Hall effect angle sensors

select brand


CHERRY - ZF ELECTRONICS FRANCE

Hall effect angle sensor / heavy-duty / non-contact - CHERRY AN9

The AN9 Model is a rugged non-contact hall effect angle sensor developed by Cherry. It is built with a protection rating of IP 68. This unit comes with high resistance...

Hall effect angle sensor / heavy-duty / non-contact - CHERRY AN9

The AN9 Model is a rugged non-contact hall effect angle sensor developed by Cherry. It is built with a protection rating of IP 68. This unit comes with high resistance...

Hall effect angle sensor / non-contact - CHERRY AN1

The AN1 is an angle position sensor engineered by Cherry. It is suitable for use in applications...

Hall effect angle sensor / non-contact - CHERRY AN1

The AN1 is an angle position sensor engineered by Cherry. It is suitable for use in applications...

Magnetic angle sensor / non-contact - 360 ° | CHERRY AN8

The AN8 sensor is manufactured by Cherry Switches, and can be controlled through the use of the hall...

Magnetic angle sensor / non-contact - 360 ° | CHERRY AN8

The AN8 sensor is manufactured by Cherry Switches, and can be controlled through the use of the hall...
CHERRY

Magnetic angle sensor / non-contact - AN101101 series

Description

One-piece, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated...

Magnetic angle sensor / non-contact - AN101101 series

Description

One-piece, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft

Features

Patented intrinsically linear angle position sensor (ILAPS)
Magnet/sensor orientation provides linear output from 5⁰ to 85⁰ of rotation without the need for electrical compensation
Return spring provides resistance to CCW motion
Fully encapsulated electronics
RoHS compliant
IP67

Magnetic angle sensor / non-contact - AN8 series

Description

Non-contact, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide...

Magnetic angle sensor / non-contact - AN8 series

Description

Non-contact, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft

Features

Angular position sensor with high tolerance for misalignment
Non-contact angular position sensing and full 360⁰ rotation
Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory
No mechanical interface means no parts to wear out or jam
Available with Delphi connector or 12” (305 mm) wire leads
RoHS compliant
IP67
Maximum air gap of 5.5 mm (0.22”)*

Magnetic angle sensor / dual output - AN9 series

Description

Non-contact, intrinsically linear contact angle position sensors with two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input...

Magnetic angle sensor / dual output - AN9 series

Description

Non-contact, intrinsically linear contact angle position sensors with two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft

Features

Angular position sensor with high tolerance for misalignment
Non-contact angular position sensing and full 360⁰ rotation
Dual independent (redundant) outputs assure high reliability
Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory
No mechanical interface means no parts to wear out or jam
Comes with 18 AWG 305 mm (12”) wire leads
RoHS Compliant
IP67
Maximum air gap of 5.5 mm (0.22”)*

*with AS500106 magnet carrier

Typical Applications

Implement (fork lift, agricultural trailer hitch, etc.) position sensing
Steer, throttle by wire
Gear selection
Zero-contact encoder alternative

Angular position sensor / magnetic / rugged / non-contact - AS500106 series

Available as stand-alone magnet or in kits with AN8 sensors

Magnet carrier for CHERRY AN8 and AN9 sensors
PPS Housing
SmCo28 Magnet
AB Elektronik

Hall effect angle sensor / non-contact - 0.5 - 4.5 V, 60° | 91020 series

Supply: 5 V ± 0.5 V
Output signal: 0.5 - 4.5 V
Current consumption: 6 mA
Sealing grade: IPX9K in...

Hall effect angle sensor / non-contact - 0.5 - 4.5 V, 60° | 91020 series

Supply: 5 V ± 0.5 V
Output signal: 0.5 - 4.5 V
Current consumption: 6 mA
Sealing grade: IPX9K in...

Hall effect angle sensor / heavy-duty / non-contact - 0.5 - 4.5 V, 70 - 120° | 91xxx series

Supply: 5 V / 5 mA max per signal
Output signal: 1 or 2 signals
Sealing grade: IP 67 / IP 69
Temperature...

Hall effect angle sensor / heavy-duty / non-contact - 0.5 - 4.5 V, 70 - 120° | 91xxx series

Supply: 5 V / 5 mA max per signal
Output signal: 1 or 2 signals
Sealing grade: IP 67 / IP 69
Temperature...

Hall effect angle sensor / heavy-duty / non-contact - 0.5 - 4.5 V, 30 - 360° | 91xxx series

Supply: 5 V / 5 mA max per signal
Output signal: analogue, voltage interface, 1 or 2 signals
Sealing grade: IP...

Hall effect angle sensor / heavy-duty / non-contact - 0.5 - 4.5 V, 30 - 360° | 91xxx series

Supply: 5 V / 5 mA max per signal
Output signal: analogue, voltage interface, 1 or 2 signals
Sealing grade: IP...

Hall effect angle sensor / non-contact - 0.68 - 4.25, 86° | 41665 series

Supply: 5 ± 0.1 V
Output signal: analogue, voltage interface
Sealing grade: IP...

Hall effect angle sensor / non-contact - 0.68 - 4.25, 86° | 41665 series

Supply: 5 ± 0.1 V
Output signal: analogue, voltage interface
Sealing grade: IP...
{{item.name}}