+7 (812) 645-08-06
Generator set controllers
select brand
Generator controller - GC315
GC315
Automatic Mains Failure microprocessor based genset controller for the most common three-phases generator applications
Available in three versions: GC315 - GC315Plus - GC315Link (coming soon)
Remote control systems
True RMS readings on generator and...
Automatic Mains Failure microprocessor based genset controller for the most common three-phases generator applications
Available in three versions: GC315 - GC315Plus - GC315Link (coming soon)
Remote control systems
True RMS readings on generator and...
Generator controller - GC315
GC315
Automatic Mains Failure microprocessor based genset controller for the most common three-phases generator applications
Available in three versions: GC315 - GC315Plus - GC315Link (coming soon)
Remote control systems
True RMS readings on generator and mains voltages and currents. Neutral measure included.
Active, Reactive and apparent power measurement
Frequency and power measurement on Mains input
Engine speed measurement by pick-up or W
8+3 fully programmable digital input and 8 digital output (6 programmable)
Additional current measurement for neutral or ground fault protection (51N)
Graphic display with self or manual adjustable contrast based on the temperature
Insulated and Auto-supplied J1939 and MTU MDEC CAN interface
USB serial port
RS232 serial port with MODBUS RTU protocol
RS485 serial port with MODBUS RTU protocol
Ethernet interface with MODBUS TCP/IP protocol
GPRS Modem
Possible connection to the software SI.MO.NE.
Real Time Clock with battery
Events and data logging
Free SICES Supervisor
Automatic Mains Failure microprocessor based genset controller for the most common three-phases generator applications
Available in three versions: GC315 - GC315Plus - GC315Link (coming soon)
Remote control systems
True RMS readings on generator and mains voltages and currents. Neutral measure included.
Active, Reactive and apparent power measurement
Frequency and power measurement on Mains input
Engine speed measurement by pick-up or W
8+3 fully programmable digital input and 8 digital output (6 programmable)
Additional current measurement for neutral or ground fault protection (51N)
Graphic display with self or manual adjustable contrast based on the temperature
Insulated and Auto-supplied J1939 and MTU MDEC CAN interface
USB serial port
RS232 serial port with MODBUS RTU protocol
RS485 serial port with MODBUS RTU protocol
Ethernet interface with MODBUS TCP/IP protocol
GPRS Modem
Possible connection to the software SI.MO.NE.
Real Time Clock with battery
Events and data logging
Free SICES Supervisor
Automatic control panel for generator sets - DST2600
The DST2600 is part of Sices' product line of electric control panels. This compact gen-set controller...
Automatic control panel for generator sets - DST2600
The DST2600 is part of Sices' product line of electric control panels. This compact gen-set controller features all functions of a standard gen-set standby unit. It showcases an integrated engine and generator safeguard protocols, contractors for power transport operations, and a battery charge maintainer. It also sports power relays for engine control uses, and a measurement system and display.
Microprocessor control panel for generator sets - 7 - 32 VDC, 3 W | DST4400
The DST 4400 is a microprocessor gen set controller....
Microprocessor control panel for generator sets - 7 - 32 VDC, 3 W | DST4400
The DST 4400 is a microprocessor gen set controller. It is installed in an AMF control panel used to manage and protect the gen set. An RS232/485 converter and GSM modem, etc. may be added to modify the panel.
Control panel for generator sets - ATS panel (BASIC / LOGICA)
The Sices Automatic Transfer Switch (ATS) control panel aides automatic switching between mains power and genset supply, in case of mains failure, and features all circuitry, devices, and controls to enable...
Control panel for generator sets - ATS panel (BASIC / LOGICA)
The Sices Automatic Transfer Switch (ATS) control panel aides automatic switching between mains power and genset supply, in case of mains failure, and features all circuitry, devices, and controls to enable smooth switching. ATS is available in two versions, BASIC and LOGICA.
The BASIC version is coupled to a genset control panel and has a manual switch selector with 4 options – Automatic, 0, Mains, and Genset. The control panel comes with fuse protection, terminal board, and a light display indicating the power source (mains/genset).
The LOGICA version comes with a GC310 microprocessor-based controller and handles switching between mains and genset automatically. It also features an advanced display that meters the output and battery voltage, supply frequency and working duration.
The BASIC version is coupled to a genset control panel and has a manual switch selector with 4 options – Automatic, 0, Mains, and Genset. The control panel comes with fuse protection, terminal board, and a light display indicating the power source (mains/genset).
The LOGICA version comes with a GC310 microprocessor-based controller and handles switching between mains and genset automatically. It also features an advanced display that meters the output and battery voltage, supply frequency and working duration.
Control panel for generator sets
The control board shop, with the technical department’s designing support, provides a...
Control panel for generator sets
The control board shop, with the technical department’s designing support, provides a...
Automatic control panel for generator sets - G2, G3 series
G2 series: Control boards with microchip GM 2000. Digital instrumentation....
Automatic control panel for generator sets - G2, G3 series
G2 series: Control boards with microchip GM 2000. Digital instrumentation. Wide range of control and signalling systems. G3 series: Control system based on microchip G3 CPU and on remote board G3 Panel. Digital instrumentation. Internal interface for remote control.
Parallel control panel for generator sets - GS series
Control system and control of parallel systems for n generating sets. Programmable...
Parallel control panel for generator sets - GS series
Control system and control of parallel systems for n generating sets. Programmable PLC. Possibility of connection to plant Master systems. With the Net solution it is possible to have power parallels with the main network both temporarily and permanently according to DK 5940 requirements.