+7 (812) 645-08-06
Current measuring devices
select brand
DC clamp ammeter / AC - PAC 20, 21, 22
CHAUVIN ARNOUX PAC 20, 21 and 22 are professional AC/DC ammeter clamps.
The PAC 2x series is based on the principle of hall-effect. It allows measurement of up to 1,400A DC and 1,000A AC.
The PAC series are used for power...
The PAC 2x series is based on the principle of hall-effect. It allows measurement of up to 1,400A DC and 1,000A AC.
The PAC series are used for power...
DC clamp ammeter / AC - PAC 20, 21, 22
CHAUVIN ARNOUX PAC 20, 21 and 22 are professional AC/DC ammeter clamps.
The PAC 2x series is based on the principle of hall-effect. It allows measurement of up to 1,400A DC and 1,000A AC.
The PAC series are used for power measurement. It also allows measurement of true RMS with DC components.
PAC 20 has an input of 0.5...1,000A AC / 0.5...1,400A DC, output of 1.4V AC/DC, ratio of 1A/1mV, and a potentiometer for resetting to zero.
PAC 21 has an input of 0.2...100A AC / 0.4...150A DC / 0.5...1,000A AC / 0.5...1,400A DC. It has an output of 1.4V AC/DC and ratio of 1A/10mV / 1A/1mV. It has an automatic zero reset feature.
PAC 22 clamp featuring a BNC connector has an input of 0.2...150A peak / 0.4...150A DC / 0.5...1,400A peak / 0.5...1,400A peak. It has an output of 1.4V AC/DC and a ratio of 1A/10mV / 1A/1mV with auto zero reset. The BNC connector can be used for taking measurements on oscilloscopes and devices.
The PAC 2x series is based on the principle of hall-effect. It allows measurement of up to 1,400A DC and 1,000A AC.
The PAC series are used for power measurement. It also allows measurement of true RMS with DC components.
PAC 20 has an input of 0.5...1,000A AC / 0.5...1,400A DC, output of 1.4V AC/DC, ratio of 1A/1mV, and a potentiometer for resetting to zero.
PAC 21 has an input of 0.2...100A AC / 0.4...150A DC / 0.5...1,000A AC / 0.5...1,400A DC. It has an output of 1.4V AC/DC and ratio of 1A/10mV / 1A/1mV. It has an automatic zero reset feature.
PAC 22 clamp featuring a BNC connector has an input of 0.2...150A peak / 0.4...150A DC / 0.5...1,400A peak / 0.5...1,400A peak. It has an output of 1.4V AC/DC and a ratio of 1A/10mV / 1A/1mV with auto zero reset. The BNC connector can be used for taking measurements on oscilloscopes and devices.
Clamp ammeter - 500 µA - 400 A | B102
This B102 Clamp model offers measurement and calculation of leakage currents directed towards the earth. It is particularly useful in locating power circuits' low fault currents; however, it also...
Clamp ammeter - 500 µA - 400 A | B102
This B102 Clamp model offers measurement and calculation of leakage currents directed towards the earth. It is particularly useful in locating power circuits' low fault currents; however, it also...
Current transducer - T82 Enerdis
These transducers are capable of converting AC currents into reduced levels mA or V Dc analogue signals via a basic calibre output. They are generally placed upwards of the digital or analogue panel meters, recorders,...
Current transducer - T82 Enerdis
These transducers are capable of converting AC currents into reduced levels mA or V Dc analogue signals via a basic calibre output. They are generally placed upwards of the digital or analogue panel meters, recorders, configurable logic controllers, etc. There are programmable upon request and feature transfer function, input current, output signal,etc. This most used configurations are pre encoded and are listed below.
These include 2 KV insulation, 300 ms response time, 0.5 < In current input < 10A, 0…Xmax with: In < Xmax < 1.3In (on CT) or Xmax = In (direct) measuring range, 0-10mA, 0-20mA, 4-20mA analogue input, ability to measure in all 4 quadrants, IP20 protection rating (IP50, IP54, IP55 and tropicalized on request, Fixed T82: 70x125x122 mm and Plug-in T82: 60x115x159 mm presentation.
These include 2 KV insulation, 300 ms response time, 0.5 < In current input < 10A, 0…Xmax with: In < Xmax < 1.3In (on CT) or Xmax = In (direct) measuring range, 0-10mA, 0-20mA, 4-20mA analogue input, ability to measure in all 4 quadrants, IP20 protection rating (IP50, IP54, IP55 and tropicalized on request, Fixed T82: 70x125x122 mm and Plug-in T82: 60x115x159 mm presentation.
AC current tester - 600 V, CAT IV | MA 400D , MA 4000D
The DigiFlex current testers are user-friendly and easy to setup devices that are ideal for applications needing direct current readings. It comes with integrated,...
AC current tester - 600 V, CAT IV | MA 400D , MA 4000D
The DigiFlex current testers are user-friendly and easy to setup devices that are ideal for applications needing direct current readings. It comes with integrated, flexible sensors connected to a compact casing that can be conveniently utilized for electrical cabinet applications up to 600 V CAT IV. These instruments can display 4,000-count digital readings and can operate on its own. It features a sensor-closing system and uses the magnetized Multifix mounting system that permits easy positioning of the device. It is also easy to store and keep thanks to the built-in strap. Users can get accurate measurement and instantly get results.
AC clamp ammeter - max. 1 000 A | 330A
This 330B AC Current Clamp Meter is capable of measuring AC currents of...
AC clamp ammeter - max. 1 000 A | 330A
This 330B AC Current Clamp Meter is capable of measuring AC currents of up to 1000A, AC voltage to 750V and DC voltage to 1000V. It has a 2.24 inch jaw opening and a 3 3/4 digit, 2000 count display. It is also resistant to 2000M ohms. It also features an indicator when the battery is low.
Current sensor - 15 A | 301
The Model 301 series of AC Line Separators from BK PRECISION is used with an AC Current Clamp Meter to separate conductors needed for current...
Current sensor - 15 A | 301
The Model 301 series of AC Line Separators from BK PRECISION is used with an AC Current Clamp Meter to separate conductors needed for current measurement. The 2 conductor measurement, on the other hand, cancels the measurements out. It employs an X10 mode that provides more accurate measurements on devices with low amperes. It also allows direct reading in the X1 mode. The unit can handle up to 15 amperes, and the Voltmeter utilizes 2-millimeter measurement points. Moreover, it comes with a 3-prong standard plug which acts as a ground conductor.
Current probe - 701928
With a frequency bandwidth to 100MHz and a maximum continuous input range of 30 Arms, this item comes with basic specifications, which are very similar to those of the 701932 model....
Current probe - 701928
With a frequency bandwidth to 100MHz and a maximum continuous input range of 30 Arms, this item comes with basic specifications, which are very similar to those of the 701932 model....
AC clamp ammeter - CL120
Yokogawa Mini Clamp-on Tester for AC Current #CL120 is a compact and lightweight...
AC clamp ammeter - CL120
Yokogawa Mini Clamp-on Tester for AC Current #CL120 is a compact and lightweight...
Clamp ammeter - CL320
When it comes to leakage current measurement with a range between 20mA and 200A, this device does its job properly and has almost...
Clamp ammeter - CL320
When it comes to leakage current measurement with a range between 20mA and 200A, this device does its job properly and has almost...
Galvanometer - 2707
Model 2707 is a transistorized battery-powered electronic galvanometer that boasts a small footprint. This makes the instrument...
Galvanometer - 2707
Model 2707 is a transistorized battery-powered electronic galvanometer that boasts a small footprint. This makes the instrument...