+7 (812) 645-08-06
Heatsinks
select brand
Heat sink with aluminum frame
This one of a kind equipment is known for its flexibility to the needs of...
Heat sink with aluminum frame
This one of a kind equipment is known for its flexibility to the needs of the consumers. What made this equipment stand out is the cooling elements as front or rear panel in the 19-inch technology. Best of all, customized versions of this highly innovative equipment are available upon request.
Thermally conductive gap filler - THERM-A-GAP™ T630 Series
Gap Fillers from Chomerics are fully cured, thermally conductive, Bellcore-passed silicon chemical fillers that fill uneven or irregular gaps in electronic assemblies. This is...
Thermally conductive gap filler - THERM-A-GAP™ T630 Series
Gap Fillers from Chomerics are fully cured, thermally conductive, Bellcore-passed silicon chemical fillers that fill uneven or irregular gaps in electronic assemblies. This is a successful and convenient alternative to conventional filling pads that cause additional tension on electronic components, solder joints and leads, which cause mechanical shear of the circuit board.
Gap filler is a viscoplastic paste that is fully cured and form stable with which negligible force is required to deform during electronic assembly. For applications requiring electrical isolation, compression stop filling can be achieved by using the "G" version of gap fillers that has glass beads.
Gap filler is a viscoplastic paste that is fully cured and form stable with which negligible force is required to deform during electronic assembly. For applications requiring electrical isolation, compression stop filling can be achieved by using the "G" version of gap fillers that has glass beads.
Heat spreader
Looking for low-cost yet effective cooling IC devices to be used in controlled environments? The T-Wing® and C-Wing Heat Spreaders are the ultimate solutions to your cooling dilemmas. Highly effective even in...
Heat spreader
Looking for low-cost yet effective cooling IC devices to be used in controlled environments? The T-Wing® and C-Wing Heat Spreaders are the ultimate solutions to your cooling dilemmas. Highly effective even in...
Thermally conductive gap filler - THERM-A-GAP™ 500 Series
Chomerics THERM-A-GAP™ 569, 570, 579 and 580 materials deliver improved thermal performance and conformability when compared to earlier gap fillers.
All materials come on...
All materials come on...
Thermally conductive gap filler - THERM-A-GAP™ 500 Series
Chomerics THERM-A-GAP™ 569, 570, 579 and 580 materials deliver improved thermal performance and conformability when compared to earlier gap fillers.
All materials come on an aluminum foil (A) or “clean break” glass (G) fiber carriers and can be permanently attached to cold surfaces thanks to the proven high strength acrylic pressure sensitive adhesive. These thermally conductive interface pads are intended for insertion between heat sinks and heat generating parts. G974 material has a thermal conductivity of 4.0 W/m-K and can mold to surface irregularities in order to fill the potential air gaps, enabling improved heat transmission.
The thickness of the available pads is from 0.010" to 0.060".
All materials come on an aluminum foil (A) or “clean break” glass (G) fiber carriers and can be permanently attached to cold surfaces thanks to the proven high strength acrylic pressure sensitive adhesive. These thermally conductive interface pads are intended for insertion between heat sinks and heat generating parts. G974 material has a thermal conductivity of 4.0 W/m-K and can mold to surface irregularities in order to fill the potential air gaps, enabling improved heat transmission.
The thickness of the available pads is from 0.010" to 0.060".
Thermal conductor film / silicone - 0.2 - 0.25 mm, 1.6 W/m-K | 5514
3M™ Thermally Conductive Silicone Interface Pad 5514 is a tacky, highly conformable silicone elastomer sheet. Designed to provide heat transfer...
Thermal conductor film / silicone - 0.2 - 0.25 mm, 1.6 W/m-K | 5514
3M™ Thermally Conductive Silicone Interface Pad 5514 is a tacky, highly conformable silicone elastomer sheet. Designed to provide heat transfer path between heat generating components and heat sinks, heat spreaders and other cooling devices.
Features and Benefits
Good thermal conductivity (1.6 W/m-K)
Hardness : Shore 00 = 58
Good dielectric properties
UL 94 V-0
High temperature resistance
Good converting for complicated shape
Good flexibility with over bending
Thin thickness, 0.2 mm 0.25 mm
Roll is available
Features and Benefits
Good thermal conductivity (1.6 W/m-K)
Hardness : Shore 00 = 58
Good dielectric properties
UL 94 V-0
High temperature resistance
Good converting for complicated shape
Good flexibility with over bending
Thin thickness, 0.2 mm 0.25 mm
Roll is available
Thermal conductor film / silicone - 0.5 - 2 mm, 1.6 W/m-K | 5595S
The 3M™ Thermally Conductive Silicone Interface Pad 5595S is a soft, silicone elastomer with thermal conductivity of 1.6 W/m-K. This product is conformable at low pressure so stress on components...
Thermal conductor film / silicone - 0.5 - 2 mm, 1.6 W/m-K | 5595S
The 3M™ Thermally Conductive Silicone Interface Pad 5595S is a soft, silicone elastomer with thermal conductivity of 1.6 W/m-K. This product is conformable at low pressure so stress on components...