+7 (812) 645-08-06
Mixer-dispensers (resins)
select brand
Two-component mixer-dispenser / resin - A-Basic
In the moulded polyurethane sector there is an ever-growing demand for high-pressure metering machines which combine simplicity of management, high technical and quality standards, efficiency and reliability, with the need to...
Two-component mixer-dispenser / resin - A-Basic
In the moulded polyurethane sector there is an ever-growing demand for high-pressure metering machines which combine simplicity of management, high technical and quality standards, efficiency and reliability, with the need to keep investment costs low.
The "A-Basic" has designed and developed to meet the specific requirements of the end-users who intend to replace the low-pressure machines with a more modern and environmentally friendly technology, and need to combine simplicity of management, production capacity, high technical and quality standards, efficiency and reliability, by keeping investment costs low.
The “A-Basic” models are easily transported, requires less room for installation but above all necessitates no accessory wiring: in other words it can be considered a “Plug & Play” unit, immediately ready for production start-up.
The "A-Basic" has designed and developed to meet the specific requirements of the end-users who intend to replace the low-pressure machines with a more modern and environmentally friendly technology, and need to combine simplicity of management, production capacity, high technical and quality standards, efficiency and reliability, by keeping investment costs low.
The “A-Basic” models are easily transported, requires less room for installation but above all necessitates no accessory wiring: in other words it can be considered a “Plug & Play” unit, immediately ready for production start-up.
Two-component mixer-dispenser / resin - E-System
The Cannon high-pressure metering unit E-System brings a new dimension to the field of Epoxy resin processing. The benefits of high-pressure mixing technology have been appreciated for many years. Highly accurate metering pumps give consistent outputs and mixing pressures to produce high quality mouldings. The progress occurred both in the mechanical and electronic fields...
Two-component mixer-dispenser / resin - E-System
The Cannon high-pressure metering unit E-System brings a new dimension to the field of Epoxy resin processing. The benefits of high-pressure mixing technology have been appreciated for many years. Highly accurate metering pumps give consistent outputs and mixing pressures to produce high quality mouldings. The progress occurred both in the mechanical and electronic fields during the last years, ensures that the
E-System metering unit improves the efficiency and bring the main processing parameters under closer control.
The E-System machine is suitable for processing very high quantity of hardener and a smaller quantity of release agent in high pressure. As a matter of facts, precise metering of the low output is by means of a hydraulic plunger, driven by a dedicated hydraulic unit.
In particular, the release agent
hydraulic cylinder is positioned as close as possible to the mixing head. The flow transducer installed between the dosing plunger and the mixing head allows the best metering by a closed loop system. Also base and hardener are metered in a closed loop system.
Many advantages of the metering unit deserve to be highlighted:
Capacitive continuous level (for base and hardener materials) with four setting points: min/max alarm, start/stop filling. Accurate level controls are able to maintain a constant quantity of material in the tanks.
Rust-proof treatment of the pumps
E-System metering unit improves the efficiency and bring the main processing parameters under closer control.
The E-System machine is suitable for processing very high quantity of hardener and a smaller quantity of release agent in high pressure. As a matter of facts, precise metering of the low output is by means of a hydraulic plunger, driven by a dedicated hydraulic unit.
In particular, the release agent
hydraulic cylinder is positioned as close as possible to the mixing head. The flow transducer installed between the dosing plunger and the mixing head allows the best metering by a closed loop system. Also base and hardener are metered in a closed loop system.
Many advantages of the metering unit deserve to be highlighted:
Capacitive continuous level (for base and hardener materials) with four setting points: min/max alarm, start/stop filling. Accurate level controls are able to maintain a constant quantity of material in the tanks.
Rust-proof treatment of the pumps
Two-component mixer-dispenser / resin - max. 600 kg/min
Blocks of flexible, semi-rigid and rigid foam produced by discontinuous processes are used in insulation, furnishing and car industry sectors. Cannon delivers low or medium pressure machines with an output range...
Two-component mixer-dispenser / resin - max. 600 kg/min
Blocks of flexible, semi-rigid and rigid foam produced by discontinuous processes are used in insulation, furnishing and car industry sectors. Cannon delivers low or medium pressure machines with an output range from 200 to 600 kg/min. These machines are available with a wide range of optionals and solutions: close loop control of output and ratio, mixing head handling systems and possibility to process more components.
Typical applications for these machines are:
rigid low-density blocks for insulation
insulated “offshore” pipes with compact filled compounds (e.g. with glass micro-spheres)
rigid medium-density blocks that can be worked with machine tools to produce models
semi rigid, blocks for automotive headliners
flexible or viscoelastic foams for mattresses and pillows.
Typical applications for these machines are:
rigid low-density blocks for insulation
insulated “offshore” pipes with compact filled compounds (e.g. with glass micro-spheres)
rigid medium-density blocks that can be worked with machine tools to produce models
semi rigid, blocks for automotive headliners
flexible or viscoelastic foams for mattresses and pillows.
Two-component resin mixer-dispenser / with piston pump - max. 2 270 g/s | A-Compact
Manufactured by Cannon, the ''A-Compact" has been engineered to deliver a solution for the increasing...
Two-component resin mixer-dispenser / with piston pump - max. 2 270 g/s | A-Compact
Manufactured by Cannon, the ''A-Compact" has been engineered to deliver a solution for the increasing demand in the Polyurethane sector for high-pressure metering machines. Combining a simple management, high technical and quality standards, these models are ideal for solving production problems of small and medium-sized establishments. This cost-effective device delivers wide output range.
Two-component resin mixer-dispenser / with piston pump - 35 - 3 740 g/s | A-System
Cannon's policy revolves around flexibility and modularity. Cannon's continuous machine development and design programs have resulted in the "A-System" which applies modular concepts and guarantees maximum flexibility in machine configuration.
Cannon's...
Cannon's...
Two-component resin mixer-dispenser / with piston pump - 35 - 3 740 g/s | A-System
Cannon's policy revolves around flexibility and modularity. Cannon's continuous machine development and design programs have resulted in the "A-System" which applies modular concepts and guarantees maximum flexibility in machine configuration.
Cannon's high-pressure metering machines offer the right solution for numerous applications and customer requirements. Their tailored design is able to satisfy the most complex of production needs. The machine has an open frame design allowing for easier maintenance operations with full accessibility to all the parts.
Cannon's "A-System" is particularly ideal for the effortless interfacing of handling equipment, such as jigs, storage and premix units, carousels, automatic Cartesian and anthropomorphic robots. This results in complete turnkey production systems. Solutions for special applications are included in the "A-System" series, such as production processes based on hydrocarbon blowing agents, multi-component foaming lines and plants fitted with multiple mixing heads.
Cannon's high-pressure metering machines offer the right solution for numerous applications and customer requirements. Their tailored design is able to satisfy the most complex of production needs. The machine has an open frame design allowing for easier maintenance operations with full accessibility to all the parts.
Cannon's "A-System" is particularly ideal for the effortless interfacing of handling equipment, such as jigs, storage and premix units, carousels, automatic Cartesian and anthropomorphic robots. This results in complete turnkey production systems. Solutions for special applications are included in the "A-System" series, such as production processes based on hydrocarbon blowing agents, multi-component foaming lines and plants fitted with multiple mixing heads.
Two-component resin mixer-dispenser / static mixer - See Flo 7
The Continuous Flow 2-Component Meter-Mix-Dispense system offers precise volumetric metering of low to medium viscosity materials. The two component meter mix dispense system has an adjustable ratio and...
Two-component resin mixer-dispenser / static mixer - See Flo 7
The Continuous Flow 2-Component Meter-Mix-Dispense system offers precise volumetric metering of low to medium viscosity materials. The two component meter mix dispense system has an adjustable ratio and is recommended for the dispensing materials of a low to medium viscosity. Continuous, on demand or metered 'volumetric shots' of mixed materials is allowed by the double acting metering cylinders with no reload delay between parts.
This production proven machine is used to process many industrial parts. The SEE-FLO 7 has a legendary reputation for versatility and durability across a wide range of applications, including casting, encapsulating and potting. This is due to the air powered positive displacement meter pumps which have hard stop shot controls and disposable mixers.
This production proven machine is used to process many industrial parts. The SEE-FLO 7 has a legendary reputation for versatility and durability across a wide range of applications, including casting, encapsulating and potting. This is due to the air powered positive displacement meter pumps which have hard stop shot controls and disposable mixers.
Two-component resin mixer-dispenser / static mixer - See-Flo® 202
The See-Flo 202 Meter-Mix-Dispense System utilizes a compact meter design, with a remote PLC control and carbide valves. The...
Two-component resin mixer-dispenser / static mixer - See-Flo® 202
The See-Flo 202 Meter-Mix-Dispense System utilizes a compact meter design, with a remote PLC control and carbide valves. The system is ideal for use in semi-automatic and manual operations with on-ratio, two component substrates.
With an AirDraulic™ air powered air-over-oil drive, the system allow for steady and consistent flow rates without pulses, while the positive displacement metering pistons ensure controlled stroke lengths for accurate material shot or bead volumes.
With an AirDraulic™ air powered air-over-oil drive, the system allow for steady and consistent flow rates without pulses, while the positive displacement metering pistons ensure controlled stroke lengths for accurate material shot or bead volumes.
Two-component resin mixer-dispenser / static mixer - See-Flo® 387
The See-Flo 387 Bench Top Meter-Mix-Dispense System is optimized for bonding, potting, encapsulating, sealing and laboratory operations. It is ideal...
Two-component resin mixer-dispenser / static mixer - See-Flo® 387
The See-Flo 387 Bench Top Meter-Mix-Dispense System is optimized for bonding, potting, encapsulating, sealing and laboratory operations. It is ideal for use with high quantities of low viscosity, two component substrates.
With an AirDraulic™ air powered air-over-oil drive, the system allows for steady, consistent flow rates without pulses, while the positive displacement metering pistons ensure controlled stroke lengths for accurate material shot or bead volumes. This precision is also facilitated by the system's mechanical hard-stop capacity.
With an AirDraulic™ air powered air-over-oil drive, the system allows for steady, consistent flow rates without pulses, while the positive displacement metering pistons ensure controlled stroke lengths for accurate material shot or bead volumes. This precision is also facilitated by the system's mechanical hard-stop capacity.
Two-component resin mixer-dispenser / static mixer - See-Flo® 391
The See-Flo® 391 are carbide made valves and remote PLC control which is suitable for semi-automatic...
Two-component resin mixer-dispenser / static mixer - See-Flo® 391
The See-Flo® 391 are carbide made valves and remote PLC control which is suitable for semi-automatic...
Two-component resin mixer-dispenser - See-Flo 494
With a volume capacity of 9.4 cu. in and with a ratio of 1:1, the See-Flo 494 is truly a proven meter mix dispense system. It is used for sealing,...
Two-component resin mixer-dispenser - See-Flo 494
With a volume capacity of 9.4 cu. in and with a ratio of 1:1, the See-Flo 494 is truly a proven meter mix dispense system. It is used for sealing, bonding or potting applications that requires high volumes. It is also a trusted meter mix dispense system in applying uniform beads of two component structural bonding adhesives. It is AirDraulic driven giving a positive displacement of metering rods adhesive in proportions and at a constant rate. Meter and control panel can be on a common floor or portable cart mounted and can be supplied by pump or pressure tank fed.
Two-component resin mixer-dispenser - MicroPro
The MicroPro series of proportioners from Magnum Venus Plastech is made for applications that require accurate metering in a wide array of materials at very low...
Two-component resin mixer-dispenser - MicroPro
The MicroPro series of proportioners from Magnum Venus Plastech is made for applications that require accurate metering in a wide array of materials at very low flow rates. It is used to deal with various media such as epoxies, urethane, and silicone, and is utilized for spray, splatter, pour and RTM operations. It can also deal with a viscosity range from 20 to 40,000 cps, at flow rates that do not exceed 1.893 liters per minute. It may come with shot size preferences, or a hydraulic drive. Moreover, it may be available with a mold pressure guard, an auto level control and alarm, and a recirculation option. Exact ratios may also be set.