Ultrasonic level sensors

select brand


BANNER ENGINEERING CORP.

Ultrasonic level sensor - max. 8 m | U-GAGE QT50U series

Senses extended range of up to 8 m
Features ultrasonic dead-zone of only 2.5% of the total range75% less than comparable products
Available in analog or discrete dc models and in ac/dc universal voltage...

Ultrasonic level sensor - max. 8 m | U-GAGE QT50U series

Senses extended range of up to 8 m
Features ultrasonic dead-zone of only 2.5% of the total range75% less than comparable products
Available in analog or discrete dc models and in ac/dc universal voltage models with electromechanical relay output
Features a completely sealed, shock-resistant housing that is ideal for monitoring levels of liquids as well as solids
Uses a narrow sensing beam to detect targets at long range within confined areassuch as a storage tankwithout interference from the tank walls
Available in chemically resistant models with a Teflon coating to protect the transducer
Compensates for temperature, for greatest sensing accuracy
Simplifies setup with push-button and remote TEACH-mode programming
Shows status during setup and operation, using highly visible LEDs indicators

Ultrasonic level sensor / heavy-duty / for the food industry - 250 - 500 mm | U-GAGE M25U series

U-GAGE M25U Ultrasonic Sensors is an innovative equipment for managing effortless operation in the industry pertaining to sanitary and food processing. This is a quality equipment made up...

Ultrasonic level sensor / heavy-duty / for the food industry - 250 - 500 mm | U-GAGE M25U series

U-GAGE M25U Ultrasonic Sensors is an innovative equipment for managing effortless operation in the industry pertaining to sanitary and food processing. This is a quality equipment made up...
ENDRESS HAUSER

Ultrasonic level sensor / slurry - max. 3 m, -40 °C ... +80 °C | Prosonic FDU90

The Prosonic S FDU90 is an ultrasonic sensor for non-contact continuous flow and level measurement. It can be connected to the transmitter FMU90/FMU95, and minimizes service requirements with its non-contact measurement...

Ultrasonic level sensor / slurry - max. 3 m, -40 °C ... +80 °C | Prosonic FDU90

The Prosonic S FDU90 is an ultrasonic sensor for non-contact continuous flow and level measurement. It can be connected to the transmitter FMU90/FMU95, and minimizes service requirements with its non-contact measurement method.

It generates accurate measurements even if there are temperature changes because of its integrated temperature sensor for time-of-flight correction. The PVDF sensor is hermetically welded for the highest chemical resistance, and has an integrated automatic sensor for transmitters FMU95/FMU90.

It can even be installed up to 300m from the transmitter. It has a separate installation from the transmitter which makes it suitable for rough conditions. It has a self-cleaning effect which will reduce build-up formation, and is flood-proof and weather resistant. It also features the Gas-Ex and Dust-Ex certifications.

Ultrasonic level sensor / chemical-resistant - max. 10 m, -40 °C ... +80 °C | Prosonic FDU91

This compact transmitter is ideal for the quick and simple non-contact level measurements of liquids, pastes and bulk materials. The device features a menu drive onsite...

Ultrasonic level sensor / chemical-resistant - max. 10 m, -40 °C ... +80 °C | Prosonic FDU91

This compact transmitter is ideal for the quick and simple non-contact level measurements of liquids, pastes and bulk materials. The device features a menu drive onsite...

Ultrasonic level sensor / chemical-resistant - max. 10 m, -40 °C ... +105 °C | Prosonic FDU91F

The Prosonic S FDU91F is a revolutionary product made by Endress+Hauser. It's perfect for rough ambient conditions thanks to separate installation from the transmitter as well...

Ultrasonic level sensor / chemical-resistant - max. 10 m, -40 °C ... +105 °C | Prosonic FDU91F

The Prosonic S FDU91F is a revolutionary product made by Endress+Hauser. It's perfect for rough ambient conditions thanks to separate installation from the transmitter as well as minimizing the build-up the formation due to it's self-cleaning effect. It has a combined temperature sensor for time-of-flight correction and automatical sensor detection for transmitters FMU90/FMU95. It is weather resistant and flood-proof it can also be installed up to 300 m from the transmitter. It also features non-contact measurement method which minimizes service requirements. The FDU91F is also equipped with ultrasonic sensors for non-contact continuous level and flow measurement for connection to transmitter.

Ultrasonic level sensor / chemical-resistant - max. 20 m, -40 °C ... +95 °C | Prosonic FDU92

Endress+Hauser Prosonic S FDU92 ultrasonic sensors are suitable for non-contact measurement of continuous level and flow. It is used for connecting to transmitter FMU90/FMU95.

FDU92 can be set up with ease and requires...

Ultrasonic level sensor / chemical-resistant - max. 20 m, -40 °C ... +95 °C | Prosonic FDU92

Endress+Hauser Prosonic S FDU92 ultrasonic sensors are suitable for non-contact measurement of continuous level and flow. It is used for connecting to transmitter FMU90/FMU95.

FDU92 can be set up with ease and requires minimal servicing. A self-cleaning feature reduces formation of build-up.

It features automatic sensor detection for FMU90/FMU95 sensors. The sensor allows installation up to a 300m distance from the transmitter. Time-of-flight is corrected by built-in temperature sensor.

FDU92 is IP68 rated for weather and flood resistance. Due to the transmitter-independent installation, the sensors can weather challenging conditions. The sensors can measure precisely, even with temperature fluctuations. High resistance to chemical is provided by the PVDF sensor with hermetic welding.

It is available with ATEX, FM, CSA, TIIS, Dust-Ex and Gas-Ex approvals.

Ultrasonic level sensor - max. 25 m, -40 °C ... +95 °C | Prosonic FDU93

Ultrasonic sensors is a Prosonic-manufactured device that functions for continuous and contact-free scheme in gauging fluids, pastes, sludges and other related components. It...

Ultrasonic level sensor - max. 25 m, -40 °C ... +95 °C | Prosonic FDU93

Ultrasonic sensors is a Prosonic-manufactured device that functions for continuous and contact-free scheme in gauging fluids, pastes, sludges and other related components. It is IP68 compliant with high resistance to any weather conditions and tolerance to flooding because of its independent positioning from the transmitter. The device can be used for various integrated sensor capable operations with consideration to temperature. Ultrasonic sensors help provide accurate measurements even when there is variations in temperature. It is designed to accommodate FMU90/FMU95 type of transmitter with optimal distance of 300 meters, and can hold a maximum of 25m fluid and 15m bulk materials.
AFRISO-EURO-INDEX

Ultrasonic level transmitter - 0.2 - 8 m | SonarFox® UST 10

The Afriso's level indicators are designed to measure level of liquid and solid media without...

Ultrasonic level transmitter - 0.2 - 8 m | SonarFox® UST 10

The Afriso's level indicators are designed to measure level of liquid and solid media without coming into contact. These units feature a very high durability, with no need for maintenance, and are capable of built-in flow calculation with up to 32-point linearisation. They are available with an optional switching relay that can perform level contact or flow functions.
{{item.name}}