipes / for steel reinforced pipes - DN 300-2500
Steel Reinforced Corrugated Pipe Machine
DN 300 - DN 2500
Stiffness SN 8, SN 12.5, SN 16
Pipe weight reduce 25-50%
Material cost reduce 30%
Compared with the traditional steel and concrete pipe, the plastic pipe has big advantages， such as anti-corrosive, less leakage, light weight and easy installation. But the serious disadvantage of the plastic pipe is the low elastic modulus, e.g. polyethylene Ep value is about 800 Mpa. This character makes the full plastic pipe can not provide a high ring stiffness easily. Or, even we can approach to the high ring stiffness by increasing the wall thickness and material grade, but the expensive pipe cost is not acceptable by most of end users. So before the developing of the reinforced structure wall pipe, the full plastic pipe is mainly used in the area of small and middle diameter ranges.
1) High ring stiffness
For normal buried sewage plastic structure wall pipe, its maximum ring stiffness is difficult to over SN 8. But in new pipe, stiffness can easily reach the surprisingly value of SN 8, SN 12.5 and SN 16, even higher if necessary. In other hand, thanks to plastic properties, the plastic-steel-plastic composite structure could against corrosion very well.
2) Saving Material Cost
Besides the enhanced performance, the other primary advantage is that the new pipe can save material cost obviously. When pipe diameter is over Dn1000, SRPCP can save the plastic materials consumption nearly in 50% when compared with other plastic sewage pipe in same stiffness.
DN 300 - DN 2500
Stiffness SN 8, SN 12.5, SN 16
Pipe weight reduce 25-50%
Material cost reduce 30%
Compared with the traditional steel and concrete pipe, the plastic pipe has big advantages， such as anti-corrosive, less leakage, light weight and easy installation. But the serious disadvantage of the plastic pipe is the low elastic modulus, e.g. polyethylene Ep value is about 800 Mpa. This character makes the full plastic pipe can not provide a high ring stiffness easily. Or, even we can approach to the high ring stiffness by increasing the wall thickness and material grade, but the expensive pipe cost is not acceptable by most of end users. So before the developing of the reinforced structure wall pipe, the full plastic pipe is mainly used in the area of small and middle diameter ranges.
1) High ring stiffness
For normal buried sewage plastic structure wall pipe, its maximum ring stiffness is difficult to over SN 8. But in new pipe, stiffness can easily reach the surprisingly value of SN 8, SN 12.5 and SN 16, even higher if necessary. In other hand, thanks to plastic properties, the plastic-steel-plastic composite structure could against corrosion very well.
2) Saving Material Cost
Besides the enhanced performance, the other primary advantage is that the new pipe can save material cost obviously. When pipe diameter is over Dn1000, SRPCP can save the plastic materials consumption nearly in 50% when compared with other plastic sewage pipe in same stiffness.
Composite pipe extrusion line / for steel wire reinforced polyethylene pipes / SRTP - DN 50-1000
Steel reinforced HDPE pipe extruder
DN 50-DN 1000
Save 30-50% wall thickness
Save 30% material cost
Provide...
DN 50-DN 1000
Save 30-50% wall thickness
Save 30% material cost
Provide...
Composite pipe extrusion line / for steel wire reinforced polyethylene pipes / SRTP - DN 50-1000
Steel reinforced HDPE pipe extruder
DN 50-DN 1000
Save 30-50% wall thickness
Save 30% material cost
Provide higher pressure than solid wall HDPE pipe
Steel wire reinforced polyethylene composite pipe (SRTP Pipe) is an innovative pipe system developed by Goldstone independently. The polyethylene pipe has been reinforced by wrapping the high strength steel wire in the middle layer of the pipe. It results the pipe working pressure could easily reach 5 Mpa (diameter < D110), 3 Mpa (diameter < D200), and 2Mpa (diameter < D700).
DN 50-DN 1000
Save 30-50% wall thickness
Save 30% material cost
Provide higher pressure than solid wall HDPE pipe
Steel wire reinforced polyethylene composite pipe (SRTP Pipe) is an innovative pipe system developed by Goldstone independently. The polyethylene pipe has been reinforced by wrapping the high strength steel wire in the middle layer of the pipe. It results the pipe working pressure could easily reach 5 Mpa (diameter < D110), 3 Mpa (diameter < D200), and 2Mpa (diameter < D700).
Fiberglass-reinforced pipe extrusion line / for composite pipe - PP-R
Fiberglass Composite PP-R Pipe Extrusion Line"is an extension of the traditional PP-R pipe, which is reinforced by short fiberglass in medium layer of the pipe.To overcome the rigidity disadvantage of the PP-R pipe, Goldstone has innovated a new sandwich structrue.
The inner and outer layer is normal PP-R, short fiberglass...
The inner and outer layer is normal PP-R, short fiberglass...
Fiberglass-reinforced pipe extrusion line / for composite pipe - PP-R
Fiberglass Composite PP-R Pipe Extrusion Line"is an extension of the traditional PP-R pipe, which is reinforced by short fiberglass in medium layer of the pipe.To overcome the rigidity disadvantage of the PP-R pipe, Goldstone has innovated a new sandwich structrue.
The inner and outer layer is normal PP-R, short fiberglass is combined in the middle to be the strengthening layer.The pipe is made by a co-extrusion system composed of four extruders, three of them for pipe, one for marking line. The uniquely designed spiral co-extrusion die could allocate the fiberglass regularly in the reinforced layer and bond the three layers into an integer.
The production line consists of four high efficient extruder and co-extrusion die. The pipe is three layers sanwich structure plus a standard marking strip with a special granulating extrusion line.
We innovated a patented spiral mould co-extrusion. The fiber is allocated according to the optimum angle, so the strength can be raised differently and proportionately in longitudinal direction and latitucinal direction.
It could be used as PE pipe production line after adjust.
Each of the three layers could be adjusted separately according to the designing of the structure to acquire a high quality and more economical product.
The inner and outer layer is normal PP-R, short fiberglass is combined in the middle to be the strengthening layer.The pipe is made by a co-extrusion system composed of four extruders, three of them for pipe, one for marking line. The uniquely designed spiral co-extrusion die could allocate the fiberglass regularly in the reinforced layer and bond the three layers into an integer.
The production line consists of four high efficient extruder and co-extrusion die. The pipe is three layers sanwich structure plus a standard marking strip with a special granulating extrusion line.
We innovated a patented spiral mould co-extrusion. The fiber is allocated according to the optimum angle, so the strength can be raised differently and proportionately in longitudinal direction and latitucinal direction.
It could be used as PE pipe production line after adjust.
Each of the three layers could be adjusted separately according to the designing of the structure to acquire a high quality and more economical product.