+7 (812) 645-08-06
Air quality monitoring devices
select brand
Air quality meter indoor / IAQ - 0 - 5 000 ppm | Comfort Chek™ 400
The Comfort Chek® 400 is a cost-effective, easy-to-use indoor air quality (IAQ) monitor from Bacharach, which is constructed with three sensors that...
Air quality meter indoor / IAQ - 0 - 5 000 ppm | Comfort Chek™ 400
The Comfort Chek® 400 is a cost-effective, easy-to-use indoor air quality (IAQ) monitor from Bacharach, which is constructed with three sensors that...
Air quality meter indoor / IAQ - 0 - 10 000 ppm | IEQ Chek™
The Bacharach’s IEQ Chek™ is a flexible and portable device that features a 7-sensor scope. It is best suitable for indoor quality of environment. It has an on-board sensors for...
Air quality meter indoor / IAQ - 0 - 10 000 ppm | IEQ Chek™
The Bacharach’s IEQ Chek™ is a flexible and portable device that features a 7-sensor scope. It is best suitable for indoor quality of environment. It has an on-board sensors for temperature and relative humidity of up to 5 additional plug-and-play ‘smart’ sensors like carbon dioxide (CO2), carbon monoxide (CO), oxygen (O2), formaldehyde (HCHO), total volatile organic compounds (TVOCs), nitrogen dioxide (NO2), sulfur dioxide (SO2), ammonia (NH3), hydrogen sulfide (H2S) and combustible gases. It's also equipped with a gargantuan multi-line LCD back lit display, an over one million data capacity with SD flash card, and an alternative data download kit with USB connection to PC and IQ Chek™ software.
CEMS monitoring system / emissions / continuous - RS 485
The Land continuous emissions monitoring backup system reduces downtime data. It assures that...
CEMS monitoring system / emissions / continuous - RS 485
The Land continuous emissions monitoring backup system reduces downtime data. It assures that standard requirement with regards to restrictions on data availability are met, as part of its operating permit.
This CEM is a compact and inexpensive workstation that has the capability to last for a long period of time until the system goes back on-line.
This CEM is a compact and inexpensive workstation that has the capability to last for a long period of time until the system goes back on-line.
Monitoring device / dust concentration and opacity - 520 ±20 nm, max. 10 000 mg/m³ | 4500 MkIII
Equipped with a Flood LED light source, the Land Model 4500 MkIII is designed with a user-friendly interface that can be easily set up. Following...
Monitoring device / dust concentration and opacity - 520 ±20 nm, max. 10 000 mg/m³ | 4500 MkIII
Equipped with a Flood LED light source, the Land Model 4500 MkIII is designed with a user-friendly interface that can be easily set up. Following the standards of ASTM Standard B 62161, it features a retro-reflector that can be operated single-handedly with its controllable keypad and display, providing accurate measurements of dust concentration. The 4500 MkIII's dual function menus house an audit jig and adapter flanges, and also comes with air purging supplementary tools for improved user convenience that can be used in a wide range of applications.
Dust emissions monitoring device - max. 600 °C, max. 999 mg/m³ | 4200
The Model 4200 from Land is a Non-Compliance Dust Emissions Monitor ideally used for measuring...
Dust emissions monitoring device - max. 600 °C, max. 999 mg/m³ | 4200
The Model 4200 from Land is a Non-Compliance Dust Emissions Monitor ideally used for measuring emissions from industrial processes, and is suitable with multiprocess plants with common exhaust stacks. It can report measurements in Opacity or mg/m3, and it has a wide range of optional accessories. Moreover, it comes with a simple keypad operation.
CEMS monitoring system / emissions / continuous - 71 x 24 x 32 in. | GMP 1000M
The pre-packaged GMP 1000M CEMS Cabinet makes use of field-proven analyzer technology to come up with the most strongly built and highly dependable sample extraction and conditioning systems in the world. These are manufactured according...
CEMS monitoring system / emissions / continuous - 71 x 24 x 32 in. | GMP 1000M
The pre-packaged GMP 1000M CEMS Cabinet makes use of field-proven analyzer technology to come up with the most strongly built and highly dependable sample extraction and conditioning systems in the world. These are manufactured according to ISO 9001 standards. The device is fitted with an MLT multi-component analyzer, namely MLT 1, MLT 3, or MLT 4. By making use of a combination of visible spectroscopy (VIS), ultraviolet (UV) and/or electrochemical or paramagnetic oxygen sensor, the device can successfully measure up to five components at the same time, including O2, CO, CO2, SO2, and NOx. Another advantage of the device is that it can be used as the main interface for a flame ionization (FID) module for hydrocarbon measurements. It can also be used as a chemiluminescence (CLD) module for NOx measurements. Additionally, it is possible to integrate OPM 4000 opacity dust density monitor to comply with regulations such as EPA.
Monitoring device / dust concentration and opacity - 400 - 700 nm | OPM 4001
The Rosemount Analytical OPM 4001 (EPA Yielding) model of opacity dust density monitors by Emerson...
Monitoring device / dust concentration and opacity - 400 - 700 nm | OPM 4001
The Rosemount Analytical OPM 4001 (EPA Yielding) model of opacity dust density monitors by Emerson utilizes tried-and-tested circuitry and optic which are simple yet highly precise. This top-operating opacity auditing mechanism (with a dual-pass transmissiometer) features high quality components, which have all been individually and collectively tested for the optimal usage output.
Monitoring device / dust concentration and opacity - 400 - 700 nm | OPM 3000
Emerson's Rosemount Analytical OPM 3000 Opacity Dust Density Monitor stackmounting transmissometer sensor system includes a retro...
Monitoring device / dust concentration and opacity - 400 - 700 nm | OPM 3000
Emerson's Rosemount Analytical OPM 3000 Opacity Dust Density Monitor stackmounting transmissometer sensor system includes a retro reflector mounted on one side of the stack and an optical transceiver on the other. The OPM 3000 ratio measurement technique gives incessant automatic compensation to secure prolonged instrument stability and precision for variations in light source intensity. The OPM 3000 is unaffected by light source aging due to its insensitivity to the absolute intensity of the light source.
Airborne particle monitoring device / for smoke and oil mist detection - 2 W, 24 VDC | Millennium APM
The Millennium Oil Mist Detector with Air Particle Monitor (APM) features a Class 1, Division 1 rated for industrial and hazardous locations with a sensor performance not effected by air velocity and a less than 2...
Airborne particle monitoring device / for smoke and oil mist detection - 2 W, 24 VDC | Millennium APM
The Millennium Oil Mist Detector with Air Particle Monitor (APM) features a Class 1, Division 1 rated for industrial and hazardous locations with a sensor performance not effected by air velocity and a less than 2...