+7 (812) 645-08-06
Spray nozzles
select brand
Flat spray nozzle / spraying / rapid - HT series
With this complete range of flat fan jet nozzles,connected to the
specific...
specific...
Flat spray nozzle / spraying / rapid - HT series
With this complete range of flat fan jet nozzles,connected to the
specific sphere ZBA QQN1 D6 and suitable for any existing PNR plastic
swivel clamp, you can improve your machines design and reduce
maintenance time at a negligible cost.
Product data-sheet is available for further details.
specific sphere ZBA QQN1 D6 and suitable for any existing PNR plastic
swivel clamp, you can improve your machines design and reduce
maintenance time at a negligible cost.
Product data-sheet is available for further details.
Full-cone nozzle / spraying / compact / stainless steel - 0.5 - 10 bar | AA series
Orifice diameter : 3 mm - 14 mm
This selection of full cone pattern spray nozzles features offline full cone vaneless nozzles and full cone flange connections as well as full cone three-piece nozzles. There are nozzles with full cone square spray and large flow...
This selection of full cone pattern spray nozzles features offline full cone vaneless nozzles and full cone flange connections as well as full cone three-piece nozzles. There are nozzles with full cone square spray and large flow...
Full-cone nozzle / spraying / compact / stainless steel - 0.5 - 10 bar | AA series
This selection of full cone pattern spray nozzles features offline full cone vaneless nozzles and full cone flange connections as well as full cone three-piece nozzles. There are nozzles with full cone square spray and large flow square spray, full cone offline spray nozzles and full cone injector nozzles. The selection includes full cone nozzle tips and multiple full cone nozzles with standard spray angles and wide spray angles. It also includes full cone spiral nozzles and spiral nozzles with extra wide angles.
The flat jet pattern nozzles include flat jets with high-pressure washing nozzles, flat jets with standard flow rates, large flow rates and low flow rates. The flat jet tips come in standard flow or large flow, and the dovetail tips come in standard or large flow. The flat jet nozzles have large spray angles and high impact (spoon) nozzles. The selection also includes pencil jets.
The flat jet pattern nozzles include flat jets with high-pressure washing nozzles, flat jets with standard flow rates, large flow rates and low flow rates. The flat jet tips come in standard flow or large flow, and the dovetail tips come in standard or large flow. The flat jet nozzles have large spray angles and high impact (spoon) nozzles. The selection also includes pencil jets.
Full-cone nozzle / spraying / for low-pressure / high-flow - 0.25 - 0.5 bar | AE series
Orifice diameter : 12 mm - 42 mm
Select from a wide range of full cone nozzles, covering any possible requirements you may have for standard industrial processes.
A...
Select from a wide range of full cone nozzles, covering any possible requirements you may have for standard industrial processes.
A...
Full-cone nozzle / spraying / for low-pressure / high-flow - 0.25 - 0.5 bar | AE series
Select from a wide range of full cone nozzles, covering any possible requirements you may have for standard industrial processes.
A comprehensive table lists the full nozzle type codes, and next to each type are provided some general indications about nozzle style, spray pattern, special features, and specific applications.
Full cone nozzles are most typically made of brass or AISI 316 stainless steel, however a wide choice of other materials including Teflon, PVC, Polypropylene, Hastelloy, and Titanium can be available upon request.
A comprehensive table lists the full nozzle type codes, and next to each type are provided some general indications about nozzle style, spray pattern, special features, and specific applications.
Full cone nozzles are most typically made of brass or AISI 316 stainless steel, however a wide choice of other materials including Teflon, PVC, Polypropylene, Hastelloy, and Titanium can be available upon request.
Full-cone nozzle / spraying / threaded / stainless steel - 0.25 - 5 bar | AL series
Orifice diameter : 8.7 mm - 28.5 mm
Full cone nozzles AL from PNR are made of one piece and produce a full cone round-shaped spray area. They generate the round pattern at various standard angle ranges...
Full cone nozzles AL from PNR are made of one piece and produce a full cone round-shaped spray area. They generate the round pattern at various standard angle ranges...
Full-cone nozzle / spraying / threaded / stainless steel - 0.25 - 5 bar | AL series
Full cone nozzles AL from PNR are made of one piece and produce a full cone round-shaped spray area. They generate the round pattern at various standard angle ranges and are capable of spraying at a rate of 20.8 and 714 litres per minute.
AL nozzles feature a one-piece, S-vane design that delivers efficient performance with a wide spray area coverage and clogging resistance, making them the most widely-accepted nozzles for spraying purposes. The design offers a large free passage and is capable of dealing with contaminants found in dirt water supplies. AL nozzles are available in AISI 316L stainless steel or any other alloy.
AL nozzles feature a one-piece, S-vane design that delivers efficient performance with a wide spray area coverage and clogging resistance, making them the most widely-accepted nozzles for spraying purposes. The design offers a large free passage and is capable of dealing with contaminants found in dirt water supplies. AL nozzles are available in AISI 316L stainless steel or any other alloy.
Full-cone nozzle / spraying / stainless steel - 1 - 7 bar | AT series
Orifice diameter : 2.2 mm - 14 mm
PNR vaneless - off line nozzles create a full cone spray without the presence of any vane inside the whirl-chamber. The spray pattern...
PNR vaneless - off line nozzles create a full cone spray without the presence of any vane inside the whirl-chamber. The spray pattern...
Full-cone nozzle / spraying / stainless steel - 1 - 7 bar | AT series
PNR vaneless - off line nozzles create a full cone spray without the presence of any vane inside the whirl-chamber. The spray pattern is tangential to the nozzle feed inlet's axis.
Clogging is minimized due to the vacant internal passages. In addition, coarse droplets uniformly distributed across the spray area are produced by the nozzles. This leads to a stable spray angle across a broad range of inlet pressure values. The coarse droplets also provide high resistance to wind drift.
Clogging is minimized due to the vacant internal passages. In addition, coarse droplets uniformly distributed across the spray area are produced by the nozzles. This leads to a stable spray angle across a broad range of inlet pressure values. The coarse droplets also provide high resistance to wind drift.
Nozzle
Lee offers a wide range of nozzles capable of providing either a precise droplet or atomized fluid. Several mounting styles allow these nozzles...
Nozzle
Lee offers a wide range of nozzles capable of providing either a precise droplet or atomized fluid. Several mounting styles allow these nozzles to be incorporated directly onto our VHS dispensing valves, or to be connected to valves using soft flexible tubing.
Dispense nozzles are available in straight tubes or with jeweled orifices (allowing tighter droplet control).
Mounting styles include:
062 MINSTAC
062 MINSTAC w/ HEX nut
Straight tube for use with soft tubing
Atomizing Nozzles
Dispense nozzles are available in straight tubes or with jeweled orifices (allowing tighter droplet control).
Mounting styles include:
062 MINSTAC
062 MINSTAC w/ HEX nut
Straight tube for use with soft tubing
Atomizing Nozzles
Pneumatic atomizing nozzle - 20 psi
The Lee Company makes many atomizing nozzles in air-assisted and airless forms to create a 50-degree hollow cone spray pattern so that atomization is easy to manage.
This...
This...
Pneumatic atomizing nozzle - 20 psi
The Lee Company makes many atomizing nozzles in air-assisted and airless forms to create a 50-degree hollow cone spray pattern so that atomization is easy to manage.
This unit works without an outside air supply and with a 20 psi setup. It has a stainless steel body with 6-40 threads to work with the Lee 062 Minstac system, and functions well in multiple flow ranges with different controls and a good micro-dispense valve.
The unit has an external air source for atomization and a lower fluid operating pressure. It can be controlled to adjust the flow rate as needed. The atomizing nozzles are also made with wetted materials and can be designed with specific requests in mind.
This unit works without an outside air supply and with a 20 psi setup. It has a stainless steel body with 6-40 threads to work with the Lee 062 Minstac system, and functions well in multiple flow ranges with different controls and a good micro-dispense valve.
The unit has an external air source for atomization and a lower fluid operating pressure. It can be controlled to adjust the flow rate as needed. The atomizing nozzles are also made with wetted materials and can be designed with specific requests in mind.
