Attenuators, phase shifters, delay lines...

select brand


Rohde Schwarz

Attenuator RF - max. 67 GHz | R&S®RSC series

R&S®RSC step attenuator is used when precise signal levels are critical to setup. These attenuators...

Attenuator RF - max. 67 GHz | R&S®RSC series

R&S®RSC step attenuator is used when precise signal levels are critical to setup. These attenuators...
LEUKOS

Delay line

Leukos FDL large stroke optical delay line is designed with all-fiber setup, delivering reliable...

Delay line

Leukos FDL large stroke optical delay line is designed with all-fiber setup, delivering reliable performance with minimal insertion loss. It enables optical delay higher than 900 ps at 30 cm corresponding air path. Its wavelength range is approximated at 450 to 1700 nm. This delay line series uses single-mode, polarization-maintaining and multi-mode fiber.
Pasternack Enterprises, Inc.

Attenuator variable - Continuously Variable Attenuator

Pasternack continuously variable attenuators have impedance of 50 Ohm. This series is provided with SMA connectors. These continuously variable attenuators have RF dB...

Attenuator variable - Continuously Variable Attenuator

Pasternack continuously variable attenuators have impedance of 50 Ohm. This series is provided with SMA connectors. These continuously variable attenuators have RF dB attenuation values in the range of 7 dB to 40 dB. Their frequency range is between 1 GHz to 18 GHz. The product line comprises of low as well as medium power attenuators with up to 5 watts of power handling capacity.

Based on the power rating, the attenuators features female genders and can be bidirectional. They are made in accordance with precise industry standards. They have aluminum bodies. Pi attenuators or Pi pads are commonly employed by Pasternack for its attenuator designs.

Attenuator fixed - 500 MHz - 2 GHz

This series of fixed attenuators from Pasternack are supplied in 50 Ohm and 75 Ohm impedance. These come with 2.4mm, 2.92mm, F, N, 7mm, 7/16 DIN, BNC, SMA and TNC connectors. Their Rf dB attenuation...

Attenuator fixed - 500 MHz - 2 GHz

This series of fixed attenuators from Pasternack are supplied in 50 Ohm and 75 Ohm impedance. These come with 2.4mm, 2.92mm, F, N, 7mm, 7/16 DIN, BNC, SMA and TNC connectors. Their Rf dB attenuation values range from 0 dB to 60 dB and they have a frequency range from DC to 50 GHz. Low to high power attenuators which have the power handling capability up to 500 Watts are included in this product line.

Female and male genders are included in the series. Depending on the power rating they can be bidirectional and directional. Meeting industry specifications to the dot, the bodies are made from aluminum finned heatsink, nickel plated brass or stainless steel. For its attenuator designs, Pasternack typically uses Pi attenuators or Pi pads.

Attenuator programmable -

Pasternack voltage controlled attenuators are also known as programmable attenuators. They have impedance of 50 Ohm. This series is...

Attenuator programmable -

Pasternack voltage controlled attenuators are also known as programmable attenuators. They have impedance of 50 Ohm. This series is provided with SMA connectors. These attenuators have RF dB attenuation values between 1 dB to 63 B. Their frequency range is between 1 GHz to 18 GHz. Power handling capacity of this series is up to .5 Watts at 1 GHz. The voltage controlled attenuators have a female gender. Based on power rating, they can be bidirectional. The attenuators are made as per precise industry requirements.

Attenuator wide-band / RF -

The RF step attenuators from Pasternack have impedances of 50 Ohm and 75 Ohm and come with BNC connectors. Their Rf dB attenuation...

Attenuator wide-band / RF -

The RF step attenuators from Pasternack have impedances of 50 Ohm and 75 Ohm and come with BNC connectors. Their Rf dB attenuation values range from 1 dB to 110 dB and the frequency range from DC to 2 GHz. The family includes both low to high power attenuators handling power up to 6 Watts.

The line includes female versions, and bidirectional models depending on the power rating. The step attenuators are produced to exact industry specifications. Pi pads or Pi attenuators are used in these designs.

Attenuator coaxial

The Pasternack Enterprises latest attenuators have frequency varaitions from DC to 50 GHz which carry out up to the microwave K and Q bands. The maximum frequency attenuators are 1 watt to 2 watts that have...

Attenuator coaxial

The Pasternack Enterprises latest attenuators have frequency varaitions from DC to 50 GHz which carry out up to the microwave K and Q bands. The maximum frequency attenuators are 1 watt to 2 watts that have 2.4 mm and 2.92 mm power ratings for the SMA and are manufactured in stainless steel bodies and Beryllium Copper (BeCu) contacts.

The Pasternack broadband high frequency attenuators are accessible with attenuation numbers from 0 to 30 dB at 1 dB steps in a few models. The attenuators could be utilized for various applications consisting of RF test labs, R & D facilities, military electronics, telecom material, sercurity systems and others. The extension of Pasternack's millimeter wave attenuator series offers our clients with instantly obtainable top quality product solutions.
{{item.name}}