Consumable for composite processing

select brand


Diatex

Vacuum bagging film / for vacuum molding - PA205

PA205 HF is a carved bagging film for the vacuum moulding of composite pieces. Its...

Vacuum bagging film / for vacuum molding - PA205

PA205 HF is a carved bagging film for the vacuum moulding of composite pieces. Its 3D structure provides a perfect vacuum drainage and so allows to take out the bleeder for compaction or vacuum moulding combinated to our MP Microporous peel ply. PA205 HF is a green bagging film, it enables use less peripheral device.

Multilayer film / for vacuum molding - VACUOPLEX™, VACUOPEEL™

VACUOPEEL™ is a multilayer system (without adhesive or glue ) used in manufacturing processes for vacuum moulding...

Multilayer film / for vacuum molding - VACUOPLEX™, VACUOPEEL™

VACUOPEEL™ is a multilayer system (without adhesive or glue ) used in manufacturing processes for vacuum moulding of composite materials with techniques such as prepreg, wet lay-up, and thermoplastic.

VACUOPLEX™ and VACUOPEEL™ allow an exceptional economy of time at
each level of the process :

Purchase and storage department :only one product to manage.
Production department :only one product to prepare and apply.

Vacuum bagging film / for vacuum molding - max. 400 °C

Bagging films are recommended for the moulding of elaborate forms. Advantages : good mechanical and chemical resistance, important elongation rate, non porous, cost...

Vacuum bagging film / for vacuum molding - max. 400 °C

Bagging films are recommended for the moulding of elaborate forms. Advantages : good mechanical and chemical resistance, important elongation rate, non porous, cost effective. The most standard product for vacuum moulding is our polyamide bagging film PA205. Our new high performance bagging film PO180 with a 50 μ thickness helps to reduce wastes. You can also use our new eneration of high elasticity extruded advanced copolymer films. PO150XD2 or DIABAG have exceptional conformable characteristics, particularly when applied to awkward shapes with deep recesses or undercuts. It permits the moulding of complex forms, save time and wastes.

Release film / for vacuum molding - max. 260 °C

Belonging to the fluoropolymer family, these perforated...

Release film / for vacuum molding - max. 260 °C

Belonging to the fluoropolymer family, these perforated films have a very good chemical and thermal resistance.

Release with all resins.
Recommend for autoclave process.

Sewerage felt / for vacuum molding - max. 205 °C

Non woven breather and bleeder felts made of polyester fibres.
These are recommended for the moulding of elaborate forms.
The...

Sewerage felt / for vacuum molding - max. 205 °C

Non woven breather and bleeder felts made of polyester fibres.
These are recommended for the moulding of elaborate forms.
The...
Airtech Advanced Materials Group

Vacuum bagging film / for vacuum molding - Dahlar® Release Bag 125

Dahlar® Release Bag 125 is an economical film designed for both vacuum bagging and release applications.
Dahlar® Release Bag 125 can be used for cures up to 141 °C and...

Vacuum bagging film / for vacuum molding - Dahlar® Release Bag 125

Dahlar® Release Bag 125 is an economical film designed for both vacuum bagging and release applications.
Dahlar® Release Bag 125 can be used for cures up to 141 °C and...

Sewerage felt / for vacuum molding - Econoweave 44

Description

Econoweave® 44 is a recycled polyester breather for room temperature and elevated temperature...

Sewerage felt / for vacuum molding - Econoweave 44

Description

Econoweave® 44 is a recycled polyester breather for room temperature and elevated temperature...

Release film / for vacuum molding

This perforated release film provides excellent release from polyesters,...

Release film / for vacuum molding

This perforated release film provides excellent release from polyesters,...

Vacuum bagging film / for vacuum molding - GS 95

Description

GS 95 is a low temperature...

Vacuum bagging film / for vacuum molding - GS 95

Description

GS 95 is a low temperature...

Peel ply for vacuum molding

our tightest weave polyester peel ply when extra strength is needed.

Release ply fabrics are peel...

Peel ply for vacuum molding

our tightest weave polyester peel ply when extra strength is needed.

Release ply fabrics are peel plies, used to texture the surface of a composite laminate. The peel ply surface is helpful for secondary bonding or painting of the composite laminate. Release ply fabrics may reduce or eliminate the need for sanding or abrading. The fabric is scoured and heat set to remove most contaminates and reduce shrinkage.
Fibertex Nonwovens

Peel ply vacuum infusion - 0.6 mm | Compoflex™ 150


Description
Compoflex® 150 is a peel ply and release film, used to control flow rate and release consumables...

Peel ply vacuum infusion - 0.6 mm | Compoflex™ 150


Description
Compoflex® 150 is a peel ply and release film, used to control flow rate and release consumables...

Multilayer film / for vacuum molding - 1.9 mm | Compoflex™ 400

Description

Compoflex® 400 is a peel ply, release film and breather, used to control flow rate and release consumables from a composite laminate.

Compoflex®...

Multilayer film / for vacuum molding - 1.9 mm | Compoflex™ 400

Description

Compoflex® 400 is a peel ply, release film and breather, used to control flow rate and release consumables from a composite laminate.

Compoflex®...

Sewerage felt / vacuum infusion - PET | Breatex™

The Breatex products are nonwoven...

Sewerage felt / vacuum infusion - PET | Breatex™

The Breatex products are nonwoven polyester breather/bleeder fabrics that are sold in full pallets directly from the production line.
{{item.name}}