+7 (812) 645-08-06
Power supply transformers, instrument transformers...
select brand
Sizing transformer / current - 100 - 800 A |CTW Series
Clamp on current transformers are instrumental in saving installation costs and while upgrading the existing systems because they are far easier to install when compared to conventional...
Sizing transformer / current - 100 - 800 A |CTW Series
Clamp on current transformers are instrumental in saving installation costs and while upgrading the existing systems because they are far easier to install when compared to conventional ones. Their efficiency also makes it easier to attach it to a cable, making updating easier. There are standard models with their current vale and rating burden and compact and lightweight models with their current value and rating burden: The standard models details are CTW10: 100 A/1 Arms 50/60 Hz, 0.5 VA and CTW20: 200 A/1 Arms 50/60 Hz, 0.5 VA, while the compact ones are CTW15: 100 A/1 Arms 50/60 Hz 0.3 VA and CTW35: 300 A/1 Arms 50/60 Hz, 0.5 VA. The standard models also include 500 A and 800 A models.
Control transformer / power - 1 - 10 kVA | SolaHD HSZ series
The HSZ Series transformers were designed...
Control transformer / power - 1 - 10 kVA | SolaHD HSZ series
The HSZ Series transformers were designed for industrial applications that required specific types of mountings. These transformers come in ratings from 1 through 10kVA.
Control transformer - max. 1 kVA | SolaHD SBE series
The SBE encapsulated industrial control transformers are able to seal the transformer windings against dirt,...
Control transformer - max. 1 kVA | SolaHD SBE series
The SBE encapsulated industrial control transformers are able to seal the transformer windings against dirt, moisture and industrial contaminants as they are epoxy encapsulated. The possibility of electrical failure due to frayed lead wires or arcing is reduced by the extra deep, molded terminal barriers. The design of the SBE is ideally suited to industrial environments, with its rugged construction and its proven reliability.
Control transformer - 1 - 5 kVA | SolaHD SMT series
The SMT Series is compact and economical. It has a traditional open-wound design with varnished...
Control transformer - 1 - 5 kVA | SolaHD SMT series
The SMT Series is compact and economical. It has a traditional open-wound design with varnished...
Isolation transformer / dry - 7.5 - 440 kVA | SolaHD
It has been the duty of Drive Isolation technologies to make sure that each electronic equipment being used are performing perfectly and will last for years....
Isolation transformer / dry - 7.5 - 440 kVA | SolaHD
It has been the duty of Drive Isolation technologies to make sure that each electronic equipment being used are performing perfectly and will last for years. Among the best that SolaHD can offer to customers is the DIN rail mounted line reactors which supplies sufficient protection against negative effects of current brought about harmonics, capacitor as well as load switching, drive crosstalking and also input line distortion. Designed to safeguard the SCR drives, the drive isolation transformers of SolaHD works by isolating any forthcoming line from the drive at the same time with pairing the desired voltage.
Electrical power supply transformer - 0.05 - 7.5 kVA, 12 - 48 V | SolaHD Buck-Boost
You are looking at transformers that are energy efficient and, in addition to this, are able to provide low cost means of operation and installation, which...
Electrical power supply transformer - 0.05 - 7.5 kVA, 12 - 48 V | SolaHD Buck-Boost
You are looking at transformers that are energy efficient and, in addition to this, are able to provide low cost means of operation and installation, which makes them suitable for most users, regardless of the nature of applications they want to consider.
The high-quality, buck-boost transformer is able to maximize the connected equipment's life and the overall performance of the device. In addition, you may also wish to know that these devices are capable of functioning as auto-transformers, so you don't have to put too much effort into the maintenance or the operation of this device.
The high-quality, buck-boost transformer is able to maximize the connected equipment's life and the overall performance of the device. In addition, you may also wish to know that these devices are capable of functioning as auto-transformers, so you don't have to put too much effort into the maintenance or the operation of this device.
Sizing transformer / current - max. 4 kA, 36 - 800 kV | IMB
With more than 60 years of ABB experience, IMB oil-minimum current transformers are the best selling worldwide. These transformers are based on a tank type (hairpin) design....
Sizing transformer / current - max. 4 kA, 36 - 800 kV | IMB
With more than 60 years of ABB experience, IMB oil-minimum current transformers are the best selling worldwide. These transformers are based on a tank type (hairpin) design. With more than 160,000 units delivered and installed around the world, from desert and arctic climates, these current transformers are reliable, with service records indicating failure rates of up to four times lower than average. ABB designs current transformers to customer specifications and requirements. Voltages range from 36 to 800kV, and designs utilize varied tanks sizes, expansion systems, primary windings, etc. Porcelain or silicon rubber insulators are used for the IMB current transformers.