+7 (812) 645-08-06
Busbars
select brand
Sheet steel busbar / variable / low-voltage - max. 7 000 A
High level of personal safety thanks to the patented door locking system
Arrangement of busbar positions suitable for the application
High level of flexibility thanks to variable busbar systems up to 7,000 A
Safety and functionality
The low-voltage power distribution board that combines economic design with high quality. Safe, user-friendly and appealing: the intelligent...
Arrangement of busbar positions suitable for the application
High level of flexibility thanks to variable busbar systems up to 7,000 A
Safety and functionality
The low-voltage power distribution board that combines economic design with high quality. Safe, user-friendly and appealing: the intelligent...
Sheet steel busbar / variable / low-voltage - max. 7 000 A
High level of personal safety thanks to the patented door locking system
Arrangement of busbar positions suitable for the application
High level of flexibility thanks to variable busbar systems up to 7,000 A
Safety and functionality
The low-voltage power distribution board that combines economic design with high quality. Safe, user-friendly and appealing: the intelligent design of the SIVACON S8 meets every demand. The frame and all of the bearing components of the section are made from stable, screw-fastened sheet steel profiles. Circumferential rows of holes allow for individual expansion. The patented door-locking system offers maximum safety: the universal doorhinge allows for the hinge side to bechanged with ease. The doors are available with either simple or central locking and can be fitted with various locking systems such as double bit fastener or pivoted lever lock. The roof plates feature pressure relief for additional safety. Section-to-section separation is provided as standard. The surfaces of frame components, bases, rear panels and floor plates are sendzimir-galvanized. Doors, covers and base panels are powdercoatedor lacquered.
Systematic flexibility
Whether your need is for simple systems or extensive networks with transversal and longitudinal couplings, SIVACON offers you all the flexibility you need. The busbars can be positioned at either the top or the rear and, if required, two busbar systems can also be integrated in a power distribution board.The shipping splits are easily accessible from the front or the top. The busbar connections require zero maintenance.
Arrangement of busbar positions suitable for the application
High level of flexibility thanks to variable busbar systems up to 7,000 A
Safety and functionality
The low-voltage power distribution board that combines economic design with high quality. Safe, user-friendly and appealing: the intelligent design of the SIVACON S8 meets every demand. The frame and all of the bearing components of the section are made from stable, screw-fastened sheet steel profiles. Circumferential rows of holes allow for individual expansion. The patented door-locking system offers maximum safety: the universal doorhinge allows for the hinge side to bechanged with ease. The doors are available with either simple or central locking and can be fitted with various locking systems such as double bit fastener or pivoted lever lock. The roof plates feature pressure relief for additional safety. Section-to-section separation is provided as standard. The surfaces of frame components, bases, rear panels and floor plates are sendzimir-galvanized. Doors, covers and base panels are powdercoatedor lacquered.
Systematic flexibility
Whether your need is for simple systems or extensive networks with transversal and longitudinal couplings, SIVACON offers you all the flexibility you need. The busbars can be positioned at either the top or the rear and, if required, two busbar systems can also be integrated in a power distribution board.The shipping splits are easily accessible from the front or the top. The busbar connections require zero maintenance.
Busbar system - 800 - 8 200 A | LDM
Efficient in planning:
Modular system for individual customer requirements
Easy installation:
Compact design, with proven hook and bolt joining system from high-current busbar trunking systems
Fast and safe commissioning:
Busbars with pre-defined impedances and stipulated technical properties
Safe in...
Modular system for individual customer requirements
Easy installation:
Compact design, with proven hook and bolt joining system from high-current busbar trunking systems
Fast and safe commissioning:
Busbars with pre-defined impedances and stipulated technical properties
Safe in...
Busbar system - 800 - 8 200 A | LDM
Efficient in planning:
Modular system for individual customer requirements
Easy installation:
Compact design, with proven hook and bolt joining system from high-current busbar trunking systems
Fast and safe commissioning:
Busbars with pre-defined impedances and stipulated technical properties
Safe in operation:
Low fire load by sheet-steel housing
High degree of safety through design verified assembly in accordance with IEC 61439-1/-6
Reliable:
Developed on the basis of the proven LD system
Cost-efficient operation:
Maintenance-free busbar trunking system with improved, scalable efficiency
Sustainable:
Halogen-free and fully recyclable
Efficient - Optimize your planning time
Modular and with individual design
- Among others, cable feeders and busbar elements according to the individual customer requirement
Well-conceived components
- Among others, special segment connections to compensate for manufacturing tolerances at the tower
Compact design
- Possibility to lay the rotor and stator sections in a housing for double-fed asynchronous generators
- PE conductor in the housing, optional
Efficient support
- From an experienced wind power team in all phases of the project
Modular system for individual customer requirements
Easy installation:
Compact design, with proven hook and bolt joining system from high-current busbar trunking systems
Fast and safe commissioning:
Busbars with pre-defined impedances and stipulated technical properties
Safe in operation:
Low fire load by sheet-steel housing
High degree of safety through design verified assembly in accordance with IEC 61439-1/-6
Reliable:
Developed on the basis of the proven LD system
Cost-efficient operation:
Maintenance-free busbar trunking system with improved, scalable efficiency
Sustainable:
Halogen-free and fully recyclable
Efficient - Optimize your planning time
Modular and with individual design
- Among others, cable feeders and busbar elements according to the individual customer requirement
Well-conceived components
- Among others, special segment connections to compensate for manufacturing tolerances at the tower
Compact design
- Possibility to lay the rotor and stator sections in a housing for double-fed asynchronous generators
- PE conductor in the housing, optional
Efficient support
- From an experienced wind power team in all phases of the project
Busbar system - 800 - 6 300 A | LI
Safe operation as design verified in accordance with current standard IEC 61439-1 / -6
High degree of protection IP55
Fire barriers tested in accordance with European Standard EN 1366-3
Integrated, efficient and future-proof solution due to integration...
High degree of protection IP55
Fire barriers tested in accordance with European Standard EN 1366-3
Integrated, efficient and future-proof solution due to integration...
Busbar system - 800 - 6 300 A | LI
Safe operation as design verified in accordance with current standard IEC 61439-1 / -6
High degree of protection IP55
Fire barriers tested in accordance with European Standard EN 1366-3
Integrated, efficient and future-proof solution due to integration...
High degree of protection IP55
Fire barriers tested in accordance with European Standard EN 1366-3
Integrated, efficient and future-proof solution due to integration...
Busbar system - 10 - 16 mm²
The busbar system with pin-type terminals can be used for all 5SJ6 ...-.KS and 5SY miniature circuit breakers with or without mounted auxiliary switch (AS) or fault signal contact (FC).
Busbars are available in 10 mm2 and 16 mm2 versions.
The 5ST3 7 busbar system with busbars that can be cut to any length required.
The extremely flexible 5ST3 6 busbar system with fixed lengths enables...
Busbars are available in 10 mm2 and 16 mm2 versions.
The 5ST3 7 busbar system with busbars that can be cut to any length required.
The extremely flexible 5ST3 6 busbar system with fixed lengths enables...
Busbar system - 10 - 16 mm²
The busbar system with pin-type terminals can be used for all 5SJ6 ...-.KS and 5SY miniature circuit breakers with or without mounted auxiliary switch (AS) or fault signal contact (FC).
Busbars are available in 10 mm2 and 16 mm2 versions.
The 5ST3 7 busbar system with busbars that can be cut to any length required.
The extremely flexible 5ST3 6 busbar system with fixed lengths enables installation in any length as the busbars can be overlapped. No further need for time-consuming tasks, such as cutting, cutting to length, deburring, cleaning of cut surfaces and mounting of end caps.
Any free pins on the busbars can be made safe by covering with touch protection.
For further information on bus-mounting miniature circuit breakers with residual current operated circuit breakers, please refer to the chapter "Residual current protective devices".
Benefits
Between the devices, the busbar, located at the bottom and behind the conductor, provides an optimum wiring space with easy view of the inserted conductor. This enables easy control of connections.
The ability to overlap the busbar mounting enables a crosssection enlargement of up to 32 mm2 using the respectivecomponents, 10 and 16 mm2.
By overlapping the busbars with fixed lengths, it is possible to achieve device combinations with any number of devices.
The fact that the connection of the conductor is always clearly visible facilitates control and insertion of conductors of all pole types and considerably reduces mounting times.
Busbars are available in 10 mm2 and 16 mm2 versions.
The 5ST3 7 busbar system with busbars that can be cut to any length required.
The extremely flexible 5ST3 6 busbar system with fixed lengths enables installation in any length as the busbars can be overlapped. No further need for time-consuming tasks, such as cutting, cutting to length, deburring, cleaning of cut surfaces and mounting of end caps.
Any free pins on the busbars can be made safe by covering with touch protection.
For further information on bus-mounting miniature circuit breakers with residual current operated circuit breakers, please refer to the chapter "Residual current protective devices".
Benefits
Between the devices, the busbar, located at the bottom and behind the conductor, provides an optimum wiring space with easy view of the inserted conductor. This enables easy control of connections.
The ability to overlap the busbar mounting enables a crosssection enlargement of up to 32 mm2 using the respectivecomponents, 10 and 16 mm2.
By overlapping the busbars with fixed lengths, it is possible to achieve device combinations with any number of devices.
The fact that the connection of the conductor is always clearly visible facilitates control and insertion of conductors of all pole types and considerably reduces mounting times.
Busbar system - 40 - 160 A | BD01
The BD01 system is designed for applications from 40A to 160A. It is engaged in trade and industry enterprises to safely supply a small consumers with power or the...
Busbar system - 40 - 160 A | BD01
The BD01 system is designed for applications from 40A to 160A. It is engaged in trade and industry enterprises to safely supply a small consumers with power or the in-feed of the CD-K system. Systematization is especially plain and it guarantee a flexible power supply. The BD01 busbar trunking system is a finger-safe connection amidst secured opening as well as shutting of the tap-off point. Optimum planning and decreased stock keeping amidst system up to 160A in one size with 5 current intensities. Additionally,its easy configuration and handling amidst connection flanges with built-in expansion compensation and safe demand-oriented power supply.
Busbar system - 60 mm, max. 1 600 A | RiLine60 series
Presenting a revolutionary new product. The Rittal-System Busbar systems RiLine is a product of great ingenuity and brilliance. It is Built to last and tested...
Busbar system - 60 mm, max. 1 600 A | RiLine60 series
Presenting a revolutionary new product. The Rittal-System Busbar systems RiLine is a product of great ingenuity and brilliance. It is Built to last and tested in all aspects. It features In the field of low-voltage technology, the RiLine60 plays a key role in control and distribution technology for industrial systems and data centres, as well as in Rittal Ri4Power distribution system. - Flat bar system up to 800A. It also exhibits PLS bushbar system 800A/1600 A. - 60mm bar centre distance, 3- and 4-pole. -All systems components such as bushbar connection adaptors, fuse elements and component adaptors are easily etc.
Busbar system - 40 mm, max. 250 A | Mini-PLS series
Presenting a revolutionary new product. The Rittal Busbar system is a top of the line product. Created from sheer ingenuity and brilliance. The Rittal...
Busbar system - 40 mm, max. 250 A | Mini-PLS series
Presenting a revolutionary new product. The Rittal Busbar system is a top of the line product. Created from sheer ingenuity and brilliance. The Rittal Mini-PLS busbar system with 40 mm bar centre distance is sure to impress, with its unique use of space and fast assembly. It features High static and thermal load capacity thanks to the T-support form of the special rail , The components are simply plugged in from the front, Busbar support suitable for top mounting , Contact hazard protection thanks to all-round accommodation (end cover, base tray and cover section). A definite must have by anyone.
Busbar - DIN NS 35/15 | 9494 series
The BusRail Series 9494 is the IS1 system Backplane bus, which is composed of...
Busbar - DIN NS 35/15 | 9494 series
The BusRail Series 9494 is the IS1 system Backplane bus, which is composed of the Ex i PoweBus, data bus, and address circuits, used for 2 or 4 modules. Interconnection to a maximum of 18 modules possible through interconnection of Busrail. Passive components are designed with redundancy and high availability.