+7 (812) 645-08-06
Impedance measuring devices
select brand
Earth impedance tester - C.A 6472
Chauvin Arnoux boasts of having one of a kind, hand-held, field and laboratory test and measurements instruments. The CA 6472 stands out from its competition because it has 5 tools in 1 tester....
Earth impedance tester - C.A 6472
Chauvin Arnoux boasts of having one of a kind, hand-held, field and laboratory test and measurements instruments. The CA 6472 stands out from its competition because it has 5 tools in 1 tester. It also guarantees reliable and exceptionally accurate measurements thorugh the use of traditional rod methods. It also has an extensive measurement ranges from 0.001 W to 100 kW and it can also analyze the frequence behavior of earthing systems from 41Hz to 5kHz. Each unit comes with a high-quality and expert calculation capabilities. It can measure soil resistivity by programming the distances used for the measurement and the tester will calculate using the Wenner or Schlumberger method. This remarkable technology can also measure earth coupling as well.
Loop tester - Cat III, 600V | C.A 6454
This loop tester is innovative and user-friendly, the C.A 6454, which is easy to use and offers enhanced metrological performance for testing installations. It is compliant to European and International standards NF C 15-100, IEEE, VDE 0100, NIN/NIV, ÖVE...
Loop tester - Cat III, 600V | C.A 6454
This loop tester is innovative and user-friendly, the C.A 6454, which is easy to use and offers enhanced metrological performance for testing installations. It is compliant to European and International standards NF C 15-100, IEEE, VDE 0100, NIN/NIV, ÖVE...
Earth impedance tester - 600 V, CAT IV | C.A 6416, C.A 6417
The C.A 6416 and C.A 6417 are ground resistance testers that easily perform tests earth loops in a safe manner. They are designed for regular use and requires a minimal effort in operating....
Earth impedance tester - 600 V, CAT IV | C.A 6416, C.A 6417
The C.A 6416 and C.A 6417 are ground resistance testers that easily perform tests earth loops in a safe manner. They are designed for regular use and requires a minimal effort in operating....
Earth impedance tester - 20 - 2 000 Ω | 309
The model 309 Digital Earth Resistance Meter (Earth Ground Meter) is a professional meter that is compact in size. The small, battery powered meter is easy to use and is invaluable to contractors and electricians who need to check...
Earth impedance tester - 20 - 2 000 Ω | 309
The model 309 Digital Earth Resistance Meter (Earth Ground Meter) is a professional meter that is compact in size. The small, battery powered meter is easy to use and is invaluable to contractors and electricians who need to check the 'ground' quality and effectiveness of structures, building, electrical systems and equipment.
New buildings and structures require a good earth ground in order to pass the required electrical codes. Over time, older buildings can lose a good, effective earth ground connection which can happen after a structure or building has been struck by lightning.
The meter can measure earth resistance in 20/200/2000 ohm ranges and earth AC voltage to 200VAC (40 to 599Hz). The output is turned off after a 3 to 5 min continuous test with a timed function test. Resistance can be measured without tripping the circuit breakers with the 2mA measuring current.
New buildings and structures require a good earth ground in order to pass the required electrical codes. Over time, older buildings can lose a good, effective earth ground connection which can happen after a structure or building has been struck by lightning.
The meter can measure earth resistance in 20/200/2000 ohm ranges and earth AC voltage to 200VAC (40 to 599Hz). The output is turned off after a 3 to 5 min continuous test with a timed function test. Resistance can be measured without tripping the circuit breakers with the 2mA measuring current.
Loop tester - 990DSL CopperPro™ Series II
CopperPro Series II represents a state of the art set of tools for a range of applications such as cable troubleshooting, fault locating, testing...
Loop tester - 990DSL CopperPro™ Series II
CopperPro Series II represents a state of the art set of tools for a range of applications such as cable troubleshooting, fault locating, testing and qualification of capabilities. This compact, hand-held device is equipped with a variety of additional features like the broadband noise identification for VDSL, an advanced TDR that enables easy locating of short bridge taps in addition to other impairments that can cause problems with VDSL, and a VDSL modem, that is available as an optional add-on, enabling confirmation of performance and connectivity.
Loop tester - CopperPro Terminator™
The CopperPro family of loop testers from Fluke Networks packs a total combination of test and troubleshooting capabilities into one rugged and integrated tool for OSP technicians. Now,...
Loop tester - CopperPro Terminator™
The CopperPro family of loop testers from Fluke Networks packs a total combination of test and troubleshooting capabilities into one rugged and integrated tool for OSP technicians. Now, its capabilities have been expanded even further with Terminator, which is an accessory module to the 990DSL CopperPro that lets you perform terminated transmission testing Quickly, Easily, Single-handedly.
Both the CopperPro and Terminator are a major advance in qualifying and troubleshooting copper access network circuits, including HDSL2/4. It offers complete and effective solution for reducing failure frequency, repeats, and chronic problems with special services circuits and remains unbeatable in the industry.
Both the CopperPro and Terminator are a major advance in qualifying and troubleshooting copper access network circuits, including HDSL2/4. It offers complete and effective solution for reducing failure frequency, repeats, and chronic problems with special services circuits and remains unbeatable in the industry.