+7 (812) 645-08-06
Machine safety devices
select brand
Enabling switch - PITenable
PITenable three stage enabling switches are manually operated control devices for use when working in the danger zone of a machine or when safety equipment has been...
Enabling switch - PITenable
PITenable three stage enabling switches are manually operated control devices for use when working in the danger zone of a machine or when safety equipment has been disabled, generally during maintenance or setup. When used in stage 1 the switch is off, and the machine operates with safety functions. In stage 2 the switch is placed in its middle setting, and the machine functions while the movable guard safety functions are suspended. When stage 3 is active, the machine immediately stops if the switch is either fully pressed or suddenly released. This third stage provides protection to the operator in the danger zone if he is startled or shocked.
Enabling switch - PITjog
The Pilz's PITjog is a manually controlled jog switch which can be utilized when a work is being transferred out in...
Enabling switch - PITjog
The Pilz's PITjog is a manually controlled jog switch which can be utilized when a work is being transferred out in a plant or in a machine's hazard section. It requires a two-handed type of operation. This device can be used with the integration of the two-hand module which comes from the standardized safety relay PNOZmulti. It can ideally be accompanied by a various types of accessories like the PITsign 5W replacement bulb and the PITsign replacement bulb.
Interlock device safety - PSENbolt
PSENbolt together with PSEN safety switches are designed to ensure optimum protection...
Interlock device safety - PSENbolt
PSENbolt together with PSEN safety switches are designed to ensure optimum protection and safety measures for integrated automation solutions. These products can be used for hard to adjust gates as well as in the event where gates are usually opened and closed. PSENbolt ensures lasting service lifespan and simple operation.
Operating mode selector switch - PITmode
PITmode is an operating mode selector switch designed to perform dual action in a single compact device. It is responsible for selecting...
Operating mode selector switch - PITmode
PITmode is an operating mode selector switch designed to perform dual action in a single compact device. It is responsible for selecting the operating mode and authorization control for machine entry. This device can also be utilized on plants and machinery where various control sequences and operating modes are being adapted.
Through integrating PITmode with Pilz control solutions (e.g PNOZmulti), it can provide a cost-effective solution in operating mode selection, and controlling access authorizations.
Through integrating PITmode with Pilz control solutions (e.g PNOZmulti), it can provide a cost-effective solution in operating mode selection, and controlling access authorizations.
Safety locking device - Cat. 4/PL e, 24 V, IP65
The ABB Knox safety lock is a double lock that adheres with the highest safety level that can be utilized as a safety and process lock. It features two...
Safety locking device - Cat. 4/PL e, 24 V, IP65
The ABB Knox safety lock is a double lock that adheres with the highest safety level that can be utilized as a safety and process lock. It features two lock cylinders with monitored positions. Its locking mechanism is electronically controlled and maintains its unlocked or locked position in the occurrence of a power outage. Its handles have a simple design. The exterior handle has a reset function and an interior handle that is designed for emergency opening. Its robust design makes it suitable in unfavorable conditions. Its sensors are non-contact and the lock is constructed out of stainless steel.
Safety handle three-position
The JSHD4 Three position device permits an operator be issue an emergency stop signal under extreme circumstances. The device can respond to increased pressure or to complete release....
Safety handle three-position
The JSHD4 Three position device permits an operator be issue an emergency stop signal under extreme circumstances. The device can respond to increased pressure or to complete release. Three position devices are ideal for use in trouble shooting, programming or testing when other safety precautions are not available or are inadvisable. When an operator is required to work in a high risk area to test or trouble shoot equipment, they must be provided with a means of immediately stopping the machine that does not require reliance on another operator to implement a stop. Additionally, no other operator should be able to unknowingly start the machinery once it has been stopped using the three position unit.
Pressure-sensitive safety mat - -20 - 60 °C, IP67
The ABB Safety Mat is utilized as personal protection within the hazardous working spaces around presses, robots, production lines, machines etc. Upon stepping onto the mat,...
Pressure-sensitive safety mat - -20 - 60 °C, IP67
The ABB Safety Mat is utilized as personal protection within the hazardous working spaces around presses, robots, production lines, machines etc. Upon stepping onto the mat, the connected monitoring system will abruptly detect it and halt all dangerous machine movements. This is made possible by the detection of electrical contacts closing within the sandwich construction of the Mat. The mat consists of a bottom plate of either synthetic material or metal to accommodate the load it will be bearing. It also comes with a ribbed surface, which is secured by adhesive to the surface of the Safety Mat. These safety mats are available in different sizes with or without built-in ramp edge trim.
Solenoid interlock - AZM 161 series
This product can be fitted with up to 6 contacts, long battery life, is double insulated with a thermoplastic enclosure, and has added protection against incorrect locking.The unit measures 130mmx90mmx30mm.
Solenoid interlock - AZM 190 series
This device is designed with Interlock, for protection against incorrect locking in...
Solenoid interlock - AZM 190 series
This device is designed with Interlock, for protection against incorrect locking in thermoplastic enclosures. Has 2 M 20x1.5 cable entries and a wiring compartment going along with its slim design. Ideal for aluminium profiles and fencing. Cut clamp termination and sealing mechanism preventing dirt. Volumes 89mm x 178mm x 41mm.
Solenoid interlock - AZM300 series
The AZM300 is a manual release, series-wiring solenoid interlock that is ideal for hinged,...
Solenoid interlock - AZM300 series
The AZM300 is a manual release, series-wiring solenoid interlock that is ideal for hinged, sliding guards and for mounting to profile systems. It has a compact design with thermoplastic enclosure. It allows 3 different actuation directions and functions on an electronic, contact-free, coded system with 2 LED showing operating conditions.
Solenoid interlock - AZM 170 series
This thermoplastic enclosed device proves to have high holding force with a double...
Solenoid interlock - AZM 170 series
This thermoplastic enclosed device proves to have high holding force with a double insulated compact design in a measured 90 mm x 84 mm x 30 mm product volume. Additionally features an interlock with a very versatile protection against incorrect locking. Thus proves efficiency and cost reliability for quality performance.
Solenoid interlock - AZM 200 series
This product has intelligent diagnosis with manual release. Its sensor technology allows...
Solenoid interlock - AZM 200 series
This product has intelligent diagnosis with manual release. Its sensor technology allows...