Plain bearings, bushings

select brand


Radial plain bearing / thermoplastic - -30 °C ... +80 °C | 01.4065.5051

The flanged bearing sleeve is a radial bush manufactured with a rolled body made of polyamide 66 material through injection molding. The bush exhibits resistance...

Radial plain bearing / thermoplastic - -30 °C ... +80 °C | 01.4065.5051

The flanged bearing sleeve is a radial bush manufactured with a rolled body made of polyamide 66 material through injection molding. The bush exhibits resistance...

Radial plain bearing / galvanized steel - -200 °C ... +280 °C | P14 series

Bearing bush Type P14 is a universal radial bush manufactured with a rolled body made of galvanized steel material and a butt joint. The bush is covered with a...

Radial plain bearing / galvanized steel - -200 °C ... +280 °C | P14 series

Bearing bush Type P14 is a universal radial bush manufactured with a rolled body made of galvanized steel material and a butt joint. The bush is covered with a...

Robust plain bearing - ø 1 - 75 mm | iglidur® M250 series

The rugged iglidur M250 bearings are vibration dampening and wear resistant. They...

Robust plain bearing - ø 1 - 75 mm | iglidur® M250 series

The rugged iglidur M250 bearings are vibration dampening and wear resistant. They help to minimize noise and balance edge loads extremely well in applications which have low speeds.

The iglidur M250 bearings can be supplied as plain bearings with flanges, thrust washers and cylindrical bearings.

Plain bearing - ø 1.5 - 150 mm | iglidur® G series

The iglidur G bearings fulfill a wide range of different requirements which is the reason...

Plain bearing - ø 1.5 - 150 mm | iglidur® G series

The iglidur G bearings fulfill a wide range of different requirements which is the reason for terming this material as universal. Medium to high loads, medium surface speeds and moderate temperature applications are recommended.

The iglidur G bearings can be supplied as plain bearings with flange, thrust washers and cylindrical bearings.

High-wear-resistance plain bearing / robust - ø 2 - 100 mm | iglidur® W300 series

The iglidur® W300 from IGUS PLASTICS are made from wear-resistant material for rough shafts,...

High-wear-resistance plain bearing / robust - ø 2 - 100 mm | iglidur® W300 series

The iglidur® W300 from IGUS PLASTICS are made from wear-resistant material for rough shafts,...

Cost-effective plain bearing - ø 3 - 95 mm | iglidur® P series

Owing to heat constancy and low damp absorption, the iglidur® P bearings...

Cost-effective plain bearing - ø 3 - 95 mm | iglidur® P series

Owing to heat constancy and low damp absorption, the iglidur® P bearings...

Composite plain bearing / high-temperature - ø 4 - 120 mm | iglidur® Z series

Extremely high compressive strength coupled with high elasticity enables iglidur® Z bearings to attain their prominent features in association...

Composite plain bearing / high-temperature - ø 4 - 120 mm | iglidur® Z series

Extremely high compressive strength coupled with high elasticity enables iglidur® Z bearings to attain their prominent features in association...
Meusburger Georg GmbH & Co KG

Ball guide bushing

In spite of a compact design, this product can be used for numerous...

Ball guide bushing

In spite of a compact design, this product can be used for numerous strokes, is space saving and works best with 2 ejector sets in the same mould. The dimensions are suitable for the ejector plates and the product is in-stock with guide-bolts at Meusburger.
{{item.name}}