+7 (812) 645-08-06
Bevel gear reducers
select brand
Helical gear reducer / bevel - ML series
Spiral bevel gearboxes are designed with helical structure, that are available in models K, L, H, LS, LV, MK, ML, MH and UL sizes that range between 50 to 600 unit...
Helical gear reducer / bevel - ML series
Spiral bevel gearboxes are designed with helical structure, that are available in models K, L, H, LS, LV, MK, ML, MH and UL sizes that range between 50 to 600 unit...
Helical gear reducer / bevel / right-angle - MH series
Spiral bevel gearboxes from Vogel are robust units with corrosion protection and can deliver torques from 10 to 8,500Nm. These are employed for the operation of various...
Helical gear reducer / bevel / right-angle - MH series
Spiral bevel gearboxes from Vogel are robust units with corrosion protection and can deliver torques from 10 to 8,500Nm. These are employed for the operation of various kinds of valves such as globe valves, gate valves, etc. These gearboxes offer three different gear teeth, that is, MH 50 Klingenberg spiral bevel toothing, MH 100 and MH 200 Klingelnberg spiral bevel toothing ground.
Servo spiral bevel gearboxes are equipped with a rotator that rotates in opposite directions at the C and A faces. The gear can be mounted in any position and are lubricated with oil. Various versions through size options 50 to 600 are available.
Servo spiral bevel gearboxes are equipped with a rotator that rotates in opposite directions at the C and A faces. The gear can be mounted in any position and are lubricated with oil. Various versions through size options 50 to 600 are available.
Helical gear reducer / bevel / right-angle - 100 - 13 000 Nm, i= 6:1 - 48:1 | MKS series
The Bevel helical line of gearboxes is fitted with MKS 1 and MKS 4 gear teeth in addition to a K lingelnberg spiral bevel toothing ground. The device features opposite direction rotation...
Helical gear reducer / bevel / right-angle - 100 - 13 000 Nm, i= 6:1 - 48:1 | MKS series
The Bevel helical line of gearboxes is fitted with MKS 1 and MKS 4 gear teeth in addition to a K lingelnberg spiral bevel toothing ground. The device features opposite direction rotation...
Helical gear reducer / bevel / explosion-proof - ATEX | MKSH series
These ATEX approved helical gearboxes feature the MKSH 1, MKSH 4 Klingelnberg spiral bevel toothing ground. They have rotation direction that is opposite...
Helical gear reducer / bevel / explosion-proof - ATEX | MKSH series
These ATEX approved helical gearboxes feature the MKSH 1, MKSH 4 Klingelnberg spiral bevel toothing ground. They have rotation direction that is opposite...
Bevel servo-gearbox / helical / right-angle - max. 150 Nm, i= 3:1 - 10:1 | SK(N) series
The Servo spiral bevel gearboxes by Vogel Antriebstechnik is a Klingelnberg spiral bevel toothing with a gear teeth of SK (N) 050 SK(N) 200. The direction of its rotation...
Bevel servo-gearbox / helical / right-angle - max. 150 Nm, i= 3:1 - 10:1 | SK(N) series
The Servo spiral bevel gearboxes by Vogel Antriebstechnik is a Klingelnberg spiral bevel toothing with a gear teeth of SK (N) 050 SK(N) 200. The direction of its rotation...
Bevel gear reducer / right-angle - i= 1:1 - 4:1, max. 16 Nm | L series
The L series from ATEK Antriebstechnik, is a lightweight bevel gear reducer...
Bevel gear reducer / right-angle - i= 1:1 - 4:1, max. 16 Nm | L series
The L series from ATEK Antriebstechnik, is a lightweight bevel gear reducer with transmission ratios of i= 1:1 - 4:1, and maximum torque of 16 Nm. It is a continuous shaft, with 2 gear unit sizes from 035 mm to 045 mm edge length. The robust aluminum housing is corrosion and heat resistant.
Bevel gear reducer / right-angle - i= 1:1 - 6:1, max. 5 400 Nm | V series
Atek's V Series is part of the company's line of bevel gearboxes. Models of the series...
Bevel gear reducer / right-angle - i= 1:1 - 6:1, max. 5 400 Nm | V series
Atek's V Series is part of the company's line of bevel gearboxes. Models of the series exhibit continuous shafts, slow running capabilities, and transmission ratios (i) that range from 1:1 to 6:1. They also showcase maximum output torque ratings (T2 max) of 5.400 Nm, and 9 gear unit sizes that range from 065 mm to 350 mm.
Bevel gear reducer / right-angle - i= 1:1 - 6:1 | VL series
Manufactured by Atek, the VL series is a drive end housed in a motor bell,...
Bevel gear reducer / right-angle - i= 1:1 - 6:1 | VL series
Manufactured by Atek, the VL series is a drive end housed in a motor bell, and equipped with a hollow shaft. The unit can be installed with an IEC standard motor.
It is equipped with a transmission ratio of i = 1:1 to 6:1, and max. output torque of up to T2 = 5.400 Nm.
It is equipped with a transmission ratio of i = 1:1 to 6:1, and max. output torque of up to T2 = 5.400 Nm.
Bevel gear reducer / right-angle - i = 1.5:1 - 2:1, max. 650 Nm | VS series
The VS series is a bevel gearbox that is integrated with a shaft which...
Bevel gear reducer / right-angle - i = 1.5:1 - 2:1, max. 650 Nm | VS series
The VS series is a bevel gearbox that is integrated with a shaft which steadily operates at high speeds. Its transmission ratio is available in i = 1.5:1 and 2:1. This bevel gearbox is also available in a number of gear unit sizes ranging from 90 mm up to 260 mm in edge length.
Helical gear reducer / bevel / compact - i= 3:1 - 15:1, 22 - 1 400 Nm | VP, VPC series
The Type VP and VPC bevel gear boxes represent highly compact drive units, intended for highly dynamic applications in automation engineering. They feature drive speeds of up to 8,000 rpm and output torques of up...
Helical gear reducer / bevel / compact - i= 3:1 - 15:1, 22 - 1 400 Nm | VP, VPC series
The Type VP and VPC bevel gear boxes represent highly compact drive units, intended for highly dynamic applications in automation engineering. They feature drive speeds of up to 8,000 rpm and output torques of up to 1,400 Nm, as well as a design that accounts for working with servomotors, offering added flexibility and compatibility with various applications. These series offer 280 standardized variants due to the selection of 6 gear sizes, 8 gear ratios and 6 types of output shafts. High flexibility of these units is largely due to modular construction of motor flange at the input side, allowing exchangeable and standardised motor flange plates to be selected and fixed according to specific application needs. In addition, the range includes over 120 different types of motor flange plates, supporting almost all types of servomotors.
Helical gear reducer / bevel / for high torque
CAT manufactures and designs high quality gearboxes in accordance with AGMA and DIN standards. With expertise in the refurbishment...
Helical gear reducer / bevel / for high torque
CAT manufactures and designs high quality gearboxes in accordance with AGMA and DIN standards. With expertise in the refurbishment and overhauling of gearboxes of any size and make,they find application in main winches drives for container cranes, non-iron and steel industry, walking beam drives, flying shears, Ground equipment for space and aeronautical industry, gearboxes for antennas and radio-telescopes and also in the manufacturing industry for example, cane and beetroot sugar mills.