Casting: sand molding machines, sand core making machines

select brand


BMM WESTON

Sand molding machine vertical joint plane - 340 kg | CY

Special Features

Anvil Jolt
Turnover Draw
Manual Control
Simple Operation
Ease of Maintenance

Produced in a single size, the type CY Turnover Draw Machine is low cost, manually operated,...

Sand molding machine vertical joint plane - 340 kg | CY

Special Features

Anvil Jolt
Turnover Draw
Manual Control
Simple Operation
Ease of Maintenance

Produced in a single size, the type CY Turnover Draw Machine is low cost, manually operated, alternative to the larger and more sophisticated BT machines. The anvil jolt ensures even sand distribution into the deepest corners and pockets which, coupled with the squeeze, achieves a uniform hardness of mould. Capable of handling a wide range of flask sizes, an extended roller head can be provided to aid mould discharge onto gravity conveyor.

Technical Data

*Jolt capacity calculated at 90 psi (6.1 atu).

Air consumption per average cycle 17 ft 3 0.48m3 free air.

Guards

Standard guards with safety interlocks can be provided where local legislation makes guarding of such equipment mandatory.

For further information consult BMM Weston Guarding Brochure.

Sand molding machine vertical joint plane - 680 kg | BT5

Jolt Squeeze, Turnover Draw Moulding Machines

A simultaneous jolt squeeze turn over draw moulding machine supplied with tilting roller...

Sand molding machine vertical joint plane - 680 kg | BT5

Jolt Squeeze, Turnover Draw Moulding Machines

A simultaneous jolt squeeze turn over draw moulding machine supplied with tilting roller head for smooth mould transfer. Options include full peripheral safety guarding, Auto or Manual Controls. Typical applications include deep pocketed work in boxes up to 30" x 30" ideal for Manhole covers and frames.

Special Features:
-Combined Jolt Squeeze
-Turnover Draw
-Tilting Roll-out Head
-Auto/manual Pneumatic Control
-Operational Safety Guards
-Low Maintenance

Sand molding machine vertical joint plane - 1814 kg | BT7

A combined jolt squeeze roll-over draw moulding machine with similar features to the BT5 with an applied jolt load to the table of 1814...

Sand molding machine vertical joint plane - 1814 kg | BT7

A combined jolt squeeze roll-over draw moulding machine with similar features to the BT5 with an applied jolt load to the table of 1814 kg. Capable of producing difficult to strip moulds in boxes of up to 60” x 40”. Extremely useful in the production of large brake drums and other deep draw codded work.

Special Features:

Combined Jolt Squeeze
Turnover Draw
Tilting Roll-out Head
Auto/manual Pneumatic Control
Operational Safety Guards
Low Maintenance

Sand molding machine vertical joint plane - 340 kg | CT1

Jolt Squeeze Moulding Machine

A low cost option for foundries looking for a durable, reliable, simple to operate moulding machine to produce moulds of up to...

Sand molding machine vertical joint plane - 340 kg | CT1

Jolt Squeeze Moulding Machine

A low cost option for foundries looking for a durable, reliable, simple to operate moulding machine to produce moulds of up to...

Sand molding machine vertical joint plane - 680 kg | CT3

A larger version of the CT1 with powered swing arm and pneumatic controls, this machine has featured at the heart of many Automatic moulding...

Sand molding machine vertical joint plane - 680 kg | CT3

A larger version of the CT1 with powered swing arm and pneumatic controls, this machine has featured at the heart of many Automatic moulding plants producing up to 180 complete moulds per hour. Capable of Mould sizes up to 30” x 30 “ in a variety of applications.

Special Features:

Combined Jolt Squeeze
Accurate Draw
Low Maintenance
Operational Roller or Pin Lift Draw
Operational Safety Guards
Operation Pneumatic, Electrical or Microprocessor Control
Maximator GmbH

Gas injection controller

Gas Injection Control (GIC) - Cavity measuring kit

Type GIC/500/1

The process monitoring...

Gas injection controller

Gas Injection Control GIC
Process monitoring Type GIC/500

The process monitoring module is positioned between control module and mold. The introduced N2 volume and the recirculated N2 volume are exactly measured. Thus, the system is capable of detecting gas outbursts, injector impurities and mold leakages. This is the first device for operators to dertermine and monitor their gas consumptions.

- Process monitoring in conformity with DIN ISO 9000
- Monitoring of gas consumption
- Detection of mold leakages
- Cost reduction
- GOOD/BAD criteria via Interfaces
- also conditionable for multicavities

External core puller controller - serie HAG/160-210/12

The HAG/160-210/12 series is an external core puller controller developed by Maximator. It is...

External core puller controller - serie HAG/160-210/12

External Hydraulic Power Pack HAG

The MAXIMATOR-HAG hydraulic unit is designed for the supply of hydraulic driving mechanisms, as well as the actuation of cores, valve needles and retractable gas and water nozzles.

Application

The mobile core control is the ideal extension for all injection molding machines which do not have any core control. It is simple to install and operate. With it, movable units at the tool can be moved, such as for example injectors or hydraulic shutters.


HAG/160-210/(8; 12)
External Hydraulic Unit with PLC Control

The Maximator-HAG hydraulic unit controls up to 6 double-acting cylinders or cores in the mold. The connection with the injection molding machine is made over an interface. Limit switches in the tool are processed as a signal in the PLC, and ensure reliable operation.

- hydraulic pressure up to 210 bar
- 3 independent pressure circuits
- controls up to 6 double-acting cylinders or cores in the mold
- compatible with all injection molding machines
- cart-type, for individual applications
{{item.name}}