+7 (812) 645-08-06
Drilling equipment
select brand
Joint machine veneer strip finger - 6 - 30 mm | VS 600 GE
The Festool VS 600-GE is an adaptable basic unit jointing system ideally used for...
Joint machine veneer strip finger - 6 - 30 mm | VS 600 GE
The Festool VS 600-GE is an adaptable basic unit jointing system ideally used for professional timber joints in hard and soft wood. This efficient instrument offers interchangeable templates, accurate results, reliability and long service life. It features a maximum workpiece length of 650 mm and 6 - 30 mm thickness.
Piling drilling rig / hydraulic - ø 1 800 - 2 500 mm, max. 77 m | SR-75
Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
The hydraulic drilling rig SR-75 has been specially designed for suiting the following applications:
- LDP cased bore piles with casing...
The hydraulic drilling rig SR-75 has been specially designed for suiting the following applications:
- LDP cased bore piles with casing...
Piling drilling rig / hydraulic - ø 1 800 - 2 500 mm, max. 77 m | SR-75
Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
The hydraulic drilling rig SR-75 has been specially designed for suiting the following applications:
- LDP cased bore piles with casing...
The hydraulic drilling rig SR-75 has been specially designed for suiting the following applications:
- LDP cased bore piles with casing...
Micropile drilling rig - 105 kW | SM-9
The SM-9 is a multipurpose drilling rig. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain,...
Micropile drilling rig - 105 kW | SM-9
The SM-9 is a multipurpose drilling rig. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain,...
Piling drilling rig / hydraulic - max. ø 2 000 mm, max. 63 m | SR-45
Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
The hydraulic drilling rig SR-45 has been specially designed for suiting the following applications:
-...
The hydraulic drilling rig SR-45 has been specially designed for suiting the following applications:
-...
Piling drilling rig / hydraulic - max. ø 2 000 mm, max. 63 m | SR-45
Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
The hydraulic drilling rig SR-45 has been specially designed for suiting the following applications:
-...
The hydraulic drilling rig SR-45 has been specially designed for suiting the following applications:
-...
Micropile drilling rig - 115 kW | SM-4
SM-4 is a new drilling machine featuring a separate power pack and the same movements of its larger...
Micropile drilling rig - 115 kW | SM-4
SM-4 is a new drilling machine featuring a separate power pack and the same movements of its larger sister, the SM-5. It has two different engine sizes available: 115 kW and 110 kW respectively (diesel and electrical).
Among the many options the most interesting one is certainly the LHR kit (Low Head Room) suitable for 600 mm diameters auger drilling, with cased pilot hole.
Among the many options the most interesting one is certainly the LHR kit (Low Head Room) suitable for 600 mm diameters auger drilling, with cased pilot hole.
Geothermal drilling rig / hydraulic - 119 kW | SM-10GT
The new SM-10GT is a hydraulic drilling rig designed specifically for geothermal drilling.
The fixed kinematic mechanism, wide section mast, and the pull-push system with a 120 kN hydraulic...
The fixed kinematic mechanism, wide section mast, and the pull-push system with a 120 kN hydraulic...
Geothermal drilling rig / hydraulic - 119 kW | SM-10GT
The new SM-10GT is a hydraulic drilling rig designed specifically for geothermal drilling.
The fixed kinematic mechanism, wide section mast, and the pull-push system with a 120 kN hydraulic cylinder means drilling deep, precise bores.
The rubber tracked undercarriage and low specific pressure on the ground make this machine ideal for operating in gardens and private courtyards, typical in this kind of application, reducing the impact of the site.
The drilling rig has a hydraulic clamp and breaker suitable for breaking drilling rods and an additional support for manoeuvres during feeding and recovery of the casings.
The drilling battery loading (rods and casings) is fast and safe thanks to a special winch system with magnetic lifting
The fixed kinematic mechanism, wide section mast, and the pull-push system with a 120 kN hydraulic cylinder means drilling deep, precise bores.
The rubber tracked undercarriage and low specific pressure on the ground make this machine ideal for operating in gardens and private courtyards, typical in this kind of application, reducing the impact of the site.
The drilling rig has a hydraulic clamp and breaker suitable for breaking drilling rods and an additional support for manoeuvres during feeding and recovery of the casings.
The drilling battery loading (rods and casings) is fast and safe thanks to a special winch system with magnetic lifting