+7 (812) 645-08-06
Collets
select brand
ER chuck collet - ø 2.0 - 14.9 mm | FD430E series
The FD430E series is manufactured by Formdrill, and is a collet that is mainly...
ER chuck collet - ø 2.0 - 14.9 mm | FD430E series
The FD430E series is manufactured by Formdrill, and is a collet that is mainly utilized for hard metal tools, which the holder is important for the long service life, safety factor and dependability of the tool. It is available in diameters of 2.0 mm to 14.9 mm, which has a tool holder in either FDMC2 or FDCYL430.
ER chuck collet - ø 10.0 - 25.4 mm | FD470E series
The FD 470 collet is engineered to tend to the applications that are concerned with hard...
ER chuck collet - ø 10.0 - 25.4 mm | FD470E series
The FD 470 collet is engineered to tend to the applications that are concerned with hard metal tools. This tool handler is able to provide the operators with longer operational lives as well as increased too safety, and dependability. Moreover, this unit may also function as a cooling ring that takes the generated heat, and protects the spindle.
HSK petal chuck collet - SSK series
The HSK petal collet SSK series is manufactured by Nuova Bellodi TIBI...
HSK petal chuck collet - SSK series
The HSK petal collet SSK series is manufactured by Nuova Bellodi TIBI srl. The product has unblocking stroke standard and it has unblocking shon stroke. The product comes with an external thread and internal thread while the pull sxds has presetting tool holscr.
HSK petal chuck collet - max. 15 kN | HSK series
The HSK series is manufactured by Rebo, and is gripper that is ideal for use in clamping...
HSK petal chuck collet - max. 15 kN | HSK series
The HSK series is manufactured by Rebo, and is gripper that is ideal for use in clamping operations. The unit is protected from various objects such as wood, silica powders, corrosion, cuffing, and as well as chatters. The unit does not require any preventive servicing when used in short-term, and medium-term applications.
ER chuck collet - max. 50 mm | ERT, GRS
The ERT series, and the GRS series are manufactured by Bellodi Tibi, and are ER collets. In order for the user...
ER chuck collet - max. 50 mm | ERT, GRS
The ERT series, and the GRS series are manufactured by Bellodi Tibi, and are ER collets. In order for the user to insert the unit, the collet must be inserted into the nut at an oblique angle and rotate it up to link the eccentric ring with the collet groove. Then the user must screw the nut with the collect-chuck. The user then inserts the tool inside at the collect and to screw and to block the nut with a particular wrench.