Compaction equipment

select brand


Ammann

Rammer - 62 kg | ACR 60

Rammers Ammann rammers are capable, financial, administrator inviting and ergonomic in outline - in short, the perfect compaction machine for your construction venture. Whether trench development, refilling, sub-layer compaction for storm cellars and mechanical structures or repair chip away...

Rammer - 62 kg | ACR 60

Rammers Ammann rammers are capable, financial, administrator inviting and ergonomic in outline - in short, the perfect compaction machine for your construction venture. Whether trench development, refilling, sub-layer compaction for storm cellars and mechanical structures or repair chip away at streets and pathways: Ammann rammers can adapt to the hardest conditions.

Available in 2 models, where both models are portrayed by unwavering quality, high compaction execution, simple serviceability, a low middle of gravity and high power holds. These properties give fatigue-free work even in the most troublesome soil conditions. It is featured with elastically backed handles for exhaustion free operation, extra rollers and handles for simple stacking and emptying, sure-hold, vibration-protected handle.

It is also equipped with an anti-corrosion fuel tank, powerful single-spring framework, recoil starter that is accessible easily, throttle conformity with programmed unmoving, integrated, super-sized fine work air channel that is simple to clean, a robust wrench drive, a wear-safe smashing shoe that is made of excellent plastic.

Rammer - 68 kg | ACR 68

This is an ACR 68 is a compact rammer having an operating width of about 280mm....

Rammer - 68 kg | ACR 68

This is an ACR 68 is a compact rammer having an operating width of about 280mm....

Rammer - 83 kg | ACR 70 D

Ammann ACR 70 D rammers have an operating width of 280 mm. They have an operating weight of 83 kg as...

Rammer - 83 kg | ACR 70 D

Ammann ACR 70 D rammers have an operating width of 280 mm. They have an operating weight of 83 kg as...

Vibratory plate - 54 kg | APF 1033 Honda

The APF 1033 by Ammann is a forward moving vibratory plate that weighs 54kg (119...

Vibratory plate - 54 kg | APF 1033 Honda

The APF 1033 by Ammann is a forward moving vibratory plate that weighs 54kg (119...

Vibratory plate - 70 kg | APF 1240 Honda+Subaru

The forward moving vibratory plate has an operating width of 400 mm, a surface area output of 0.14...

Vibratory plate - 70 kg | APF 1240 Honda+Subaru

The forward moving vibratory plate has an operating width of 400 mm, a surface area output of 0.14...
Ingersoll Rand

Rammer - 870 bpm | 130A1M-EU

The 120A1M is a bench sand rammer manufactured by Ingersoll. This rammer is suitable...

Rammer - 870 bpm | 130A1M-EU

The 120A1M is a bench sand rammer manufactured by Ingersoll. This rammer is suitable for compacting small sand molds in a foundry or casting facility. Furthermore, it has a double action sand-wiper seal that restricts dirt and grit to penetrate inside the tool. This in turn makes it capable of withstanding in long service of operation.

Rammer - 1 590 bpm | 241A1M-EU

This floor sand rammer from INGERSOLL RAND has a wide working envelope...

Rammer - 1 590 bpm | 241A1M-EU

This floor sand rammer from INGERSOLL RAND has a wide working envelope and is a heavier unit than the bench model. It is easily used at an upright position when dealing with large molds at floor levels. The front end is also sealed so that the unit does not accumulate dirt and dust.
Guidetti S.r.l.

Dual-fuel roller - 200S

Compactor 200S is been mainly manufactured for compacting roads backgrounds....

Dual-fuel roller - 200S

Compactor 200S is been mainly manufactured for compacting roads backgrounds. Its high working speed and centrifugal force together with the uncommon ability to climb grade ability, make it the most ideal machines to build mountain roads and factory yards too.

Tandem roller / articulated - 114

Guidetti’s rollers have been mainly produced for resurfacing....

Tandem roller / articulated - 114

Guidetti’s rollers have been mainly produced for resurfacing. Their high working speed and centrifugal force together with the uncommon ability to climb grade ability, make them the most ideal machines to build mountain roads and factory yards too.

Tandem roller / articulated - 25V

Guidetti’s rollers have been mainly produced for resurfacing....

Tandem roller / articulated - 25V

Guidetti’s rollers have been mainly produced for resurfacing. Their high working speed and centrifugal force together with the uncommon ability to climb grade ability, make them the most ideal machines to build mountain roads and factory yards too.

Tandem roller / articulated - 40V

Guidetti’s rollers have been mainly produced for resurfacing....

Tandem roller / articulated - 40V

Guidetti’s rollers have been mainly produced for resurfacing. Their high working speed and centrifugal force together with the uncommon ability to climb grade ability, make them the most ideal machines to build mountain roads and factory yards too.
{{item.name}}