Resistors

select brand


Frizlen GmbH & Co. KG

Energy-dissipation resistor / compact - S318A

FRIZLEN widens product portfolio with steel-grid resistors for high energy absorption in compact design

The newly developed resistors made of 3 mm steel sheets enable high short time energy absorption in much smaller form of construction....

Energy-dissipation resistor / compact - S318A

FRIZLEN widens product portfolio with steel-grid resistors for high energy absorption in compact design

The newly developed resistors made of 3 mm steel sheets enable high short time energy absorption in much smaller form of construction. The product enables customers to save on space and it is easily integrated into switch cabinets. The new steel-grid resistors are designed for high energy applications in wind energy or drive technology to dissipate peak currents.

Murr. FRIZLEN launches its popular steel-grid resistors in a new compact form of construction, which requires less space at the same high short time energy absorption. Made of 3 mm instead of 1 mm steel sheets the resistors allow a 2.5 times higher energy absorption.
Thanks to a new geometry of the resistor elements we build compact blocks of several elements that will only take about 25% of the previous space at the same energy absorption capacity.

Power resistor / wire-wound - 12 - 1 000 W, IP 00 | FZ, FU series

The FZ/FU series of cemented and uncemented wirewound tubular fixed resistors are designed according to IP00...

Power resistor / wire-wound - 12 - 1 000 W, IP 00 | FZ, FU series

The FZ/FU series of cemented and uncemented wirewound tubular fixed resistors are designed according to IP00 protection standard and use a flexible direct connection on the resistor including screw clips, fast-on and soldering, based on the construction size. These models are available with adjustable clips (Ags.) and are often employed as a ballast, limiting, filter or series resistor, in various constructions and user developments.

Power resistor / wire-wound - 12 - 1 000 W, IP 00 | FZB, FUB series

FZB and FUB series fixed resistor cylinder comprises two distinct models of cemented and non-cemented construction, with...

Power resistor / wire-wound - 12 - 1 000 W, IP 00 | FZB, FUB series

FZB and FUB series fixed resistor cylinder comprises two distinct models of cemented and non-cemented construction, with protective accreditation from IP00. It is fitted with a threaded rod, allowing vertical installation to mounting surfaces. This resistor permits direct connection within its system, and enables escalation at the switch cabinets.

Different connections can be wired at the soldering area, and fast-on or screw clips can also be integrated.

Power resistor / wire-wound - 12 - 250 W, IP 00 | FZS, FUS series

Frizlen Power Resistors Type series FZS / FUS is equipped with a cemented wire wound tubular fixes...

Power resistor / wire-wound - 12 - 250 W, IP 00 | FZS, FUS series

Frizlen Power Resistors Type series FZS / FUS is equipped with a cemented wire wound tubular fixes resistors. It has a degree of protection IPOO wherein it is insertable of a fastening brackets which are enclosed loose. This product can be directly connected to the resistor and has adjustable clips. Type series FZS / FUS is optional to be used, depending on the connections.

Power resistor / ceramic - 12 - 300 W, IP 00 | FZW, FUW series

Frizlen's FZW/FUW Series are cemented wirewound tubular fixed resistors that feature screwed fastening...

Power resistor / ceramic - 12 - 300 W, IP 00 | FZW, FUW series

Frizlen's FZW/FUW Series are cemented wirewound tubular fixed resistors that feature screwed fastening brackets, and an ingress protection rate of IP00. The resistors receive direct connections, such as screw fast-on, or soldering connections (all available upon request). They allow integration into switch cabinets, and feature modifiable clips (also available upon request).
Littelfuse

LED protector - 350 mA, 3 V | PLED series

The LED protectors in the PLED series provide a switching electronic shunt path in situations when a single LED in an array of LEDs fails as an open circuit. This ensures the proper functioning of the entire LED array,...

LED protector - 350 mA, 3 V | PLED series

The LED protectors in the PLED series provide a switching electronic shunt path in situations when a single LED in an array of LEDs fails as an open circuit. This ensures the proper functioning of the entire LED array, which will continue even if a single LED does not operate normally. The reliable lightning functions are provided in applications such as aircraft, aircraft runway lightning, headlights and numerous others.

The device is also compatible with 1W LEDs that have a normal 350mA, as well as a 3V characteristic. This can be extended to up to 1,000mA LED applications however, while the PLED series is available in two surface mount packages. The item is also ideal for dense board applications, such as chip scale package, small footprint and others. Finally, customers can also use it with industrial lighting environments and switching equipment.

LED protector - 5.5 - 7.5 V | PLED6M series

PLED6M Series from Little fuse offers an electronic shunt path as a solution for the failure of LED string and LED as an open circuit. The entire range of the LEDs stays illuminated even at the failure of a single string. The PLED6M...

LED protector - 5.5 - 7.5 V | PLED6M series

PLED6M Series from Little fuse offers an electronic shunt path as a solution for the failure of LED string and LED as an open circuit. The entire range of the LEDs stays illuminated even at the failure of a single string. The PLED6M...
KINTO ELECTRIC CO., LTD.

Shunt flat-wire braid - 100 - 1 200 mm², 480 - 2 150 A

KINTO are one of the leading suppliers of manufactured copper parts for electrical applications in China, and are renowned for their excellent quality and economical pricing. KINTO utilize a range of technologies to manufacture their products,...

Shunt flat-wire braid - 100 - 1 200 mm², 480 - 2 150 A

KINTO are one of the leading suppliers of manufactured copper parts for electrical applications in China, and are renowned for their excellent quality and economical pricing. KINTO utilize a range of technologies to manufacture their products, including press/diffusion welding, braze welding, cold-pressing, stamping, deep-drawing and high-precision machining, and the company is ISO9001 certified with a commitment to producing the utmost quality.

KINTO's product range includes copper flexible connectors manufactured from copper strips, copper flexible strips manufactured from braided tapes/stranded ropes, flexible insulated busbars, primary copper contacts, primary copper connectors and copper clamps, as well as other custom copper parts. The contact areas of the components can zinned or silver-coated to meet specific customer requirements, and buyers will be impressed with the efficiency and reliability of these products.

Shunt flat-wire braid

These are flat wire braid shunt by Kinto which are adjustable connectors made with copper...

Shunt flat-wire braid

These are flat wire braid shunt by Kinto which are adjustable connectors made with copper having a brazed or cold pressed terminals. The components are ≥99.9%. made of copper which have a diameter of 0.15mm to 0.20mm as per standard and 0.05mm to 0.10mm for customized version. The surface can be treated with or without plating such as silver and tin.
{{item.name}}