Ball bearings

select brand


GMN

Ball bearing / rigid

High precision radial deep groove ball bearings offer the best solution in cases where transmission of axial loads from two directions is needed and where the existing space restricts installation of matched spindle bearings, the rotating...

Ball bearing / rigid

High precision radial deep groove ball bearings offer the best solution in cases where transmission of axial loads from two directions is needed and where the existing space restricts installation of matched spindle bearings, the rotating parts need optimal guidance accuracy and speed is of less importance. Based on the required load carrying capacity and the available space, GMN offers deep groove ball bearings that ranges from 60.. and 62.. as per DIN 625. The presence of large number of different cages, lubricants and closures enables tp design bearing execution to fit most applications. GMN application engineers can also specify the necessary radial clearance if needed. GMN extra wide special bearings with its extended grease reservoir enhances speed and service life. The hybrid version of GMN bearings provides additional increase in speed. The grease lubrication supports the users to achieve highest machining speeds.

Ball bearing / ceramic / hybrid

Hybrid ball bearings offer enormous advantages compared to pure steel / steel bearings with regard to speed, load capacity,...

Ball bearing / ceramic / hybrid

Hybrid ball bearings offer enormous advantages compared to pure steel / steel bearings with regard to speed, load capacity, rigidity and service life. The ball bearings have rings of steel and the ball are made of ceramic. The material predominantly consists of silicon nitride Si3N4.

Numerous trials and successful use in the field confirm the advantages of hybrid ball bearings.

All ball bearings of the GMN production range are available as hybrid bearings.

Ball bearing / high-accuracy

The High-Precision Ball Bearing, manufactured by GMN, is specifically designed with angular contact ball bearings of α0 = 15°/25° and. This bearing is configured...

Ball bearing / high-accuracy

The High-Precision Ball Bearing, manufactured by GMN, is specifically designed with angular contact ball bearings of α0 = 15°/25° and. This bearing is configured...

Ball bearing / spindle

The spindle ball bearings are manufactured by GMN company. They are angular bearings with a force...

Ball bearing / spindle

The spindle ball bearings are manufactured by GMN company. They are angular bearings with a force...

Ball bearing / for machine tools

Spindle ball bearings manufactured by GMN are characterized by their highly...

Ball bearing / for machine tools

Spindle ball bearings manufactured by GMN are characterized by their highly durable design and their capability to carry heavy loads. They possess radial and axial features due to their sheer number of balls. Adjustment on several bearing are essential and sizes may vary from 5 to 70 mm and 75 to 120 mm.
NSK Europe Ltd.

Ball bearing / angular-contact - NSKHPS

NSK presents one among the most complete choices of Angular Contact Ball Bearings which have been planned to convene unique tools difficult necessities of manufacturers. These bearings contain a call angle, which allows them to endure considerable...

Ball bearing / angular-contact - NSKHPS

NSK presents one among the most complete choices of Angular Contact Ball Bearings which have been planned to convene unique tools difficult necessities of manufacturers. These bearings contain a call angle, which allows them to endure considerable axial weights in one course together among radial loads. They are usually employed in duos, triplex puts, quadruple sets, or many sets as an axial unit is created while a radial weight is applied. Product characteristics and advantages: first-rate Steel - Ultra hygienic steel to expand bearing existence by equal to 80 percent. Sophisticated oil skill - NSK oils that can expand oil life and presentation. High Rank Balls - Silent and even function even at elevated velocity. Wonderful Finished shafts - particularly sharpened to reduce sound and develop lubricant delivery and time. Call direction - presented in 40, 30, 25, and 15 degree angles. Original Seals - offer confrontation to pollution in the...

Ball bearing / double-row / angular-contact / long-life

NSK double row angular contact ball bearings use PA46 plastic cage which...

Ball bearing / double-row / angular-contact / long-life

NSK double row angular contact ball bearings use PA46 plastic cage which helps in achieving lower weights, while providing cost savings. The cage provides excellent resistance to oil and heat. Ideal preload levels are achieved using the initial internal clearance.

Ball bearing / long-life / flange / automobile

The outer ring has a mounting flange and...

Ball bearing / long-life / flange / automobile

The outer ring has a mounting flange and splines, which attached to the one-way clutch. This affords greater compactness of FF-type automatic transmissions

Ball bearing / long-life

NSK durable bearings are designed with strengthened rolling element (Ball) to prevent surface flaking. The bearing life exceeds at least 3 times more in comparison with usual technology...

Ball bearing / long-life

NSK durable bearings are designed with strengthened rolling element (Ball) to prevent surface flaking. The bearing life exceeds at least 3 times more in comparison with usual technology for the inner bearing and outer rings. It also features its 10 times more bearing life when used in combination with NSKs proprietary long-life ring heat-treatment technology (UR,HTF). The bearings are made with special carbonitriding heat-treatment technology together with deposit of hard, minute particles of Si-nitride on the ball. The bearings with prolonged service life make the bearing size to go down which enables it to reduce weight of about 50 percent which in turn yields into a 12 percent lowering of torque.

Ball bearing / wet / flange / for shafts - ø 5 - 50 mm | igubal® series

igubal® flange bearings, specially created for the bearing of shaft ends or shaft bushings, consists of igumid G housing and iglidur® W300 using a spherical ball. The igubal® flange bearings are equipped...

Ball bearing / wet / flange / for shafts - ø 5 - 50 mm | igubal® series

igubal® flange bearings, specially created for the bearing of shaft ends or shaft bushings, consists of igumid G housing and iglidur® W300 using a spherical ball. The igubal® flange bearings are equipped...

Ball bearing / self-aligning / maintenance-free - ø 2 - 30 mm | igubal® series

The igubal spherical bearings offer simple handling for a manifold application. They can be used wherever the self-aligning bearings offer constructive advantages or assist in simplifying the installation.

The igubal spherical...

Ball bearing / self-aligning / maintenance-free - ø 2 - 30 mm | igubal® series

The igubal spherical bearings offer simple handling for a manifold application. They can be used wherever the self-aligning bearings offer constructive advantages or assist in simplifying the installation.

The igubal spherical bearings are maintenance-free and have a tolerance in the inner diameter according to E10. A tolerance between h6 and h9 is expected in the shaft and, during heating, the bearing clearance compensates for bearing expansions.

The igubal spherical bearings are axially-locked and are press-fitted in an H7 bore. The spherical bearing automatically compensates for error so that a precise alignment of the bearing housing is not needed.

The igubal spherical bearings have been manufactured to comply with DIN ISO 12240 standards in the dimensional series E and K.

Dimensions ranging from 5 to 30 mm are included in the delivery program. However, different dimensions can be requested.

Ball bearing / double-row / custom / stainless steel - ø 10 - 20 mm | xirodur® B180 series

Xirodur® B180 polymer ball bearing is used mainly on conveyor machines, packaging plants and custom machine fabrication applications. B180 bearing has a double row structural...

Ball bearing / double-row / custom / stainless steel - ø 10 - 20 mm | xirodur® B180 series

Xirodur® B180 polymer ball bearing is used mainly on conveyor machines, packaging plants and custom machine fabrication applications. B180 bearing has a double row structural...

Ball bearing / inch-size / stainless steel / polymer - ø 3/8 - 2 in | xiros® B180

Inch dimensions are now available for xirodur® B180 polymer ball bearings! In combination with the PA cage, and either glass or stainless...

Ball bearing / inch-size / stainless steel / polymer - ø 3/8 - 2 in | xiros® B180

Inch dimensions are now available for xirodur® B180 polymer ball bearings! In combination with the PA cage, and either glass or stainless...

Ball bearing / polymer / high-temperature / for plastics - ø 3 - 20 mm | xiros® A500

Xiros® polymer ball bearings are the new generation of plastic ball bearings that have found their way into many industrial applications. With Xirodur® A500 inner and outer rings, the...

Ball bearing / polymer / high-temperature / for plastics - ø 3 - 20 mm | xiros® A500

Xiros® polymer ball bearings are the new generation of plastic ball bearings that have found their way into many industrial applications. With Xirodur® A500 inner and outer rings, the...
{{item.name}}