+7 (812) 645-08-06
Hardness testers
select brand
Portable hardness tester - DynaPOCKET
The DynaPOCKET is an integrated digital hardness tester that utilizes the dynamic rebound (Leeb) principle which conforms to ASTM A956 and DIN 50156 standards. The tester...
Portable hardness tester - DynaPOCKET
The DynaPOCKET is an integrated digital hardness tester that utilizes the dynamic rebound (Leeb) principle which conforms to ASTM A956 and DIN 50156 standards. The tester...
Electric hardness tester / manual - DynaMIC
DynaMIC hardness tester functions as per the rebound hardness testing method, which has been standardized according to ASTM A956. It uses a patented technique for processing of signal that provides automatic compensation for any testing direction variations....
Electric hardness tester / manual - DynaMIC
DynaMIC hardness tester functions as per the rebound hardness testing method, which has been standardized according to ASTM A956. It uses a patented technique for processing of signal that provides automatic compensation for any testing direction variations. This leads to accurate hardness measurement irrespective of impact direction.
The hardness testing, or positioning for impact devices and reading of hardness value, takes only a few seconds. A proper material and application match is maintained with the help of various impact devices.
The DynaMIC DL Data Logger model allows internal storage of hardness values with statistical data.
DynaMIC allows hardness to be automatically converted to HV, HB, HRC, HRB, HS, HL and N/mm2.
Based on the application, different impact devices are available . For standard usages, Dyna D is ideal. For heavyweight, solid components, Dyna G should be used. For hardness ranging beyond 650HV, Dyna E is suitable.
The hardness testing, or positioning for impact devices and reading of hardness value, takes only a few seconds. A proper material and application match is maintained with the help of various impact devices.
The DynaMIC DL Data Logger model allows internal storage of hardness values with statistical data.
DynaMIC allows hardness to be automatically converted to HV, HB, HRC, HRB, HS, HL and N/mm2.
Based on the application, different impact devices are available . For standard usages, Dyna D is ideal. For heavyweight, solid components, Dyna G should be used. For hardness ranging beyond 650HV, Dyna E is suitable.
Indentation hardness tester - TIV
The TIV (Through Indenter Viewing) method is applicable for testing companies using a universal, portable unit. It is also widely used in research institutes, coil manufacturers, and...
Indentation hardness tester - TIV
The TIV (Through Indenter Viewing) method is applicable for testing companies using a universal, portable unit. It is also widely used in research institutes, coil manufacturers, and heat treat shops. It is a technique based on hardness testing according to Vickers by means of special optics. It is made up of injection-molded plastics and weighs approximately 1.4 kg (3.1 pounds) including MIC 20-BAT. It is reliable to use since the indentation of the images can be transferred and evaluated automatically, directly, and quickly.
Other features include TIV through special lenses and a CCD camera and direct evaluation and assessment of the quality through observation of the indentation on the screen.
Other features include TIV through special lenses and a CCD camera and direct evaluation and assessment of the quality through observation of the indentation on the screen.
Vickers hardness tester - MIC 20
The MIC 20 is a dynamic two-in-one tester which utilizes both UCI (Ultrasonic Contact Impedance) and rebound test methods (standardized to ASTM A956, A 1038 and DIN 50156, 50159).
The UCI method performs testing on tiny, complex parts that...
The UCI method performs testing on tiny, complex parts that...
Vickers hardness tester - MIC 20
The MIC 20 is a dynamic two-in-one tester which utilizes both UCI (Ultrasonic Contact Impedance) and rebound test methods (standardized to ASTM A956, A 1038 and DIN 50156, 50159).
The UCI method performs testing on tiny, complex parts that consists fine grained metals. Whereas the rebound method is often used for larger, coarse-grained forgings and castings.
The Krautkramer MIC 20 on the other hand is an amalgamation of the quasi-static UCI and the dynamic rebound hardness testing methods. The MIC has introduced a "hardness testing in a twin pack" for your convenience by using two separate method to cover their complete application range.
All these qualities make MIC 20 a globally accepted instrument which can be used to fine-grained materials with different masses and shapes or heat treated surfaces (UCI method). Additionally, you can also test large, coarse-grained components, forgings, and cast materials (rebound method).
The UCI method performs testing on tiny, complex parts that consists fine grained metals. Whereas the rebound method is often used for larger, coarse-grained forgings and castings.
The Krautkramer MIC 20 on the other hand is an amalgamation of the quasi-static UCI and the dynamic rebound hardness testing methods. The MIC has introduced a "hardness testing in a twin pack" for your convenience by using two separate method to cover their complete application range.
All these qualities make MIC 20 a globally accepted instrument which can be used to fine-grained materials with different masses and shapes or heat treated surfaces (UCI method). Additionally, you can also test large, coarse-grained components, forgings, and cast materials (rebound method).
Vickers hardness tester / portable - MIC 10
MIC 10 is known for the convenient and quick on-site hardness testing, which is done according to the UCI method (Ultrasonic Contact Impedance), which is also compatible with the DIN 50156 and ASTM A956 standards. The diamond indent...
Vickers hardness tester / portable - MIC 10
MIC 10 is known for the convenient and quick on-site hardness testing, which is done according to the UCI method (Ultrasonic Contact Impedance), which is also compatible with the DIN 50156 and ASTM A956 standards. The diamond indent in the surface of the material is measured electronically, being instantly displayed without the use of the cumbersome optical evaluation, which is associated with conventional hardness testers.
With the press of a key, users can easily display a single value, as well as active arithmetical single values of a hardness measurement set. They can also edit erroneous single values without requiring any interruption in terms of the measurement set. The alarm is adjustable and comes with both audible and visual alarms. The calibration measurement parameters on low and non-alloyed steel are pre-programmed into the MIC10, but can be quickly and easily recalibrated to other materials.
With the press of a key, users can easily display a single value, as well as active arithmetical single values of a hardness measurement set. They can also edit erroneous single values without requiring any interruption in terms of the measurement set. The alarm is adjustable and comes with both audible and visual alarms. The calibration measurement parameters on low and non-alloyed steel are pre-programmed into the MIC10, but can be quickly and easily recalibrated to other materials.
Rockwell hardness tester - 206 EX
The 206 EX model hardness tester, manufactured by AFFRI, features a quick yet user-friendly...
Rockwell hardness tester - 206 EX
The 206 EX model hardness tester, manufactured by AFFRI, features a quick yet user-friendly operating mechanism. In addition, this instrument may be operated given any type of condition without the need to be leveled.
An optional clamping press piece may be availed upon request. Furthermore, a basic Rockwell system as an option is also possible.
An optional clamping press piece may be availed upon request. Furthermore, a basic Rockwell system as an option is also possible.
Rockwell hardness tester / Brinell / automatic - 206 RSD
The RSD AFFRI® System Hardness tester is optimized by the innovative measurement technology and is equipped with a vertical measurement system. This tester meets an quality...
Rockwell hardness tester / Brinell / automatic - 206 RSD
The RSD AFFRI® System Hardness tester is optimized by the innovative measurement technology and is equipped with a vertical measurement system. This tester meets an quality...
Rockwell hardness tester / Brinell / automatic - 250 MRS
The 250 MRS is an enhanced measurement technology, designed with a vertical measure system. The tester reaches an adequate level of...
Rockwell hardness tester / Brinell / automatic - 250 MRS
The 250 MRS is an enhanced measurement technology, designed with a vertical measure system. The tester reaches an adequate level of measurement of depth accuracy and resolution, available for a Hardness Test.
It is provided with a closed-loop electronic force measuring system, and precise in-line depth measuring technology to guarantee quick, accurate, and reliable testing, even in case of bending of 50 mm, or on an unstable or oiled surface. In addition, the tester comes with a multifunctional keypad.
It is provided with a closed-loop electronic force measuring system, and precise in-line depth measuring technology to guarantee quick, accurate, and reliable testing, even in case of bending of 50 mm, or on an unstable or oiled surface. In addition, the tester comes with a multifunctional keypad.
Digital hardness tester / universal - 251 VRSD
The 251 VRSD is a hardness tester that is is comprised of a unique closed loop electronic force measuring system and a precised in-line depth measuring...
Digital hardness tester / universal - 251 VRSD
The 251 VRSD is a hardness tester that is is comprised of a unique closed loop electronic force measuring system and a precised in-line depth measuring technology for quick, accurate and dependable test, even in times of bending of 50 mm or on unstable or oiled surface. It features one start button to perform surface contact and test piece clamping from any distance and motorized test cycle.
The tester provides a broad working space that has the capacity to bear 1000 kg test pieces. It features a digital or automated measurement for Vickers and Brinell units.
The tester provides a broad working space that has the capacity to bear 1000 kg test pieces. It features a digital or automated measurement for Vickers and Brinell units.
Indentation hardness tester - 10 x - 50 x |Tukon 1102
This unit is designed with a multitude of features that include 1 indenter position,...
Indentation hardness tester - 10 x - 50 x |Tukon 1102
This unit is designed with a multitude of features that include 1 indenter position, 10x and 50x objectives, auto-turret, touch LCD, vickers indenter, standardized test block and analog stage. The accessories and eyepiece come in a suitcase. The unit is capable of supporting automation accessories.
Indentation hardness tester - 5 x - 50 x | Tukon 1202
The Tukon 1202 Series manufactured by Buehler, is an indentation hardness tester that is made with 1 indenter...
Indentation hardness tester - 5 x - 50 x | Tukon 1202
The Tukon 1202 Series manufactured by Buehler, is an indentation hardness tester that is made with 1 indenter position only. This device is equipped with an LCD touch display. It is available with a wide range of accessories like the vickers indenter,digital stage, eyepiece, standardized test-block and etc.
Moreover, the Tukon 1202 indentation hardness tester has the capacity to support the automation accessories.
Moreover, the Tukon 1202 indentation hardness tester has the capacity to support the automation accessories.