+7 (812) 645-08-06
Tensiometers: surface tension
select brand
Tensiometer for surface and interfacial tension measurement - K100
The K100 force tensiometer is ideally used for measuring surface tension and interfacial...
Tensiometer for surface and interfacial tension measurement - K100
The K100 force tensiometer is ideally used for measuring surface tension and interfacial tension, CMC and contact angle on solids, fibers, and powders. It is fitted with high grade components and a vast array of methods which allows it to deliver tasks in surfactant analysis and wetting measurement for research or quality control services.
Ring and plate tensiometer - K100SF
K100SF is a greater accuracy pressure Tensiometer engineered for observing the dampness of individual fibers by computing the communication angle. It consists of an attached high resolution pressure sensor and...
Ring and plate tensiometer - K100SF
K100SF is a greater accuracy pressure Tensiometer engineered for observing the dampness of individual fibers by computing the communication angle. It consists of an attached high resolution pressure sensor and hence can dependably compute the damping pressures for slim fibers. These fibers include individual carbon fibers that consist of fewer microns.
This device offers a high quality in the enhancement of fiber finishing, especially for implantation of fibers in fiber strengthened components. Certain applications require a better dampness of fibers with a high adhesion. The individual fibers can be computed at an initial level using the K100SF ahead of packaging or matting of the fibers. This also helps in prior detection of quality errors that cause low manufacturing residues and lowers the prices.
This device offers a high quality in the enhancement of fiber finishing, especially for implantation of fibers in fiber strengthened components. Certain applications require a better dampness of fibers with a high adhesion. The individual fibers can be computed at an initial level using the K100SF ahead of packaging or matting of the fibers. This also helps in prior detection of quality errors that cause low manufacturing residues and lowers the prices.
Ring and plate tensiometer - K11
Kruss' Force Tensiometer K 11 is a precision instrument for quality control. It operates fully automatically, and provides reliable measurements of interfacial and surface tension. Its components and ease-of-operation...
Ring and plate tensiometer - K11
Kruss' Force Tensiometer K 11 is a precision instrument for quality control. It operates fully automatically, and provides reliable measurements of interfacial and surface tension. Its components and ease-of-operation capabilities provide support in the optimization of interfacial process and surfactant solutions.
The K 11 measures tension based on a force rate that appears when the probe is wetted. It features a high-quality sensor that delivers accurate readings and reproducibility. The probe showcases precision contours, in order to achieve extensive levels of measurement. Accurate measuring of the liquid density is also exhibited by the device. This method is especially useful when using the ring method, as the density is used to calculate the surface tension from the force. Carrying out of any external measuring is excluded.
The K 11 measures tension based on a force rate that appears when the probe is wetted. It features a high-quality sensor that delivers accurate readings and reproducibility. The probe showcases precision contours, in order to achieve extensive levels of measurement. Accurate measuring of the liquid density is also exhibited by the device. This method is especially useful when using the ring method, as the density is used to calculate the surface tension from the force. Carrying out of any external measuring is excluded.
Ring and plate tensiometer - K20
The K20 is a force tensiometer from Kruss that is used to acquire precise measurement of surface tension and interfacial tension. It utilizes the ring and plate method as the...
Ring and plate tensiometer - K20
The K20 is a force tensiometer from Kruss that is used to acquire precise measurement of surface tension and interfacial tension. It utilizes the ring and plate method as the main tensiometric principle to provide accurate measurements for quality assurance of surfactant solutions and interfacial processes. This device measures the surface tension and interfacial tension based on the wetting force acting on a measuring probe. The precision force sensor and measuring probes of rings and plates are forged to guarantee reliable and reproducible values. It can also measure liquid density quickly and accurately. It is offered with long-life battery operation as well as integrated memory.
Bubble pressure tensiometer - BP100
The Bubble Pressure Tensiometer BP100 is designed for highly accurate dynamic surface tension measurement, and is fully capable of determining mobility of surfactants, allowing optimization for high-speed processes that include spraying,...
Bubble pressure tensiometer - BP100
The Bubble Pressure Tensiometer BP100 is designed for highly accurate dynamic surface tension measurement, and is fully capable of determining mobility of surfactants, allowing optimization for high-speed processes that include spraying,...
Ring and plate tensiometer - 0 - 180 mN/m | JZHY-180
JZHY-180 Interface Tensiometer is an ideal device used to inspect the insulation oil materials in irrigation works, electric power department;...
Ring and plate tensiometer - 0 - 180 mN/m | JZHY-180
JZHY-180 Interface Tensiometer is an ideal device used to inspect the insulation oil materials in irrigation works, electric power department; or research and education work in petroleum and chemical engineering field. With easy to operate, small weight and volume, it efficiently determines matric water (soil moisture) potential tension in the vadose zone and complies with standards- JB/T9388 and ISO1409.It features manual operation, dial display and showcases platinum ring, platinum torsional wire, bracket, lever rack and worm wheel.
Tensiometer for surface and interfacial tension measurement - 0 - 199.9 mN/m | JZYW－200A
The JZYW-200A from Beijing United Test Co., Ltd., is an interface tensiometer that is suitable for the determination of matric water (soil...
Tensiometer for surface and interfacial tension measurement - 0 - 199.9 mN/m | JZYW－200A
The JZYW-200A from Beijing United Test Co., Ltd., is an interface tensiometer that is suitable for the determination of matric water (soil moisture) potential tension in the vadose zone. It is used in a wide variety of applications in irrigation works, electric power department, as well as for research and education work in petroleum, chemical engineering, and science academy. It is easy to use, and provides precise automatic measurements. The system comes with platinum ring, platinum torsional wire, differential sensor and data processing system.
Computer controlled tensiometer - JZYW-200B
The JZYW-200B from Beijing United Test Co., Ltd., is a computer controlled tensiometer that is suitable for the determination...
Computer controlled tensiometer - JZYW-200B
The JZYW-200B from Beijing United Test Co., Ltd., is a computer controlled tensiometer that is suitable for the determination of matric water (soil moisture) potential tension in the vadose zone. It is used in a wide variety of applications in irrigation works, electric power department, as well as for research and education work in petroleum, chemical engineering, and science academy. It is easy to use, and can be adapted to a PC when controlling test procedure.
Ring and plate tensiometer - max. 999 mN/m | TD 1 C
The TD1 C is a tensiometer that ensures flexibility and precision. It is based on tested technology for a new fully developed design....
Ring and plate tensiometer - max. 999 mN/m | TD 1 C
The TD1 C is a tensiometer that ensures flexibility and precision. It is based on tested technology for a new fully developed design. The unit offers easy handling, and displays measurement values through a portable remote control.
The tensiometer is equipped with a sample stage that can be manually adjusted. The evaluated values are printed on an optional protocol printer. In addition, the equipment also provides extended documentation options through the use of its processor technology.
The tensiometer is equipped with a sample stage that can be manually adjusted. The evaluated values are printed on an optional protocol printer. In addition, the equipment also provides extended documentation options through the use of its processor technology.
Tensiometer for surface and interfacial tension measurement - max. 999 mN/m | TD 3
Lauda has equipped the compact TD 3 Tensiometer with a stirring Peltier thermostat unit. The device contains a precise surface and interface...
Tensiometer for surface and interfacial tension measurement - max. 999 mN/m | TD 3
Lauda has equipped the compact TD 3 Tensiometer with a stirring Peltier thermostat unit. The device contains a precise surface and interface tension at constant temperature. The surface materials of the TD 3 are chemically resistant, and are suitable for almost all fields of application. In addition, this equipment can also be used in determining the interfacial tension in transformer oils for assessing the ageing. This tensiometer can be used in different areas of applications, such as beverage, food and petrochemical industries.
Drop volume tensiometer - 0.1 - 100 mN/m | TVT 2
The TVT 2 is manufactured by Lauda DR. R. Wobser GmbH & Co. KG. It is a drop volume tensiometer, with a range from 0.1 mN/m to100 mN/m. The tensiometer...
Drop volume tensiometer - 0.1 - 100 mN/m | TVT 2
The TVT 2 is manufactured by Lauda DR. R. Wobser GmbH & Co. KG. It is a drop volume tensiometer, with a range from 0.1 mN/m to100 mN/m. The tensiometer measures the dynamic surface tension and interfacial tension of liquids. It is controlled via Windows with minimum loading of the computer, even when engaged in multiple tasks.
New function that the TVT 2 can perform is the individual drop measurement of up to 100 drops. The TVT 2 has a measurement desk and a control unit. It also has LED display and pictograms, which indicate the current status of the volume tensiometer.
New function that the TVT 2 can perform is the individual drop measurement of up to 100 drops. The TVT 2 has a measurement desk and a control unit. It also has LED display and pictograms, which indicate the current status of the volume tensiometer.
Bubble pressure tensiometer - 10 - 100 mN/m | MPT C
The LAUDA bubble pressure tensiometer in the MPT C product series can be used to record fast surfactants in the millisecond range. The new bubble pressure tensiometers...
Bubble pressure tensiometer - 10 - 100 mN/m | MPT C
The LAUDA bubble pressure tensiometer in the MPT C product series can be used to record fast surfactants in the millisecond range. The new bubble pressure tensiometers have been added to the LAUDA family, and, in opposition to scientific research tensiometers, the final step of this process has been taken for the full automation of dynamic surface tension measuring.
Note that the ultimate user-friendliness is achieved without taking a detour via the PC, while the extremely compact stand-alone device provides all the necessary features for measuring the dynamic surface tensions in the laboratory, or as a mobile device.
Note that the ultimate user-friendliness is achieved without taking a detour via the PC, while the extremely compact stand-alone device provides all the necessary features for measuring the dynamic surface tensions in the laboratory, or as a mobile device.