Solderless terminals

select brand


LEMO

Circular connector / screw coupling - ø 1.5 - 5 mm | 00 series

The 00 Connector Coaxial 50 Ω and Triaxial cables from LEMO is ideal for any...

Circular connector / screw coupling - ø 1.5 - 5 mm | 00 series

The 00 Connector Coaxial 50 Ω and Triaxial cables from LEMO is ideal for any...
Molex

Battery connector - 7 A, 0.7 - 4.5 mm

This is the most usual application to link battery packs which can be removed to handy devices but these connectors can as well give a compressed...

Battery connector - 7 A, 0.7 - 4.5 mm

This is the most usual application to link battery packs which can be removed to handy devices but these connectors can as well give a compressed answer for different kinds of tight-packaging applications. One of the advantages that Molex connectors have is that these connectors are giving different kinds of battery connectors as standard products with configurations that integrates SMT, compression-style and through-hole interfaces to the PCB, various circuit sizes. The orientation of its battery pack PCB is either right angle or parallel and comes in various pitch sizes.

Solderless connector / power - SCPC

Molex Self-Contained Power Connector (SCPC) is used for supporting two and three conductors and ground circuits for AC power applications.

SCPC...

Solderless connector / power - SCPC

Molex Self-Contained Power Connector (SCPC) is used for supporting two and three conductors and ground circuits for AC power applications.

SCPC series features insulation displacement contacts which provide termination of wire removing the need for pre-stripping of wires and has UL/CSA certification as a junction box.

The splice connectors splice two cable segments at once and substitute butt connectors, wire nuts, and junction boxes used in conventional splice functions. Tap connectors, used for supporting taps of existing cable segments and making new branch circuits, work in a similar fashion.

Solderless ring solderless terminal / heat-shrink - 22 - 8 AWG | Perma-Seal™

Perma-Seal waterproof adhesive terminals and splices offer durable, reliable connections that are moisture-proof and can withstand the most corrosive fluids that most conventional...

Solderless ring solderless terminal / heat-shrink - 22 - 8 AWG | Perma-Seal™

Perma-Seal waterproof adhesive terminals and splices offer durable, reliable connections that are moisture-proof and can withstand the most corrosive fluids that most conventional unsealed splices would have problems with (e.g. saltwater, gasoline, hydraulic fluids).

The Perma-Seal sleeve inner wall is lined with a unique hot-melt glue that is inert at room temperatures, allowing the insertion of wires into splices/terminals. With the heating of the sleeve, the glue melts and flows under pressure from the tubing, which causes existing voids to be filled and this in turn creates a seal that will fend off moisture and dust. It survives the most painstaking tests conducted on high-performance splices.

Magnet wire solderless terminal - MagKrimp™

MOLEX is the go-to place for any terminals and connectors. Their range of product includes the MagKrimp™ Connectors, Terminals and Splices. Designed primarily...

Magnet wire solderless terminal - MagKrimp™

MOLEX is the go-to place for any terminals and connectors. Their range of product includes the MagKrimp™ Connectors, Terminals and Splices. Designed primarily to provide reliable solutions in handling magnet wire and aluminum wire. The series boasts of crimp terminals created with sharp teeth or serrations that penetrate the insulating varnish on magnet wire so no need for peeling the outer cover of the wire. With an option of round, square or rectangular magnet wire. Proven versatile when it comes to its application. Caters to a multitude of applications. Easy to install and maintain.Low maintenance cost and very cost effective.

Bullet solderless terminal

Molex Wire Pin Terminals permit easy connections where clamps or set screws are utilized to...

Bullet solderless terminal

Molex Wire Pin Terminals permit easy connections where clamps or set screws are utilized to establish electrical contact with the wire. Wire Pins simplify the insertion of stranded wire into European-style terminal blocks and similar components and prevents wire strand foldback, and guaranteeing a stronger connection and correct electrical contact.
Smiths Connectors

Signal connector / spring-loaded pressure / PCB / probe - 12 Gbps

Smiths Connectors | IDI Interposers utilize spring probe contact techology in custom connector designs. Mixed signals and functionality can be designed into a single connector.

The interposer,...

Signal connector / spring-loaded pressure / PCB / probe - 12 Gbps

Smiths Connectors | IDI Interposers utilize spring probe contact techology in custom connector designs. Mixed signals and functionality can be designed into a single connector.

The interposer, or contact array, is the heart of the connector. It is also Smiths Connectors | IDIs specialty as the worlds leading spring contact probe manufacturer we are uniquely positioned to bring the advantages of this contact mechanism to life.
Insertion Life

Spring contact probes are driven by helical coil springs. This, combined with IDIs advanced materials and plating expertise, allows us to offer connectors which are capable of hundreds of thousands of insertions when properly specified. Even wiping interconnects can be made to withstand millions of rotations.

Spring-loaded pressure connector / low-profile



High insertion life
Suited for blind mate connections
...

Spring-loaded pressure connector / low-profile

High insertion life
Suited for blind mate connections
Low profile, high compliance ratio
Ideal for high shock and vibration environments

Smiths Connectors | IDI spring probe techology utilized in custom connector designs. Mixed signals and functionality can be designed into a single connector.

Signal connector / board-to-board / spring-loaded pressure / low-profile - 1 mm, 1 A | MLPI series

The spring loaded Microminiature Low Profile Interposer (MLPI Series) is designed for demanding applications where space and height are limited but high performance is essential, in particular board-to-board...

Signal connector / board-to-board / spring-loaded pressure / low-profile - 1 mm, 1 A | MLPI series

The spring loaded Microminiature Low Profile Interposer (MLPI Series) is designed for demanding applications where space and height are limited but high performance is essential, in particular board-to-board stacking connections in defense electronics.

Available in 30, 60, 90 and 120 positions with 1 mm pitch as standard and with 4 mm and 6 mm board to board height options, these high density connectors offer a space saving solution that does not require any mating counterpart. They are the only standard platform available that can fully support mixed signal operation for DC, RF and digital signal transmission in one solution, simultaneously if needed, which makes them adaptable to any application requiring high reliability performance and signal integrity.
{{item.name}}