+7 (812) 645-08-06
Worm gearmotors
select brand
Worm gear electric gearmotor / right-angle - 20 - 1 680 Nm, 0.18 - 15 kW | RS series
The RS Series worm speed reducers are general purpose applications that come in nine sizes, in addition to fractional and medium power drives. Aluminum die-cast housings and covers are available up to size 85, with cast iron cases available from size 110 upwards....
Worm gear electric gearmotor / right-angle - 20 - 1 680 Nm, 0.18 - 15 kW | RS series
The RS Series worm speed reducers are general purpose applications that come in nine sizes, in addition to fractional and medium power drives. Aluminum die-cast housings and covers are available up to size 85, with cast iron cases available from size 110 upwards....
Worm gear electric gearmotor / right-angle - 20 - 691 Nm, 0.18 - 7.5 kW | RT series
VARVEL's RT series of worm speed reducers is available in 7 sizes, with aluminum casts as housings. It is suitable for power drives that are fractional and regular...
Worm gear electric gearmotor / right-angle - 20 - 691 Nm, 0.18 - 7.5 kW | RT series
VARVEL's RT series of worm speed reducers is available in 7 sizes, with aluminum casts as housings. It is suitable for power drives that are fractional and regular sized, for all-around purpose. It has two modes, the solid shaft input with ball bearing and backstop bearing which easily fits on most VARVEL gearboxes, and the IEC or NEMA flange. The VARVEL RT series comes with sealed grease-packed ball bearings type 2RS, which supports the input shaft, thereby eliminating the need for lubrication permanently. Direct coupling to compatible VARVEL gearboxes is made possible by a halfcoupling together with the RT series.
Double worm electric gearmotor / right-angle - 280 - 2 860 Nm, 0.18 - 4 kW | RA series
The RA Series worm speed reducers are used in general purpose, medium and fractional power drives. The reduction...
Double worm electric gearmotor / right-angle - 280 - 2 860 Nm, 0.18 - 4 kW | RA series
The RA Series worm speed reducers are used in general purpose, medium and fractional power drives. The reduction ratio and efficiencies in this two-stage worm/wheel unit is higher than other devices in the market. Speed reducers are available in nine designs. The housings and covers are made of die cast aluminum up to size 85 and cast iron from size 110. There are single helical stage & worm/wheel units. The device offers ratio up to i=800.
Worm gear electric gearmotor / right-angle - 260 - 3 020 Nm, 0.18 - 3 kW | RS/RS series
The RS/RS Series of Worm Speed Reducers from Varvel consists of a two sealed grease-packed ball bearings type 2RS which supports the input shaft that doesn't need...
Worm gear electric gearmotor / right-angle - 260 - 3 020 Nm, 0.18 - 3 kW | RS/RS series
The RS/RS Series of Worm Speed Reducers from Varvel consists of a two sealed grease-packed ball bearings type 2RS which supports the input shaft that doesn't need any lubrication. They come with a halfcoupling to be used in direct coupling with Varvel gearboxes. Also, it features a back-stop module for them to be mounted with versatile G-coupling input.
Due to their ISM and BSM, it can easily fit on greater number of Varvel gearboxes with an S-input version and a versatile G-coupling. Moreover, they come in 9 different sizes, 85 different aluminum die-cast housing and cover sizes, 110 cast iron sizes, and maximum ratios of 10000.
Due to their ISM and BSM, it can easily fit on greater number of Varvel gearboxes with an S-input version and a versatile G-coupling. Moreover, they come in 9 different sizes, 85 different aluminum die-cast housing and cover sizes, 110 cast iron sizes, and maximum ratios of 10000.
Double worm electric gearmotor / right-angle - 280 - 1 180 Nm, 0.18 - 0.75 kW | TA series
The Varvel TA series Worm speed reducer can be utilized in general purpose, medium and fractional...
Double worm electric gearmotor / right-angle - 280 - 1 180 Nm, 0.18 - 0.75 kW | TA series
The Varvel TA series Worm speed reducer can be utilized in general purpose, medium and fractional power drives to reduce ratios and provide greater efficiency than conventional drives with two-stage worm/wheel units. This reducer's framework is made in aluminum die cast up to size 85 and cast iron of size 110. Furthermore, it is available in 7 sizes.
Helical worm gearmotor
Due to the unique combination of optimized worm wheel material with special lubricants, optimized shape, this powerful motor achieves...
Helical worm gearmotor
Due to the unique combination of optimized worm wheel material with special lubricants, optimized shape, this powerful motor achieves high levels of efficiency and torque. The housing machined on all sides enables diverse mounting options. Double chamber shaft seals are used as standard.
The low contour design makes it suitable for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning - a particularly essential feature for areas with stringent hygiene requirements.
The low contour design makes it suitable for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning - a particularly essential feature for areas with stringent hygiene requirements.
Worm gear gearmotor
The WATT small worm gear is able to adjust themselves with regards to the UNIBLOCK® design optimally in the MAS® geared motor...
Worm gear gearmotor
The WATT small worm gear is able to adjust themselves with regards to the UNIBLOCK® design optimally in the MAS® geared motor...
Synchronous electric gearmotor / AC / worm gear - 0.55 - 15 kW
The PM Synchronous Bauer Geared Motors are compatible with BG-Helical Gearboxes, BF-Parallel Shaft Gearboxes, BK-Bevel Gearboxes, BS-Worm Gearboxes. They are integrated...
Synchronous electric gearmotor / AC / worm gear - 0.55 - 15 kW
The PM Synchronous Bauer Geared Motors are compatible with BG-Helical Gearboxes, BF-Parallel Shaft Gearboxes, BK-Bevel Gearboxes, BS-Worm Gearboxes. They are integrated with compact drive units that are designed with minimal installation space requirement. They adapt an enclosure protection scheme against dust and water spray effects. These motors reduce energy consumption up to almost a percentage of 39 and have a short amortization period.
Each motor has low noise gearing feature and does not demand for high level of maintenance. Change of its lubricant is only applicable after its first 15,000 hours of use. Its engine is built according to EN60034.
Each motor has low noise gearing feature and does not demand for high level of maintenance. Change of its lubricant is only applicable after its first 15,000 hours of use. Its engine is built according to EN60034.
Worm gear electric gearmotor / right-angle - max. 5.5 kW, 25 - 1 000 Nm | BS series
With its unrivaled characteristics, the BS Series Worm Geared Motor is the benchmark in the industry...
Worm gear electric gearmotor / right-angle - max. 5.5 kW, 25 - 1 000 Nm | BS series
With its unrivaled characteristics, the BS Series Worm Geared Motor is the benchmark in the industry for dependability, efficiency, and economy. Its key highlights include a torque range of 25 - 1.000 Nm, output speed of 0.2 - 300 min-1, seal against dust and water spray, noise reduced gearing, mains connection of 110 - 690V, 50/60Hz, and an enclosure of standard IP65 and optional IP66.
Asynchronous electric gearmotor / worm gear - 0.37 - 2.2 kW | AsepticDriveTM
The Bauer AsepticDriveTM is integrated with a smooth surfaced asynchronous motor comprising...
Asynchronous electric gearmotor / worm gear - 0.37 - 2.2 kW | AsepticDriveTM
The Bauer AsepticDriveTM is integrated with a smooth surfaced asynchronous motor comprising a gear box from the notable Bauer 2000 range. Its easy-to-clean framework features aseptic acid and alkali resistant paint (pH2 - pH12) complying in a standard protection class of IP 67 and IP69K for optimum performance that comprises safety.