Brushless motors

select brand


CROUZET

Brushless electric micro-motor / DC - DCmind

This 34 to 192 W DC motors adapts an integrated brushless electronic technology scheme...

Brushless electric micro-motor / DC - DCmind

This 34 to 192 W DC motors adapts an integrated brushless electronic technology scheme with improved accuracy, speed and reliance to its performance. It generally assumes configurable motorization routine with enhance workload capacity due to its modernized set-up. It enables 30 different encoding adjustments with 6 inputs and 4 outputs.

Brushless electric motor / DC / with built-in electronics - max. 205 W

The 57 square brushless DC motors have an increased power capacity that can...

Brushless electric motor / DC / with built-in electronics - max. 205 W

The 57 square brushless DC motors have an increased power capacity that can reach up to 95 W and 24 VDC. The device includes a temperature probe perfect for 6 and 75 VDC voltages. The 57 square is ideal for use in increased ambient temperatures, where control electronics are mounted off center.

Brushless electric micro-motor / DC - 30 - 205 W, 1.2 - 120 Nm

The Crouzet high performance brushless DC geared motors are equipped with SNi10 control...

Brushless electric micro-motor / DC - 30 - 205 W, 1.2 - 120 Nm

The Crouzet high performance brushless DC geared motors are equipped with SNi10 control electronics and are ideal for short operating cycle and continuous low torque applications.
The motors have a compact profile and feature an adjustable closed loop speed, failsafe auto stop after 1s locking, and carried panels and shafts.

Synchronous electric motor / permanent - 0.42 W, 230 V

The direct drive single direction synchronous motors have a fixed speed that adapts according...

Synchronous electric motor / permanent - 0.42 W, 230 V

The direct drive single direction synchronous motors have a fixed speed that adapts according to the supply frequency. The direction of its rotation is controlled by a mechanical anti-return. Additionally, it has a permanent magnet rotor with 5 pole pairs, a strengthened shaft that rotates on two moulded polyamide bearings, and is UL, CSA (class B) - VDE approved.

Synchronous electric motor / permanent - 3.5 W, 0.5 Nm

The Crouzet Single Direction Synchronous Geared Motor has a mechanical strength of...

Synchronous electric motor / permanent - 3.5 W, 0.5 Nm

The Crouzet Single Direction Synchronous Geared Motor has a mechanical strength of 0.5 Nm. It is dependent on the frequency of supply to run at a constant speed. It is also available in various ranges of speed. A long-lasting anti-return device controls the direction of the rotation. It is equipped with a permanent magnet rotor.
FAULHABER

Brushless electric micro-motor / DC - 0.02 - 0.43 mNm, 37 800 - 60.500 rpm

The FAULHABER Brushless DC-Micromotors is a collection of intrinsically designed and technology-based micro...

Brushless electric micro-motor / DC - 0.02 - 0.43 mNm, 37 800 - 60.500 rpm

The FAULHABER Brushless DC-Micromotors is a collection of intrinsically designed and technology-based micro drives. FAULHABER grants linear components, gearheads and electronics for every individual motors.

Every FAULHABER Direct Current Micromotor is compactly made. It is integrated with brushless commutation which is intended for a lasting operational performance. It is also equipped with a flexprint connection.

Brushless electric micro-motor / thin - 0.2 - 7.73 mNm, 6 200 - 41 740 rpm

FAULHABER Flat Brushless Micromotor is a compactly designed ironless coil flat motor which is notable for its speed...

Brushless electric micro-motor / thin - 0.2 - 7.73 mNm, 6 200 - 41 740 rpm

FAULHABER Flat Brushless Micromotor is a compactly designed ironless coil flat motor which is notable for its speed control and efficient performance.

It is light and flat in packaging and is available in different series types. This brushless motor is suitable for heavy duty servo applications even in harsh conditions. It is might as well designed for a non-stop duty tasks when an utmost operational lifetime is necessitated.

Brushless electric motor / DC - 0.36 - 202.0 Mnm | 5 500 - 46 500 rpm

The new FAULHABER Brushless DC-Servomotors are well equipped to meet the needs of demanding applications where size and high performance is detrimental.

Available in high torque...

Brushless electric motor / DC - 0.36 - 202.0 Mnm | 5 500 - 46 500 rpm

The new FAULHABER Brushless DC-Servomotors are well equipped to meet the needs of demanding applications where size and high performance is detrimental.

Available in high torque 4-Pole or high power 2-Pole versions, the FAULHABER aims at compact functional integration with integrated drive electronics, encoders and analog hall sensors, installed in most motors without the need for an encoder.

The various features of the FAULHABER Brushless DC-Servomotors includes high efficiency slot-less design along with a high torque and speed with a small size and low weight. Additionally, it comes with excellent dynamic acceleration or deceleration and low noise present in a variety of sensor options.

Brushless electric motor / DC - 15 - 180 MNm

The innovative FAULHABER BLDC Brushless DC-Gearmotors are designed with an extremely compact integrated...

Brushless electric motor / DC - 15 - 180 MNm

The innovative FAULHABER BLDC Brushless DC-Gearmotors are designed with an extremely compact integrated spur gearhead for speed reduction and a significant increase of the available output torque. The compact housing design comes in various reduction ratios. The extremely compact, smooth and quiet design comes with a wide range of reduction ratios in the same motor size

Brushless electric motor / DC / with integrated controller - 1.8 - 73 | 5 300 - 16 300 rpm

This technology enhanced motor with speed controller attachment utilizes brushless DC engine with parallel...

Brushless electric motor / DC / with integrated controller - 1.8 - 73 | 5 300 - 16 300 rpm

This technology enhanced motor with speed controller attachment utilizes brushless DC engine with parallel improvement on the system performance. It also uses an overhauled electronic drive within an extensive housing of sturdy construction which is run by a systematically coordinated current setting. Its speedy operations is attained through a PI control panel which is equipped with an external voltage set-up console.
Johnson Electric

EC electric motor - ø 24 mm, 12 V, 1.45 W | E4 series

Designing products that range from HVAC valves to power tools, the EC motor series laid its team consisting of brushless motors.

Customization...

EC electric motor - ø 24 mm, 12 V, 1.45 W | E4 series

Designing products that range from HVAC valves to power tools, the EC motor series laid its team consisting of brushless motors.

Customization to enhance the controllability, efficiency, long life, and its low noise characteristics is possible to achieve the requirements of specialized applications.

The automotive applications are under the improvement for the transmission, cooling of engines and engine management.

This product and its performance detail are also available in its pdf datasheet.

EC electric motor - ø 30 mm, 12 V, 1.43 - 1.7 W | E5 series

A platform of brushless motors is provided by the EC motor series for use by engineers who are designing products which range from HVAC valves to power tools....

EC electric motor - ø 30 mm, 12 V, 1.43 - 1.7 W | E5 series

A platform of brushless motors is provided by the EC motor series for use by engineers who are designing products which range from HVAC valves to power tools. Under development are automotive applications for engine cooling, engine management and transmission. The needs of specialized applications can be met by custom engineering the long life, low noise, high efficiency and controllability characteristics of this motor technology.

Johnson Electric can be contacted for information relating to the range of platform motors, their performance details, sampling availability and any custom engineering requirements.

EC electric motor - ø 38 mm, 12 V, 2.54 - 2.8 W | E6 series

The EC motor series offers a platform of brushless motors for engineer's designing items varying from HVAC valves to power tools. Automotive...

EC electric motor - ø 38 mm, 12 V, 2.54 - 2.8 W | E6 series

The EC motor series offers a platform of brushless motors for engineer's designing items varying from HVAC valves to power tools. Automotive applications are under progress for transfer, and engine control/cooling. The high functionality, longevity, controllability, and minimal noise attributes of this motor technology can be customized to satisfy the demands of specific applications.

Meanwhile, the motors' performance data are kept in the product datasheet (PDF). For sample availability and custom engineering needs, you may contact us.

EC electric motor - ø 42.2 mm, 24 V, 49.5 W | E7 series

The Johnson Electric EC motor series is a range of high-performance brushless motors for engineers designing products ranging from HVAC valves to power...

EC electric motor - ø 42.2 mm, 24 V, 49.5 W | E7 series

The Johnson Electric EC motor series is a range of high-performance brushless motors for engineers designing products ranging from HVAC valves to power tools. These EC motors can be custom engineered to meet the desired requirements for controllability, high efficiency, long life, and quiet operation suitable in such industries like automotive for development of transmission, engine cooling, and engine management.

For further inquiries regarding these EC motors kindly check the attached pdf product datasheet and contact us for sample availability and desired customization.

EC electric motor - ø 48 mm, 14.4 - 21.6 V, 250 - 488 W | E8 series

The EC motor series offers a platform of brushless motors for engineer's designing applications varying from HVAC valves to power tools. Automotive...

EC electric motor - ø 48 mm, 14.4 - 21.6 V, 250 - 488 W | E8 series

The EC motor series offers a platform of brushless motors for engineer's designing applications varying from HVAC valves to power tools. Automotive applications are under progress for transmission, and engine cooling and management. The high functionality, longevity, controllability, and minimal noise attributes of this motor technology can be custom engineered to satisfy the demands of specialized applications.

The pdf product datasheet keeps the performance information of these motors. For sample availability and your custom engineering requirements, you may contact us.
{{item.name}}