Worm gear reducers

select brand


ATEK Antriebstechnik

Worm gear reducer - i= 5:1 - 26:1, max. 1 100 Nm | SLC series

The Type SLC is a worm gearbox designed for installation on servo motors. It features a drive end...

Worm gear reducer - i= 5:1 - 26:1, max. 1 100 Nm | SLC series

The Type SLC is a worm gearbox designed for installation on servo motors. It features a drive end with a square flange and clamping coupling to ensure an efficient work output.

The gearbox works with an acceleration torque of 1100 Nm and a transmission ratio that ranges from 5:1 to 26:1. The enhanced torsional rigidity of the gearbox leads to minimum circumferential backlash.

Worm gear reducer / right-angle - i= 5:1 - 83:1, max. 13.72 Nm | S series

The S series is manufactured by ATEK Antriebstechnik. This right-angle...

Worm gear reducer / right-angle - i= 5:1 - 83:1, max. 13.72 Nm | S series

The S series is manufactured by ATEK Antriebstechnik. This right-angle worm gear reducer, has nominal transmission ratios of i= 5:1 to 83:1, and maximum torque of 13720 Nm. It has a free drive and output shafts, with 9 from axle base sizes a = 040 mm up to 250 mm.

Worm gear reducer / right-angle - SL series

The SL is a type of worm gearbox manufactured by Atek. It can be installed on an IEC standard...

Worm gear reducer / right-angle - SL series

The SL is a type of worm gearbox manufactured by Atek. It can be installed on an IEC standard motor.

The unit features a nominal transmission ratio of 05:1 to 83:1. It has a maximum output torque of 17,720 Nm. The device comes in 9 axle base sizes from 040 mm to 250 mm. It is equipped with motor latern and coupling in the drive side.
BERNIO ELETTROMECCANICA

Worm gear reducer / right-angle - i = 10.5 - 69 | VSF 26 Nema 23

The VSF 26 NEMA 23 Systems are warm gearboxes with casted aluminum frames delrin. They...

Worm gear reducer / right-angle - i = 10.5 - 69 | VSF 26 Nema 23

The VSF 26 NEMA 23 Systems are warm gearboxes with casted aluminum frames delrin. They...

Worm gear reducer / right-angle - max. 5 920 Nm | NA, FA series

The NA/FA series provides maximum heat dissipation, universal mounting, and various coupling options. The gearbox is composed...

Worm gear reducer / right-angle - max. 5 920 Nm | NA, FA series

The NA/FA series provides maximum heat dissipation, universal mounting, and various coupling options. The gearbox is composed of lubrication properties, for long service life.

The unit is designed with die cast aluminium material on all sides. Its worms are made from a hardened, and peeled steel. Also, the device's worm gears are constructed from bronze material, which are made with a centrifugal process.

Models in the series are available in a wide range of versions.

Worm gear reducer / right-angle / low-backlash - max. 375 Nm | NHS series

The NHS series is a low backlash positioning and drive units. The series utilizes the Duplex worm gear principle. The device contains two...

Worm gear reducer / right-angle / low-backlash - max. 375 Nm | NHS series

The NHS series is a low backlash positioning and drive units. The series utilizes the Duplex worm gear principle. The device contains two worm and a worm gear. The backlash is adjusted to a minimum with the use of axial displacement.

Without the need to disassemble the gearbox, additional adjustments on the backlash may happen. The device is made of steel and a spheroidal graphite casting. The gearbox consist of 4 models and 2 standard ratios. The casing of the device is fully machined and can be mounted to any position.
{{item.name}}