+7 (812) 645-08-06
Counters, totalizers
select brand
Analog position indicator - DD51
Features and applications
Direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven applications (see "Table of the possible combinations").
Ergonomy and design
Compact roller counter, ergonomically designed digits for...
Direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven applications (see "Table of the possible combinations").
Ergonomy and design
Compact roller counter, ergonomically designed digits for...
Analog position indicator - DD51
Features and applications
Direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven applications (see "Table of the possible combinations").
Ergonomy and design
Compact roller counter, ergonomically designed digits for...
Direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven applications (see "Table of the possible combinations").
Ergonomy and design
Compact roller counter, ergonomically designed digits for...
Analog position indicator - DD52
Features and applications
Lowered direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven...
Lowered direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven...
Analog position indicator - DD52
Features and applications
Lowered direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven...
Lowered direct drive digital position indicators can be assembled on passing through spindles in any position to give direct reading of the positioning of a machine component. They are suitable also for motor driven...
Digital absolute position indicator - DD51-E
DD51-E position indicators, with battery power supply, can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component.
The 5-digit display of 8,0 mm height ensures excellent readability even from a distance and from different viewing angles.
The window in transparent technopolymer protects the LCD...
The 5-digit display of 8,0 mm height ensures excellent readability even from a distance and from different viewing angles.
The window in transparent technopolymer protects the LCD...
Digital absolute position indicator - DD51-E
DD51-E position indicators, with battery power supply, can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component.
The 5-digit display of 8,0 mm height ensures excellent readability even from a distance and from different viewing angles.
The window in transparent technopolymer protects the LCD display against accidental shocks.
The high protection class, IP 65 or IP67, makes the indicator suitable for applications that require frequent washing, even with water jets.
In the operating mode, by using the 3 function keys, it is possible to select the incremental or the absolute mode, the unit of measure (mm, inches or degrees) , reset the absolute counter or load a preset source value and the preset offset value.
In the programming mode, through the 3 function keys, it is possible to program the reading after one revolution of the shaft, the direction of rotation , the diplay orientation, the resolution (number of decimal digits displayed), the source value and the offset value , the max. speed of rotation and set the functions of the keys among different options available.
The internal lithium battery ensures long battery life (over 5 years).
A special symbol appears on the display when it is necessary to replace the battery. The replacement can be performed easily by removing the front cover (Fig.1), without disassembly of the indicator from the control shaft and without the loss of configuration parameters.
The 5-digit display of 8,0 mm height ensures excellent readability even from a distance and from different viewing angles.
The window in transparent technopolymer protects the LCD display against accidental shocks.
The high protection class, IP 65 or IP67, makes the indicator suitable for applications that require frequent washing, even with water jets.
In the operating mode, by using the 3 function keys, it is possible to select the incremental or the absolute mode, the unit of measure (mm, inches or degrees) , reset the absolute counter or load a preset source value and the preset offset value.
In the programming mode, through the 3 function keys, it is possible to program the reading after one revolution of the shaft, the direction of rotation , the diplay orientation, the resolution (number of decimal digits displayed), the source value and the offset value , the max. speed of rotation and set the functions of the keys among different options available.
The internal lithium battery ensures long battery life (over 5 years).
A special symbol appears on the display when it is necessary to replace the battery. The replacement can be performed easily by removing the front cover (Fig.1), without disassembly of the indicator from the control shaft and without the loss of configuration parameters.
Gravity position indicator - GA11, GA12 series
GA11 and GA12 gravity position indicators are made out
of polyamide based technopolymer that is reinforced
by glass fibre. These indicators are highly...
of polyamide based technopolymer that is reinforced
by glass fibre. These indicators are highly...
Gravity position indicator - GA11, GA12 series
GA11 and GA12 gravity position indicators are made out
of polyamide based technopolymer that is reinforced
by glass fibre. These indicators are highly...
of polyamide based technopolymer that is reinforced
by glass fibre. These indicators are highly...
Gravity position indicator - MBT-GA
MBT-GA is a black colored knob that has a built-in gravity position indicator. It features a diamond cut knurled knob, an almost unbreakable...
Gravity position indicator - MBT-GA
MBT-GA is a black colored knob that has a built-in gravity position indicator. It features a diamond cut knurled knob, an almost unbreakable window and a dial that can provide both clockwise and counter clockwise graduation. It is highly resistant to solvents, oils, greases and similar chemicals. Materials used in construction involve a glass-fiber reinforced polyamide based technopolymer (knob), technopolymer (bezel), transparent polyamide based technopolymer (window) and natural matte anodised aluminium (dial).
Surface-mounted totalizer counter / 6-digit - PT-1SM
The PT-1SM design is a 6-digit pneumatic totalizing counter. It is
commonly used for the recording of events as well as piece...
commonly used for the recording of events as well as piece...
Surface-mounted totalizer counter / 6-digit - PT-1SM
The PT-1SM design is a 6-digit pneumatic totalizing counter. It is
commonly used for the recording of events as well as piece or
part counting, for indicating program steps, cycle counting, machine
time logging as well as other applications. The system works by adding
a value of one on the display when it receives a pneumatic signal or impulse.
Once the maximum display value is reached it resets to zero. In addition it
can also be reset manually or trough the use of an air impulse.
commonly used for the recording of events as well as piece or
part counting, for indicating program steps, cycle counting, machine
time logging as well as other applications. The system works by adding
a value of one on the display when it receives a pneumatic signal or impulse.
Once the maximum display value is reached it resets to zero. In addition it
can also be reset manually or trough the use of an air impulse.
Up-down counter - USB, 24 bit, 2ch | CNT24-2(USB)GY
CNT24-2(USB)GY is a 24-bit isolation type up-and-down counter module
that is equipped with an USB interface in order...
that is equipped with an USB interface in order...
Up-down counter - USB, 24 bit, 2ch | CNT24-2(USB)GY
CNT24-2(USB)GY is a 24-bit isolation type up-and-down counter module
that is equipped with an USB interface in order to provide a compact
easy to use solution.
It is designed for applications involving positioning control as it incorporates
functions of an encoder and high-speed pulse signal count.
As the external signals are controlled trough the photo-coupler isolated CPU
this module eliminates electric influence on a host computer.
that is equipped with an USB interface in order to provide a compact
easy to use solution.
It is designed for applications involving positioning control as it incorporates
functions of an encoder and high-speed pulse signal count.
As the external signals are controlled trough the photo-coupler isolated CPU
this module eliminates electric influence on a host computer.