+7 (812) 645-08-06
Leak detectors, leak testers
select brand
Gas leak detector / portable - 1 000 - 10 000 pm | IAM-10
The IAM-100 Gas Monitor by Bacharach provides simultaneous monitoring operation and versatility at a cost-saving value. Either by itself, or incorporated into a broad detection system, the IAM-100 is...
Gas leak detector / portable - 1 000 - 10 000 pm | IAM-10
The IAM-100 Gas Monitor by Bacharach provides simultaneous monitoring operation and versatility at a cost-saving value. Either by itself, or incorporated into a broad detection system, the IAM-100 is a suitable solution for detecting a range of refrigerants, flammable gases and VOC gas leaks at the lowest possible cost.
Its on-board LEDs illuminate when the sensor is in an alarm state, while the units audible alarm alerts personnel in the area where levels have exceeded the needed limit. The audible alarm can be muted by the on-board silence switch.
It can be used with 110VAC or 220 VAC operations. The unit is especially designed for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms.
Its on-board LEDs illuminate when the sensor is in an alarm state, while the units audible alarm alerts personnel in the area where levels have exceeded the needed limit. The audible alarm can be muted by the on-board silence switch.
It can be used with 110VAC or 220 VAC operations. The unit is especially designed for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms.
Refrigerant gas leak detector / ultrasonic - 0 - 3 500 ppm | MGS-250
The MGS-250 is an infrared refrigerant gas transmitter manufactured by Bacharach. The device provides a cost-effective solution when it comes to detecting various refrigerant without limitations. The NDIR infrared...
Refrigerant gas leak detector / ultrasonic - 0 - 3 500 ppm | MGS-250
The MGS-250 is an infrared refrigerant gas transmitter manufactured by Bacharach. The device provides a cost-effective solution when it comes to detecting various refrigerant without limitations. The NDIR infrared sensor enables accurate low-level leak detection, capable of delivering up to 7 years of maintenance free tool without the need of gas calibrations. This instrument uses an infrared sensing technology that makes the unit unaffected to cross sensitivities to combustible and toxic gas.
The unit is also immune to temperature changes and humidity. It is equipped with an alphanumeric LED display for constant real time readings. The apparatus is also provided with an on-board LED indicator when the sensor is set in alarm mode. An audible alarm alerts the personnel when levels have exceeded the required limit.
The unit is also immune to temperature changes and humidity. It is equipped with an alphanumeric LED display for constant real time readings. The apparatus is also provided with an on-board LED indicator when the sensor is set in alarm mode. An audible alarm alerts the personnel when levels have exceeded the required limit.
Gas leak detector / portable - 0 - 100 000 ppm | MGS-350 series
Bacharach's MGS-350 Series of gas transmitters is available in a broad range of structural housing, and sensor calibration options. This enables real-time monitoring...
Gas leak detector / portable - 0 - 100 000 ppm | MGS-350 series
Bacharach's MGS-350 Series of gas transmitters is available in a broad range of structural housing, and sensor calibration options. This enables real-time monitoring of refrigerant, combustible, TVOC, and toxic gases.
Models of this gas detection system series are equipped with both analog and digital outputs, including 4 to 20 mA, 0 to 5 V, 0 to 10 V, and Serial Data. The output configurations permit direct connection to several BMS, SCADA, and control systems.
When models of the MGS-350 Series are integrated with models of the MGS Series of controllers, they can deliver extensive and economical gas detection capabilities.
Models of this gas detection system series are equipped with both analog and digital outputs, including 4 to 20 mA, 0 to 5 V, 0 to 10 V, and Serial Data. The output configurations permit direct connection to several BMS, SCADA, and control systems.
When models of the MGS-350 Series are integrated with models of the MGS Series of controllers, they can deliver extensive and economical gas detection capabilities.
Gas leak detector / with graphic displays - 0 - 10 000 ppm | HGM-MZ
The Multi-Zone Gas Leak Monitor represents a state-of-the-art product and used to monitor low-level conditions of CFC, HCFC, HFC and ammonia refrigerant gases used in most...
Gas leak detector / with graphic displays - 0 - 10 000 ppm | HGM-MZ
The Multi-Zone Gas Leak Monitor represents a state-of-the-art product and used to monitor low-level conditions of CFC, HCFC, HFC and ammonia refrigerant gases used in most commercial refrigerant systems. The device uses infrared sensing technology which virtually eliminates any false alarms and extends sensor life. The device does not need any calibration. The low detection limits enables early detection of leaks with significant saving of energy and refrigerant consumption. The large Graphic LCD ensures easy set-up and real-time monitoring. The device proves the fastest sampling rate and 1,200 feet of longest sampling distance.
Refrigerant gas leak detector / ultrasonic - 0 - 10 000 ppm | PGM-IR
The PGM-IR is a portable monitor which uses a long-life, non-dispersive infrared sensor technology. It is employed for analyzing and checking low-level gas leaks. The unit can determine small levels...
Refrigerant gas leak detector / ultrasonic - 0 - 10 000 ppm | PGM-IR
The PGM-IR is a portable monitor which uses a long-life, non-dispersive infrared sensor technology. It is employed for analyzing and checking low-level gas leaks. The unit can determine small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air. The results are presented through an LCD display in real time. The data are shown in units of either parts per million (ppm) or elapsed time weighted average (TWA). The unit self-calibrates in 4-minute intervals, thus providing a good zero baseline. This function allows the usage of the monitor in contaminated environments without affecting the readings of the target gas.
Built with an immunity to the changes in temperature and humidity, the machine can cut leak inspection times by 50%.
Built with an immunity to the changes in temperature and humidity, the machine can cut leak inspection times by 50%.
Leak indicator / for tank / double-walled - max. 700 l | LAS series
These Leak Detectors made by the widely known Afriso can be used for aboveground double-walled tanks that contain flammable and non-flammable liquids and water-polluting...
Leak indicator / for tank / double-walled - max. 700 l | LAS series
These Leak Detectors made by the widely known Afriso can be used for aboveground double-walled tanks that contain flammable and non-flammable liquids and water-polluting liquids. This one of a kind technology is made of a transparent acrylic glass cylinder, stainless steel housing covers and bottoms and these materials were specifically chosen to guarantee exceptional durability and longer service life. This met the technical approval from the highly remarkable German Institute for Building Technology Z-65.24-381 which means that this technology is the top of the line. It also met the atmospheric conditions for steel tanks in accordance to the DIN 6618-3.
Leak detector - -10 °C ... +60 °C | LAG-13 K
Making tanks safe, Afriso leak detectors, leak monitoring systems,...
Leak detector - -10 °C ... +60 °C | LAG-13 K
Making tanks safe, Afriso leak detectors, leak monitoring systems, inner tank linings and alarm units have approved applications as per German WHG/AwSV and BetrSichV version. The double-walled tanks are good for monitoring of above-ground.
Leak detector - -10 °C ... +60 °C | LAG-14 ER
ATEX approval
Version as per German WHG/AwSV
and BetrSichV
For monitoring of aboveground,
double-walled tanks
Version as per German WHG/AwSV
and BetrSichV
For monitoring of aboveground,
double-walled tanks
Vacuum leak detector - -25 °C ... +50 °C, -60 ... -85 mbar | Eurovac NV
The EuroVac NV is created to detect leak in processing plants. Designed and develop...
Vacuum leak detector - -25 °C ... +50 °C, -60 ... -85 mbar | Eurovac NV
The EuroVac NV is created to detect leak in processing plants. Designed and develop by AFRISO, and integrated with high performance DC motors with high starting torque. Different functional buttons to serve as switching output and acknowledge button, with visual and audible alarms. Its equipped with service indicator for maintenance.
Vacuum leak detector - -25 °C ... +50 °C, -400 mbar | Eurovac HV
The leak detectors, leak monitoring systems and inner tank linings and alarm units...
Vacuum leak detector - -25 °C ... +50 °C, -400 mbar | Eurovac HV
The leak detectors, leak monitoring systems and inner tank linings and alarm units are all designed by AFRISO. They are all equipped with power failure monitoring options as well as service-indicators. The devices also feature DC motor with high starting torque. It is designed to be economical in energy usage.
Flammable gas leak detector / portable - 0-10 000 ppm | FG 110
The FG 110, which is manufactured by Kimo, is a gas leak detector that has been developed to provide efficient,...
Flammable gas leak detector / portable - 0-10 000 ppm | FG 110
The FG 110, which is manufactured by Kimo, is a gas leak detector that has been developed to provide efficient, and reliable quality performance. It has a compact design, and is integrated with a versatile probe, min-max-hold operation, and a changeable automatic shut-off function. It has an IP54 protected housing constructed out of ABS. It detects gases such as methane, LPG, and other varieties of combustible gas.
Refrigerant gas leak detector / portable - HCFC, HFC, H2 | DF 110
This device is utilized to detect refrigerant gases and hydrogen. It has a flexible...
Refrigerant gas leak detector / portable - HCFC, HFC, H2 | DF 110
This device is utilized to detect refrigerant gases and hydrogen. It has a flexible probe, three modes of sensibility, IB54 ABS housing, and both manual and automatic auto-zero.
It is able to detect all HCFC and HFC refrigerants and is able to detect mixtures of 5% hydrogen to 95% nitrogen (Nitron 5, ...).
It is able to detect all HCFC and HFC refrigerants and is able to detect mixtures of 5% hydrogen to 95% nitrogen (Nitron 5, ...).